HUNSN IPC-IM10 Series Qaud Core J4125 Processor Based Fanless Industrial Computer Owner’s Manual
- June 10, 2024
- HUNSN
Table of Contents
IPC-IM10 Series Qaud Core J4125 Processor
Based Fanless Industrial Computer
Owner’s Manual
VGA HDMI/2X Nics/2X COM
Specifications:
| Processor | CPU | Inter Celeron® J4125 |
|---|---|---|
| Chipset | SOC | |
| BIOS | AMI EFI 64M bit | |
| Memory | Type | DDR4 |
| Socket | SO-DIMM | |
| Channel | 1 | |
| Max Size | 8GB | |
| Graphics | GPU | Intel® UHD Graphics 600 |
| Display | 1 x VGA |
1 x HDMI
Network| Controller| 2 x RTL 8168/8111/8112 Gigabit
Interface| 2 x RJ45
I/O| USB| 2 x USB3.0, 2 x USB2.0
Audio| 1 x MIC-IN, 1 x ADUIO-OUT
Wireless| Wireless / BT| 1 x AC 3165 VViFi/BT
Storage| Socket 1| 1 x mSATA SSD
Socket 2| 1 x 2.5″ SATA 6 Gb/s SSD/HDD
Auto Power On| BIOS Setting
Operation System| Windows| Windows 10 Pro (64-bit)
Linux| Support
Power| Power Type| DC-IN
Power Adapter| 12V3A
Mechanical| Dimensions| 170 x 125 x 50mm
Construction| Aluminum
Environment| Operating Temperature| 0°C-70°C Centigrade (32°F-140°F)
Relative Humidity| 10%-90% (non-condensing)
Certification| | CE, FCC, Rohs
Key Features:
- Intel® Celeron® Quad Core J4125 BGA Processor and Intel® SOC Chipset
- Rich I/O: 2 x LAN, 2 x COM (RS232), VGA, HDMI, 2 x USB 3.0, 2 x USB2.0, Audio
- Single SODIMM for up to 8GB DDR4 Memory
- Rich Storage: mSATA SSD, 2.5 Inch SSD/HDD
- Embedded Expansion: Mini PCIe for WiFi
Figure:
Ordering Information:
| Model | CPU |
|---|---|
| IM10-J4125 | Intel® Celeron® Processor J4125 |
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
HUNSN reserves the right of final interpretation for the content hereinabove.
Documents / Resources
|
HUNSN IPC-IM10 Series Qaud Core J4125 Processor Based Fanless Industrial
Computer
[pdf] Owner's Manual
IM10-J4125, IPC-IM10 Series Qaud Core J4125 Processor Based Fanless Industrial
Computer, Qaud Core J4125 Processor Based Fanless Industrial Computer,
Processor Based Fanless Industrial Computer, Fanless Industrial Computer
---|---