IONIC ONE1051039 IONIQ 5 Instructions
- June 10, 2024
- ionic
Table of Contents
IONIC ONE1051039 IONIQ 5
Instructions
VISION ROOF (IF EQUIPPED)
If your vehicle is equipped with a vision roof, you can slide open the power sunshade and an all-glass roof appears.
Power sunshade
Use the power sunshade to block direct sunlight coming through the vision roof glass.
The power sunshade can only be operated when Start/Stop button is in the ON or START position.
- Push the switch rearward, the power sunshade automatically slides open.
- Push the vision roof switch forward, the power sunshade automatically closes.
To stop the power sunshade at any point, push the switch in any direction.
Information
- The power sunshade can be operated for approximately 3 minutes after the Start/Stop button is in the ACC or OFF position. However, if the front door is open, the power sunshade cannot be operated even within the 3 minute period.
- Wrinkles formed on the power sunshade are normal due to material characteristic.
WARNING
- Adjust the power sunshade when your vehicle stops. This could result in loss of control and an accident that may cause injury, or property damage.
- Do not leave the vehicle running and the key in your vehicle with unsupervised children. Unattended children could operate the power sunshade, which could result in injury.
- Do not sit on the top of the vehicle. It may cause injury or vehicle damage.
NOTICE
Do not pull or push the power sunshade by hand as such action may damage the power sunshade or cause it to malfunction.
Automatic reversal
If the power sunshade senses any obstacle while it is closing automatically, it will reverse direction then stop at a certain position.
The auto reverse function may not work if an object thin or soft is caught between the sliding power sunshade and vision roof sash.
WARNING
- Make sure heads, hands, arms or any other body parts or objects are out of the way before operating the power sunshade . Body parts or objects may get caught causing injuries or vehicle damage.
- Never deliberately use your body parts to test the automatic reversal function. The power sunshade may reverse direction, but there is a risk of injury.
NOTICE
Do not continue to push the switch after the power sunshade is fully opened or closed. Damage to the power sunshade motor could occur.
Resetting the Vision Roof
In some circumstances resetting the power sunshade operation may need to be performed. Some instances where resetting the power sunshade may be required include:
- When the 12-volt battery is either disconnected or discharged
- When the power sunshade fuse is replaced
- If the power sunshade one-touch AUTO OPEN/CLOSE operation is not functioning properly
Vision roof resetting procedure:
- It is recommended to perform the reset procedure with the vehicle in the ready mode. Start the vehicle in P (Park).
- Make sure the power sunshade is in the fully closed position. If the power sunshade is open, push the switch forward until the power sunshade and is fully closed.
- Release the switch when the power sunshade is fully closed.
- Push the switch forward until the power sunshade moves slightly. Then release the switch.
- Once again push and hold the switch forward until the power sunshade slides open and close. Do not release the switch until the operation is completed.
If you release the switch during operation, start the procedure again from step 2.
Information
If the power sunshade is not reset when the vehicle battery is disconnected or discharged, or the power sunshade fuse is blown, the power sunshade may not operate normally.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>