NEC MultiSync E224F LCD 22 Inch Enterprise Display User Guide
- June 10, 2024
- NEC
Table of Contents
NEC MultiSync E224F LCD 22 Inch Enterprise Display
Product Information
The product is an LCD color monitor available in three different models: E224F /E224F-BK, E244F/E244F-BK, E274F/E274F-BK. The monitor is available in different power supply voltages depending on the country where it is purchased. It has a resolution of 1920 x 1080 pixels at 60Hz and comes with a DisplayPort cable, power cord, and quick start guide. The product can only be serviced in the country where it was purchased, and it is recommended to save the original box and packing material for transportation or shipping purposes. The user manual contains important safety precautions and maintenance information, as well as troubleshooting tips.
Product Usage Instructions
- Before starting monitor assembly, ensure that all contents are in the box.
- Identify the type and number of power cords included based on the country where the LCD monitor will be shipped.
- Follow the instructions provided in the quick start guide to assemble the monitor, using the screws provided.
- Connect the power cord to the monitor and plug it into an electrical outlet.
- Connect the DisplayPort, D-SUB, HDMI, and audio cables to their respective ports on the monitor.
- If desired, install the flexible arm using the instructions provided in the manual.
Refer to the troubleshooting section of the manual if any issues arise during setup or usage of the monitor.
Please use this power cord under 125 V power supply.
https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml
[Global website] https://www.sharp-nec-
displays.com/dl/en/dp_manual/index.html
Registration Information
NEC is a registered trademark of NEC Corporation. DisplayPort™ and the
DisplayPort™ logo are trademarks owned by the Video Electronics Standards
Association (VESA®) in the United States and other countries. MultiSync® is a
trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in
Japan and other countries. The terms HDMI, HDMI High-Definition Multimedia
Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. All other brands and product
names are trademarks or registered trademarks of their respective owners.
Contents
Quick Start
Flexible Arm Installation
NOTE: This product can only be serviced in the country where it was purchased. Remember to save your original box and packing material to transport or ship the monitor. Type and number of power cords included will depend on the country where the LCD monitor is to be shipped. Make sure all contents are in the box before starting monitor assembly.
- The contents of this manual may not be reprinted in part or whole without permission.
- The contents of this manual are subject to change without notice.
- Great care has been taken in the preparation of this manual; however, should you notice any questionable points, errors or omissions, please contact us.
- The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern.
- Notwithstanding articles (3) and (4), we will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
- This manual is commonly provided to all regions so they may contain descriptions that are pertinent for other countries.
Important Information
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING
THE LCD COLOR MONITOR:
About the Symbols
To ensure safe and proper use of the product, this manual uses a number of
symbols to prevent injury to you and others as well as damage to property. The
symbols and their meanings are described below. Be sure to understand them
thoroughly before reading this manual.
WARNING Failing to heed this symbol and handling the product incorrectly could result in accidents leading to major injury or death.
CAUTION Failing to heed this symbol and handling the product incorrectly could result in personal injury or damage to surrounding property
Examples of symbols
Troubleshooting
No picture
- Make sure the signal cable is fully connected to the monitor and the computer.
- Make sure the computer’s display card is fully seated in its slot.
- Make sure there is no DisplayPort converter adapter connected. The monitor does not support DisplayPort converter adapter.
- Make sure both the computer and monitor are powered on.
- The monitor may be in power saving mode. The monitor automatically goes into standby at the preset time period after the video signal is lost.
- Make sure that a supported resolution has been selected on the display card or system being used. If in doubt, please refer to the user’s manual of the display controller or system to change the resolution.
- Check the monitor and your display card with respect to compatibility and recommended signal timings.
- Check the signal cable connector for bent or pushed-in pins.
- Make sure the connected device outputs a signal to the monitor.
Service & Support in Europe
Please contact:
Sharp NEC Display Solutions Europe GmbH. Landshuter Allee 12-14, D-80637
München
- Phone : + 49 (0) 89/99699-0
- Fax : + 49 (0) 89/99699-500
For the latest information please see https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml Data is subject to change without notice.
References
- User's Manual : Display | Sharp NEC Display Solutions
- Sharp NEC Display Solutions Europe - Sharp NEC Display Solutions
- Главная страница - Sharp NEC Display Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>