AVMAGIC A6 Bluetooth Headphone User Manual

June 10, 2024
AVMAGIC

AVMAGIC A6 Bluetooth Headphone

A6 Bluetooth Headphone

INTRODUCTION OF FUNCTION

CHARGING CASE

❶ Power indicator light
❷ Charge indicator light
❸ Magnetic charging interface
❹ Function key

❺ Interface of charging case

HEADPHONE

L: Left headphone
R: Right headphone

❻ Speaker
❼ Magnetic charging interface
Introduction Of Function
❽ Smart Touch key
❾ Rope hole
Introduction Of Function

USE TECHNIQUE OF LANYARD HOLE

  1. DTwistand unfasten the chain.
  2. Pinch the rope ring through the headphone lanyard hole.
  3. And then pass the other end through the loop and pull it tight.
  4. Rotateandtightenthechain.

A6 FUNCTION OPERATION STATUS

INSTRUCTIONS OF POWER ON/OFF

Operation| Method| Sound| Indicator light

Power on

| Turns on when removed from charging case| Tone| White light is on for 1s
Outside the case and not in use for a long time, need to press the headphone for 3s to turn on| Tone|

White light is on for 1s

Power off

| Automatically charge when enter the charging case| Tone| White light is always on, and the light goes out after it is fully charged
Automatically turn off if not connected within 5 minutes| Tone|

White light is on for 1s

PAIRING INSTRUCTIONS

Operation

| Method| Sound| Indicator light
Pairing| Automatically enter pairing mode after taking out the charging case| |

Light of right head- phone flashes slowly, the left one goes out

Connection

| Turn on the Phone Bluetooth and search for 11A611   to  connect| Tone| \
Disconnect| Headphone will re-enter the pairing mode after disconnecting|

\

|

Light of right head- phone flashes slowly, the left one goes out

Over-distance disconnection

| The phone will disconnect from the headphone when Over-distance| Dong Dong Dong| \
Over-distance reconnection| Return to the wireless range within 5 minutes will connect back automatically| Tone|

\

HEADPHONE UI

Function| Operation method| Sound| Indicator light

Answer the Phone

| Click Right/Left Headphone| | \
Hang up the phone| Click Right/Left Headphone| |

\

Reject Calls

| Long press right/left Headphone for 2s| Tone| \
Voice assistant| Three-click right/left Headphone| Ding|

\

Music play/pause

| Click Right/Left Headphone| Ding| \
Volume down| Long press the left Headphone to keep the volume down| |

\

Volume up

| Long press the right Headphone to keep the volume up| Maximum volume “du”| \
Last song| Double-click the left Headphone| Ding|

\

Next song

| Double-click the right Headphone| Ding| \
Game mode| Four-click right/left Headphone in non-call status| “Game mode on”|

\

| | “Game mode off”|

\

Low voltage alarm

| Battery voltage < 3.6V| Tone| \
Low voltage shutdown| Battery voltage< 3.1V| Tone|

White light is on for 1s

Charging status

| Put back the charging case for automatic charging| | White light is always on
Full power| Headphone battery fully charged| |

White light goes out

CHARGING CASE UI

Status| Instructions
Factory settings| Press the 4 Function key for 8 seconds, and the white light of the

headphone will flash for 3 times, then factory settings will be restored.

Display Power| Open the charging case and click the **4**  Function key to display the

current remaining power for 5 seconds.

Charging| Red light is always on
Full power| Green light is always on
Power display| 4 white lights on indicate 100% power (1 white light indicates 25% power)
Power supply| White light first display the power then display charging status of headphone. (The first white light indicates the left headphone, the fourth one indicates the right headphone)
Low battery alarm| When the battery voltage is lower than 3.3V, 4 white lights will flash 5 times
Stop discharge| When the battery voltage is lower than 3.0v , the charging case starts prot ection,wit hout indicator light and stop discharging
NTC protection| The charging environment temperature is -5°C to 60°C ; 4 white lights flash
Short circuit prompt| 4 white lights flash 10 times; switch the cover or charge to activate after short circuit

Notes: Automatically reconnect to the last connected device after the headphone is turned on. If there is no successful connection within 1 Os, it will enter the pairing mode, the white light will flash slowly (right headphone), and the light on left headphone will be off .

A6 APPLICATION ENVIRMENT

  1. Please avoid using and storing headphones outside the temperature range of -5C ∼ 45C to prevent failure and damage .
  2. Do not expose headphone to the fire to prevent explosion
  3. Do not use headphone to touch sharp object to avoid damage
  4. Do not disassemble the headphone without guidance
  5. Please Keep the headphone in a dry environment.
  6. Charge the equipment regularly for long-term storage.

A6 PRODUCT PARAMETERS

Bluetooth pairing name A6 Music time 6.5 hours
Bluetooth version Bluetooth 5.2 Call time 5 hours (maximum volume)
Bluetooth distance 12 meters Headphone battery type Polymer Battery
Net weight 12.4g (Single), 103.3g (Charging case) Headphone battery
capacity 100 mAh
Snr 90DB Headphone charging time 1.5 hours
Rated Power 50MW Battery capacity of case 750 mAh
Maximum power 60MW Power supply time (Charging case) 2h and 10 minutes
Frequency response range 20HZ-20KHz Charging time of case 13 hours
Impedance 22 OHM±15% Charging mode of case DC 5V / Type-C
Headphone distortion <1% Music playing current 13±2MA
Sensitivity -42dB±4db Call current 15mA
Bluetooth chip qcc3040 Supported protocols HFP/A2DP/AVRCP
Box Size 89.542155 mm Gross weight 250g

Note : The data are the result of testing in a standerd laboatory envirment please reter to the actual use.

A6 WARRANTY CARD

WARRANTY CARD

Please attach a copy of the receipt to the back of the warranty card to prove the date of purchase.
Please use the process if you find fault with the product, please contact our after- sales service.
Please make sure to fill in the warranty card clearly the product faults, problems, etc., so that we can timely deal with you.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals