Thomann OTAMATONE Classic Synthesiser Instruction Manual

June 11, 2024
Thomann

Thomann OTAMATONE Classic Synthesiser Instruction Manual

Thomann OTAMATONE Classic Synthesiser Instruction
Manual

Step 1 – Set up the Otamatone for playing.

How to change batteries:

Required batteries: AAA x 3

  • Test batteries included.
  • Alkaline batteries are recommended

Thomann OTAMATONE Classic Synthesiser Instruction Manual - How to change
batteries

  1. Open the battery cover with the right size plus (+) screwdriver.

  2. Place new batteries so that the (+) and (-) sides are in the right direction.
    • Turn counterclokwise to open.
    • Turn clockwise to close

  3. Attach the cover as shown and push to close.

  4. Tab Tighten the screw.

AAA Batteries

  • Place three new batteries facing the same way.
  • (+) and (-) sides are indicated inside the box

Change the batteries when the sound is softer and intermittent.
Hint to make the batteries last: Turn the switch off after playing.

Selection of Volume and Octave:

Thomann OTAMATONE Classic Synthesiser Instruction Manual - Selection of
Volume and Octave

Step 2 – Hold the Otamatone

Thomann OTAMATONE Classic Synthesiser Instruction Manual - Hold the
Otamatone

Step 3 – Let`s make some sounds!

Push Technique:
Thomann OTAMATONE Classic Synthesiser Instruction Manual - Push
TechniquePush the Stem Switch anywhere! This will make “mmm” sound. Push different places and the sound will change too.

Hint: Push the Stem Switch with your index finger and thumb

Slide Technique:
Push and hold the Stem Switch. Slide the fingers up and down. This will make “peooow” sound.

Hint: Push a bit harder and slide to make sure the sound does not break. After mastering the technique, you can adjust the pressure.

Change the Octave switch to try a different pitch.

Mouth Technique:
Thomann OTAMATONE Classic Synthesiser Instruction Manual - Mouth
TechniqueWhile pushing the Stem Switch, open and close the mouth. The sound changes from “woo” to “wah.” Repeat this to make “wah wah wah.”

Hint:

This will vary the sound. The opening and the closing of the mouth makes everyone happy!

Step 4 – Try different techniques!

Vibrato:
A tremulous or pulsating effect produced in an instrumental or vocal tone. Vibrate the Stem while doing the Push technique.

Portamento:
A continuous gliding movement from one tone to another. Play songs as you slide your fingers. It sounds like a grass whistle.

Wah-wah:
A musical special effect to produce voice-like tones. Open and close the mouth while pushing the Stem Switch

For more information’s and other Otamatone models, visit the Thomann Website https://www.thomann.de/de/otamatone.html

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals