Tronsmart Force Pro Bluetooth Speaker User Manual

Tronsmart Force Pro Bluetooth Speaker

Product Information

This product is a speaker that can be turned on and off by holding down the power button for 3 seconds. It also has a voice assistant feature that can be activated by holding down the button for 1 second after pairing the device with the speaker. Additionally, there is a hard reset function that can be initiated by holding down the power button for 8 seconds.

Product Usage Instructions

1. To turn on the speaker, hold down the power button for 3 seconds.
2. To turn off the speaker, hold down the power button for 3 seconds.
3. After pairing your device with the speaker, you can activate the voice assistant by holding down the power button for 1 second.
4. If you need to perform a hard reset, hold down the power button for 8 seconds.

Thank you for purchasing the Tronsmart Force Pro Bluetooth Speaker. Please read the user manual before use and keep it handy for future reference. If you have any additional questions or comments, please contact us by email at: support@tronsmart.com

PACKAGE CONTENTS

• 1 x Force Pro Bluetooth speaker
• 1 x Aux-in cable
• 1 x Type-C charging cable
• 1 x Warranty card
• 1 x User manual
• 1 x Storage bag
• 1 x Lanyard

BUTTON CONFIGURATION

1. NFC
2. Music playing mode; Connect/Disconnect Bluetooth; Reset
3. Volume+; Next track
4. Play/Pause; Answer/End a phone call;
5. Volume -; Previous track
6. Broadcast mode
7. Power ON/OFF; Voice assistant
8. Indicator light (Bluetooth/Broadcast mode/ Charging)
9. Aux-in port
10. TF/Micro SD card slot
11. USB-A port (power bank function)
12. Type-C charging port

SPECIFICATIONS

TF/Micro SD card, power bank

Dimension| 240±1mm110±1mm70±1mm
Weight| 1340g±10g /47.22oz

1. Turn ON/OFF

2. Bluetooth Connection & Disconnect

   • Turn on the speaker and your device’s Bluetooth settings, search for ‘Tronsmart Force Pro’ then tap to connect. The blue indicator light will be always on when the pairing is completed.
   • Hold the ‘M’ button for 3 seconds to disconnect or connect Bluetooth.

3. Connect Broadcast mode

   • Connect the host speaker with your phone.

   • Press and hold the Bluetooth button of the host speaker and when it beeps twice, it will disconnect your phone and then enter the broadcast mode.

   • Turn on another speaker, press and hold the Bluetooth button after it beeps twice, it will enter the broadcast mode.

   • And a beeping will be heard when the host speaker connects with the other successfully.
     NOTE

   • Only the host speaker could control the function of the vice speaker. The vice speaker could not be able to control the host speaker.

   • The vice speaker will automatically quit the broadcast mode and search for Bluetooth pairing if it cannot be connected with the host speaker within 60 seconds; *The host speaker does not have the function of auto quit.

   • The aptX HD is not available under broadcast mode.

   • When you turn off the broadcast mode, you need to reopen the Bluetooth settings page to select aptX HD again.

   • After restarting the speaker, you need to re-enter the broadcast mode to pair, and it will not automatically connect to the previously connected devices.

   • The synchronous power-off function is not available.

4. Disconnect broadcast mode
   Tap the ‘ broadcast mode ‘ button to disconnect from other speakers.

5. EQ function switch
   Only available on the App.

6. NFC Streaming
   Confirm Bluetooth & NFC functions are enabled on your device, and then put the device on the NFC area of the speaker to pair automatical­ly. If you need to disconnect NFC streaming, put the device back to the area again to disconnect.

7. USB-A Power Bank Function
   This speaker carries a USB charge-out function that will automatically detect your device and begin to charge it when the charging cable is plugged into the USB-A port. The output power is up to DC SV/1 A. In order to maintain a stable music-playing performance, it’s not recommended to use the music and power bank function at the same time.

8. Aux-in Mode
   Simply connect the speaker to your non-Bluetooth device via the 3.5 mm audio jack cable.
   Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.

9. TF/Micro SD Card Slot Mode
   The speaker will play the music from your TF/Micro SD card when plugging the card into the slot. The maximum supported memory is 32 GB.

10. Charging

11. Auto Power Off
    The speaker will power off automatically after 1 hour if it does not pair with any device through Bluetooth or does not play any sound after pairing. When in low battery, the speaker will power off automatically as well.

12. Reset:
    Hold for 8 seconds to shut it down forcedly in case of the speaker is abnormal or crashes.

13. Reset to Factory Default Settings
    Hold the ‘M’ button for 8 seconds until a sound prompt is heard, which means that the speaker has been reset to factory default settings.

Care & Maintenance

Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable. Do not disassemble this product. It contains no user-serviceable parts. Do not drop or jump on it and treat it with care for the best performance. Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept in an unfriendly place. Do not dispose of this product in a fire or the batteries may explode or leak.

Warranty Information

Your ‘Tronsmart Force Pro Bluetooth Speaker’, is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd., LongGang District, Shenzhen, China
Emall: support@tronsmart.com.
800-270-1082 (USA& Canada)
+86-755-23603740 (Global).
www.tronsmart.com
FCC ID: 2AV3Z-MEGAPRO

Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>