LUCIDE SEGIN Wall Light Instruction Manual
- June 10, 2024
- LUCIDE
Table of Contents
SEGIN Wall Light
Instruction Manual
SEGIN Wall Light
INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminates your world
DISCOVER OUR COLLECTION!https://qrcodes.pro/ctf05b
Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?
https://qrcodes.pro/PEN8Q4
Our brand video gives you a glimpse behind the scenes at Lucide
#ILLUMINATES YOUR WORLD
https://qrcodes.pro/mJ5x94
Take a look at how others around the world use Lucide products
Follow us for the latest lighting trends!
SEGIN Item number: 12200/90/30
EAN code: 5411212126917
General
- Dimensions LxWxH: 90cm x 4cm x 22cm
- Main material: Aluminum
- Ceiling rose material: Aluminum
- Color: Black
- Style: Modern
- Shape: Rectangle
- Weight: 0,39kg
Specifications
- Dimmable: No
- Light direction: Anders
- Adjustable in height: Not In Height Adjustable
- Directional: Not Directional
- Cable: No Cable On Product
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: Integrated LED
- Maximum wattage: 10W
- Power requirements: 220-240V~50Hz
- Lumen: 330Lm
- Colour temperature: 2700K
- Beam angle (if directional): 120°
- Color Rendering Index: 80
- Warranty: 3 Years
For more specifications of this product please visit www.lucide.com
TECHNICAL DRAWING & DIMENSIONS
Item number: 12200/90/30
EAN code: 5411212126917
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installation, please see further).
Indoor items cannot be used in humid places. Do not put the item in contact
with water or any liquids or inflammable products. Always respect the minimal
distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician. This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
| This item is only suitable for indoor use, exclusive bathroom (except if a
higher IP degree permits that the item can be used in the bathroom).
---|---
| Legislation requires that all electrical and electronic equipment must
be collected for reuse and recycling. Electrical and electronic equipment
marked with this symbol indicating separate collection of such equipment must
be returned to a municipal waste collection point.
| Class I: The item has an earth connection. The earth wire (green-
yellow) needs to be connected to the earth connection (marked with this
symbol).
| Class II: The item is double insulated and must not be connected to the
earth wire.
| Class III: The item is only suitable for lower voltage supply and must not
be connected to the earth wire.
| IP 20: Protection against contact with a finger
| If the protection glass is damaged or broken, it needs to be replaced
immediately.
| Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration:
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 3 years from the date of purchase by
the end user, if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, discoloring as a result from normal use.
- Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product.
For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.
Further explanations can be found on our website.
www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN
145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>