eezo CT21 Wi-Fi Bullet Camera User Guide

Table of Contents

The pattern of the LED indicator is included in the following table.

Voice control works with Alexa or Google Assistant

You can control your camera using just your voice with Alexa or Google Assistant-enabled devices.

Step 1
Scan the following QR code or search “eezo” in Google Play or App Store to download and install the app.
Note: If you have installed the app, update it to the latest version.
Step 2
Run eezo App, and then register an account for the first use.
Step 3
Connect the camera to power source with the power adapter.
Step 4
Wait for booting to be finished, and then the camera indicator flashes with green light.
Step 5
Do the following operations to finish adding camera.

This manual is for reference only. The operation of the actual product shall prevail if there is any inconsistency.
All the designs and software are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their respective owners.
Please visit our website or contact customer service if there is any problem when using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.

Note:

If you have more than one camera, do step 5 to add them one by one.
If the Wi-Fi network has changed or the indicator status goes wrong, reset the camera, and then do step 5 to add it again.

Note: Make sure that the mounting surface is strong enough to hold at least three times of the device weight.

Step 1 Drill screw holes on the mounting surface as the positioning map shows, and then put in the expansion bolts.
Step 2 Attach the pedestal to the mounting surface with the self-tapping screws.
Step 3 Power up the camera, and then adjust the lens to the ideal angle.

Q: The device cannot boot up or work as expected?
Check the LED indicator status. If the light is not in green, press and hold the reset button for 10s to reset the camera.
Q: How to connect the camera to another Wi-Fi network?
- If the camera is online, select camera> settings›Device Setting> WLAN>Network Config to change the Wi-Fi connection on the app.
- If the camera is offline, reset the camera, and then configure the camera again.
Q: Connection takes too long?
- Check if the distance between the camera and the router, and that between the camera and the smart phone is both within 5 m (16.4 ft) during the connection.
- Check the Wi-Fi configuration of the router: Select the channel to auto, and the mode to 11bgn mixed.
Q: When the micro SD card is full, how is the recorded video saved?
When the micro SD card is full, the system will overwrite the previous recorded videos. Save the important information in time.