Metropwr FXMASTER 8 Band Audio Equalizer User Manual
- June 4, 2024
- Metropwr
Table of Contents
FX MASTER 8 Band Audio Equalizer
User Manual
https://www.metropwr.com/firmware/
INTRODUCTION
FXMASTER is an 8-band equalizer with an adjustable noise gate and reverb. This device has the ability to interface any type of studio microphone from different brands and switch it to 2 radios. The high audio quality allows you to transform even new/old radios to make hifiSSB. The audio can be perfectly amplified and equalized to adapt it to any type of microphone. It handles dynamic studio condenser microphones or ICOM, YAESU, KENWOOD, and other commercial microphones. All microphones can be connected directly without having to make new connections or adapters. FX MASTER has an internal switch to be able to use 2 radios at the same time. A lead allows indicating an overflow of the bf signal. It has two XLR studio microphone jack inputs. Through a standard jack / XLR cable it is possible to connect dynamic and condenser studio microphones with phantom power. The +48V phantom voltage is generated by an internal card that can be purchased as an option.
| MODEL | RELEASE | FIRMWARE |
|---|---|---|
| https://www.metropwr.com/ | https://www.metropwr.com/| 
http://www.metropwr.com/Download/MANUAL/FX775/MANUALE%20IT%20FX773-FX775.pdf
IMPORTANT INFORMATION
The use of this device may be subject to national restrictions or regulations.
Check your local authority or dealer before purchasing and using this product.
Read all the operational instructions, safety recommendations, and warnings in
the instruction manual. By identifying in time the potentially hazardous
situations and observing the appropriate safety rules, they will avoid
accidents. Hazardous situations are to be avoided in order to prevent all
risks that are shown above. Never use the FX MASTER inappropriately, but only
as directed by the user. The Manufacturer reserves the right to update the
technical data contained in this manual without notice.
Schematic Balanced 3.5mm TRS to XLR
XLR / Jack 3.5mm
TECHNICAL FEATURES
– 8-band equalizer
– adjustable noise gate
– slow fast attack speed adjustable
– reverb/delay
– input/output 600 ohm
– possibility to connect 2 radios at the same time (switch Radio A/B)
– possibility to connect 6 types of microphones at the same time
– Heil Sound headphone microphone input or other
– input for a dynamic microphone XLR connection
– optional input for studio microphones with phantom +48V
– input remote PTT
– input Audio Radio to power the headphone
– Overload/PTT led / dimension 170x113x30mm
Crossed-out Wheeled Bin Symbol
Equipment marked with the Crossed-out Wheeled Bin Symbol complies with council
directive 2002/96/EC (the “WEEE Directive”) in European Union. For Products
placed on the EU market after August 13, 2005, please contact your local
representative at the end of the product’s useful life to arrange disposal in
accordance with your initial contract and the local law.
DECLARATION OF CONFORMITY
Manufacturer’s: Metropwr SAS
Product Model: FX MASTER
REAL PANEL AND CONNECTIONS
Cut one end of the cable and solder the 8-pin connector. RADIO A/B outputs use
the same cable, you can make 2 cables for Yaesu and Icom or Kenwood and use
them to connect 2 different radios. You can switch radios via the OUT A/B
switch.
You can connect microphones of different brands even at the same time. *In
case of condensation studio microphone is used, it would be possible to
install an internal card that generates the +48V phantom voltage
(optional)
MIC+48V (OPTIONAL)
SCHEMATIC RJ45/8 pin cable
A simple Cat 6/7 Lan cable with a maximum length of 2m can be used. For
operation without up/down commands 5 wires can be connected. Otherwise, all 8
wires but only the RADIO/A output have support for mic up/down commands.
FX MASTER Includes RJ45/RJ45 cable for Yaesu radio FTDX10, FT991A,
FT857/859, FT891, and compatible + 8 PIN CONNECTOR to be soldered.
RJ45 / 8PIN CABLE DIAGRAM
Connection Tables
RJ45 PIN
SIGNAL| 8 PIN ICON| RJ45 PIN| 8 PIN YAESU| RJ45 PIN
SIGNAL| 8 PIN KENWOOD
---|---|---|---|---|---
1| UP/DW| 3| 1| DOWN| 3| 1| DOWN| 3
2| SQL| 4| 2| UP| 1| 2| UP| 4
3| +8V| 2| 3| +5V| 2| 3| +8V| 5
4| MIC AND| 7| 4| MIC AND| 7| 4| MIC GN| 7
5| MIC| 1| 5| MIC| 8| 5| MIC| 1
6| PTT| 5| 6| PTT| 6| 6| PTT| 2
7| GND| 6| 7| GND| 5| 7| GND| 8
8| AF| 8| 8| FAST| 4| 8| NC| NC
***** Optional (no up/DW)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>