RYOBI RSDP4 Cordless Drills and Screwdrivers User Manual
- June 10, 2024
- RYOBI
Table of Contents
RYOBI RSDP4 Cordless Drills and Screwdrivers
Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating the product
Subject to technical modification
Safety, performance, and dependability have been given top priority in the design of your screwdriver.
INTENDED USE
The screwdriver is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions.
The product is intended for fastening and removing screws and bolts.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the product for
operations diff erent from intended could result in a hazardous situation.
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future reference.
SCREWDRIVER SAFETY WARNINGS
- Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
- Do not switch on the product again after it has stalled. Switching it on again, can cause a kickback with high reaction force. Determine why the product has stalled and rectify it, paying heed to the safety instructions. Ifnecessary, remove the insertion tool.
- Ambient temperature range for tool during operation is between 0°C and 40°C.
- Ambient temperature range for tool storage is between 0°C and 40°C.
- The recommended ambient temperature range for the charging system during charging is between 10°C and 38°C.
ADDITIONAL SAFETY WARNINGS
- Clamp workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.
- Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, ensure you take regular breaks.
- Ambient temperature range for tool during operation is between 0˚C and 40˚C.
- Ambient temperature range for tool storage is between 0˚C and 40˚C.
- The recommended ambient temperature range for the charging system during charging is between 10˚C and 38˚C.
ADDITIONAL BATTERY SAFETY WARNINGS
- To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleachcontaining products, etc., can cause a short circuit.
- Charge the battery pack in a location where the ambient temperature is between 10°C and 38°C.
- Store the battery pack in a location where the ambient temperature is between 0°C and 40°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and
regulations.
Follow all special requirements on packaging and labelling when transporting
batteries by a third party. Ensure that no batteries can come in contact with
other batteries or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check with the forwarding
company for further advice.
KNOW YOUR PRODUCT
- Direction of rotation selector
- Pivot locking button
- Collet
- LED light
- Bit storage
- Handle, insulated gripping surface
- On/off switch trigger
- Slotted bit
- Cross slotted bit
- LED indicator
- Battery cap
- USB cable
- Battery pack
- USB-C port
- Operator’s manual
- USB power adaptor
MAINTENANCE
- The product should never be connected to a power supply when assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product from the power supply will prevent accidental starting that could cause serious injury.
- When servicing, use only original manufacturer’s replacement parts, accessories and attachments. Use of any other parts may create a hazard or cause product damage.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
- Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
- For greater safety and reliability, all repairs should be performed by an authorised service centre.
SYMBOLS ON THE PRODUCT
| No-load speed
---|---
V
| Volts
| Direct current
min-1
| Revolutions or reciprocations per minute
| British Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
| Please read the
instructions carefully before starting the product.
| Do not dispose of waste batteries, waste electrical and electronic equipment
as unsorted municipal waste. Waste batteries and waste electrical and
electronic equipment must be collected separately. Waste batteries, waste
accumulators, and light sources have to be removed from the equipment. Check
with your local authority or retailer for recycling advice and collection
point. According to local regulations, retailers may have an obligation to
take back waste batteries and waste electrical and electronic equipment free
of charge. Your contribution to the reuse and recycling of waste batteries and
waste electrical and electronic equipment helps to reduce the demand of raw
materials. Waste batteries, in particular containing lithium, and waste
electrical and electronic equipment contain valuable and recyclable materials,
which can adversely impact the environment and the human health if not
disposed of in an environmentally compatible manner. Delete personal data from
waste equipment, if any
SYMBOLS IN THIS MANUAL
| Safety alert
---|---
| Note
| Parts or accessories sold separately
| Unlock
| Lock
| Off
| On
| Without force
| With force
| Stop the product.
| Waiting time
| Solid green – Charged
| Solid red – Low battery
(0-25%)
| Flashing red (3 flashes) – Low battery (0%)
| Flashing red (6 flashes) – Overload protection
| Flashing red (9 flashes) – High temperature protection
OPERATING INSTRUCTIONS
Product Specifications
4V Screwdriver
Model
Voltage
Chuck
Switch
Single speed
No-load speed
Torque
Weight (according to epta-procedure 01/2014)
Battery
Battery model
Voltage
Battery type
Lithium-ion
Battery capacity
Number of cell
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN
62841
Impact tightening of fasteners of the maximum capacity of the tool
Uncertainty K
WARNING
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may significantly increase the exposure levels over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organising work patterns.
RYOBI WARRANTY APPLICATION CONDITIONS
In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.
-
The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
-
There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newlyacquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
-
The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
– any damage to the product that is the result of improper or lack of maintenance
– any product that has been altered or modified
– any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
– any damage caused by non-observance of the instruction manual
– any product not displaying the CE approval mark on the rating plate
– any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
– any product connected to improper power supply (amps, voltage, frequency)
– any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
– normal wear and tear spare parts
– inappropriate use, overloading of the tool
– use of non-approved accessories or parts
– Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
– Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc. -
For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
-
A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
-
This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.
AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.
EC DECLARATION OF CONFORMITY
4V Screwdriver
Brand: RYOBI | Manufacturer1 | Model number2 | Serial number range3
We declare as the manufacturer under our sole responsibility that the product
mentioned below fulfills all the relevant provisions of the following European
Directives, European Regulations and harmonised standards4 Authorised to
compile the technical file:
1 Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
2 RSDP4
3 48650901000001 – 48650901999999
4 2006/42/EC, 2014/30/EU, 2011/65/EU
EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN 62841-1:2015+A11:2022,
EN 62841-2-2:2014, EN IEC 61000-3-2:2019+A1:2021,
EN 61000-3-3:2013+A1:2019, EN IEC 63000:2018
Todd Chipner
Vice President, Quality – Asia
Winnenden, Nov. 30, 2022
5 Alexander Krug, Managing Director
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
GB-DECLARATION OF CONFORMITY
Manufacturer: Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
We declare as the manufacturer under our sole responsibility that the product
mentioned below
4V screwdriver
Brand: RYOBI
Model number: RSDP4
Serial number range: 48650901000001 – 48650901999999
fulfills all the relevant provisions of the following Regulations: S.I.
2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as
amended) and that the following designated standards have been used:
BS EN IEC 55014-1:2021, BS EN IEC 55014-2:2021,
BS EN 62841-1:2015+A11:2022, BS EN 62841-2-2:2014,
BS EN IEC 61000-3-2:2019+A1:2021, BS EN 61000-3-3:2013+A1:2019,
BS EN IEC 63000:2018
Todd Chipner
Vice President, Quality – Asia
Winnenden, Nov. 30, 2022
Authorised to compile the technical file:
Techtronic Industries (UK) Ltd
Parkway
Marlow Bucks SL7 1YL
UK
RYOBI is a trade mark of Ryobi Limited, and is used under license
References
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- Ryobi Tools
- Ryobi Tools
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>