DMSmart R9 Smart Lock User Manual

DMSmart R9 Smart Lock

Function and Operation

Description of terms and functional keys:

1. Administrator information: refers to the administrator’s fingerprint, password.
2. Unlock information: refers to the input fingerprint, password ( including ordinary users and administrators ).
3. Key “*”: clear key / back key. Enter the paaword and point by clearing the previous input. Click the clear key three times in succession, empty all input.
4. Key “#”: confirmation key or menu funciton key.

Orginal state

1. The factory administrator initial password is “123456”, under the initial state any fingerprint or
   password can open the lock.

2. Any fingerprint or password which are not input cannot open the lock after inputting the administrator information.

Access door lock function management (step one)

Administrator settings

1. Add administrator (step 2)
2. ) Delete administrator information

Common user setting

1. Add administrator information
2. Delete user information

System setting

1. Voice setting
2. Unlock mode setting
3. Language setting
4. Time setting
5. Room number modification

Restore factory settings

APP Configuration (Tuya Smart) ; optional

1. Search “Tuya Smart” in App Store or an App market, and download and install it.
2. Register using your cellphone number and log in.
3. Click “Security &Sensor”, find “Lock(Bluetooth)”, click and add a device following instructions before use.
4. Remote unlocking: wake up the screen and press “9”+”#”. There will be a voice prompt: requesting remote unlocking.

Add a network

1. Press“*”+“#”to authenticate administrator identity and then press “1” to access administrator settings. Then
   there will be a voice prompt of pressing “3” for network configuration.

2. Voice prompt in network configuration mode: press “1” for hotspot connection and “2” for intelligent connection.

   • Hotspot connection mode b) Intelligent connection mode

3. When the network is successfully added, the 1st, 2nd, 3rd and 4th lights on the keyboard will be on in order with a voice prompt of “operation completed”.

4. In the event of network addition failure, the 1st, 2nd, 3rd and 4th lights on the keyboard will not be on and there will be a voice prompt of “operation failed” upon timeout

Other notes

1. Input the wrong password more than 5 times in a row, the keyboard lock for 30 seconds, it does not respond to any operating system in 30 seconds.
2. Password peeping prevention function: input password as follows when opening the door with password: XXX password XXX; you can add some extraneous codes before and after the password, and then press “#” to confirm. The password must be included in the input contents.
3. If there is no operation more than 10 seconds , system will automatically exit.
4. After the voltage is lower than 4.8v, the lock will automatically alarm every time when it is opened. After the alarm, the lock can be opened for 200 times. After the number of times exceeds, each unlock delay is 5 seconds, new batteries must be replaced before the number of times available.
5. When normal open mode is off, press “5#” successively, and the voice says “please enter unlock information”. After entering the unlock information, the voice says “normal open mode, please pay attention to locking”.
6. When normal open mode is on, press “5# successively, and the voice says “normal open mode closed”.
7. Back locking function: After pressing back locking key, the voice says “the door is locked”. Now, ordinary users cannot open it, and only administrators can do so.

Technical Parameters

FC STATEMNT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>