Meade Instruments 5×24 Viewfinder Astronomical Telescope Optical Instructions
- June 10, 2024
- Meade Instruments
Table of Contents
Meade Instruments 5×24 Viewfinder Astronomical Telescope Optical
Instructions
Your telescope includes a 5×24 viewfinder to help locate objects in the night sky. Because of its low magnification and wide field of view, it is much easier to first locate and center an object in the finder scope before subsequent viewing through the main telescope.
Installation
Place the bottom of the viewfinder bracket over the threaded rods on the telescope’s optical tube. Then, use the two included attachment nuts and thread them over the rods into place.
Aligning Your Viewfinder
The finder scope has a wide field of view to facilitate the location of objects for subsequent viewing through the main telescope, which has a much narrower field of view. The finder scope and the main telescope must be aligned so they point to exactly the same spot in the sky. (Note that when you look through the viewfinder, you will see a crosshair with images that will be upside-down. This is normal.)
Looking at or near the Sun will cause irreversable damage to your eye. Do not
point your telescope or viewfinder at or near the Sun.
Alignment is easiest to do in daylight hours. First, insert an eyepiece into
the main telescope and point the telescope at an object such as the top of a
telephone pole or a street sign that is at least a quarter mile away. Move the
telescope so the target object appears in the very center of the field of view
when you look into the eyepiece. Now, without moving the telescope, look
through the eyepiece in your viewfinder. Is the object centered in the field
of view, i.e., on the crosshairs? If not, hopefully it will be visible
somewhere in the field of view. Adjust the three alignment thumbscrews to
center it on the crosshairs. It is often easier to tighten one alignment screw
while simultaneously loosening another. This will keep the viewfinder tight in
its holder. Once the object is centered, you do not need to realign the
viewfinder unless the telescope is disassembled for transport.
MEADE CONSUMER SOLUTIONS
Please contact us at
customerservice@meade.com
Customer Support Call Center +1 800-626-3233 (U.S.A. Only). Our representatives are available to handle your calls regarding any Meade product 8:00am to 3:00pm Pacific Standard Time, Monday through Friday, excluding holidays.
Meade Instruments
89 Hangar Way
Watsonville, CA 95076 U.S.A.
MEADE LIMITED WARRANTY
The Meade Instruments Statement of Limited Warranty is published at: www.meade.com/supports/warranty/
A printed copy of the Meade Statement of Limited Warranty will be made available by Meade upon written request. See below for Meade contact information.
Warranty Claim
Meade Instruments
89 Hangar Way
Watsonville, CA 95076
+1 800-626-3233
customerservice@meade.com
SUBJECT: Warranty Claim
REGISTER YOUR MEADE PRODUCT
Register your Meade telescope with Meade Instruments to receive updates and
other important information related to your product.
Visit the URL below to register your product: www.meade.com/product- registration
Or scan the QR code to access the product registration page:
89 Hangar Way
Watsonville, CA 95076
1-800-626-3233
www.meade.com
©2022 Meade Instruments. All rights reserved. Specifications subject to change without notice.
References
- Meade Instruments Telescopes, Solar Telescopes, Binoculars, Spotting Scopes
- Warranty Information | Meade Instruments
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>