ECO TECHNOLOGIES ECO-LRW-GWW2-1HK 8-Channel Indoor Gateway User Manual
- June 11, 2024
- ECO TECHNOLOGIES
Table of Contents
ECO-LRW-GWW2-1HK 8-Channel Indoor Gateway
User Manual
Overview
This document helps customers quickly understand the hardware interface, RF,
software, and electrical specifications of ECO-LRW-GWW2-1HK.
1.1 Variety of the Product Series
- Main model: ECO-LRW-GWW2
1.2 Description
The ECO-LRW-GWW2-1HK WisGate Edge Lite 2 (and all its varieties) is a full 8-channel indoor gateway, based on the LoRaWAN protocol, with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup (supporting 2.4G Wi-Fi) that allows it to be easily configured via the default Wi-Fi AP mode. Additionally, the gateway supports LTE cellular connection available.
As with the other ECO wireless Industrial Gateways, it also supports MQTT Bridge mode, with the option for TLS authentication.
Power-over-Ethernet (PoE) is supported to serve cases where wall or ceiling mounting is required without the need to install additional power lines.
The software(WisGate OS/2) for the management and configuration of this gateway device is based on OpenWRT. It has a built-in LoRa packet forwarder and a graphical user interface, allowing for a quick setup without giving up the freedom of a fully customized solution.
ECO-LRW-GWW2-1HK also supports the MQTT Bridge function and can use the MQTT integrated into third-party platforms.
ECO-LRW-GWW2-1HK is especially suitable for small and medium-sized deployment scenarios in industry applications, saving the additional cost for server and R&D investment, and has the advantages of high execution efficiency.
1.3 Product Features
- Full LoRaWAN Stack support in Built-In Server mode
- Supports 2.4 G Wi-Fi AP for configuration
- 100M Base-T Ethernet with PoE
- Multi back-haul with Ethernet and Wi-Fi
- Cellular LTE Cat 4 network (optional, available with C versions)
- BLE connectivity (optional, available with H versions)
- OpenWRT software supports Web UI for easy configuration and monitoring
- Can integrate with both private (e.g. Chirp Stack) and public (e.g. TTN) network servers
- SD card for system logs backup
- Built-in Network Server for easy deployment of applications and integration of gateways
Manufacturers Address
ECO Technologies Limited
Room 2201, 22/F, APEC Plaza, 49 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong
Specifications
2.1 Hardware Interfaces
The hardware interfaces of WisGate Edge Lite 2 gateway include DC 12V, ETH
interface, Console interface, Reset key, TF Card slot, Status indicator LEDs,
LoRa Antenna connector, etc. As shown in the following figure.
-
The function of the Reset key is as follows:
Short press: Restart the Gateway.
Long press (5s and above): Restore Factory Settings. -
The following table shows the LEDs status of ECO-LRW-GWW2-1HK.
| LEDs | Status Indication Description |
|---|---|
| PWR LED | Power indicator – The LED is on when device power is on |
| Breathing LED | Breathing after system up |
| ETH LED | ON – Linkup |
OFF – Link down
Flicker – Data transmitting and receiving
LoRa LED| ON – LoRa is working
OFF – LoRa is not working
Flicker – Indicate LoRa Packet receiving and sending
WLAN LED| AP Mode:
-ON – The AP is up
-OFF – The AP is down
-Flicker – Data receiving and sending
STA Mode:
-Slow flicker (1 Hz) – Disconnected
-ON – Connected
-Flicker – Data receiving and sending
LTE LED (functional only in C models)| Slow Flicker (1800 ms High / 200 ms
Low) – Network searching
Slow flicker (200 ms High / 1800 ms Low) – Idle
Fast flicker (125 ms High / 125 ms Low) – Ongoing data transfer
2.2 Main Specifications
| Feature | Specifications |
|---|---|
| Power supply | DC 12 V – 1 A |
Wi-Fi feature
Power consumption
ETH
Console| PoE (IEEE 802.3 af), 36~57 VDC
12 W (typical)
RJ45 (10/100 M)
Type-C USB
Cellular (optional, available with C models)
Ingress protection Enclosure material Weight| Breathing LED (Top side)
ETH LED (On ETH connector)
LoRa LED
WLAN LED
LTE LED (functional only in C models)
IP30
Plastic
0.3 kg
Dimension| 166x127x36 mm
Operating temperature Installation method| -10 to 45˚ C
Wall mounting
2.3 Software Specifications
The following chapters introduce software specifications of ECO-LRW-GWW2-1HK
indoor gateway. It includes LoRa, network and management.
| LoRa | Network | Management |
|---|
• Supports class A, C
• Supports LoRa package forward
– Packet Forwarder
– Basics™ Station
– Built-In Server
• Supports country code setup
• Supports TX power setup
• Supports data logger
• Supports statistic
• Supports location setup
• Supports server address & port setup| • Supports Wi-Fi AP mode
• Supports uplink backup
• Supports 802.1q
• Supports DHCP Server/Client
• Supports router module NAT
• Supports firewall| WISDM remote management platform
Supports WEB management Supports SSH2
Supports firmware update Supports NTP
Supports configuring the LoRa Packet Forwarder
Supports Build-in LoRa Server
Supports OpenVPN, Ping Watch Dog
Supports MQTT Bridge
Configure the Gateway
You can log in to the WEB management page to overview the status of your
gateway and configure it.
By default, the gateway will work in Wi-Fi AP Mode, which means that you can
find an SSID named GWW1_XXXX on your PC’s Wi-Fi Network List. XXXX is the last
two bytes of the gateway’s MAC address.
No password is required to connect via Wi-Fi.
Using your preferred Web browser, access the gateway on the IP address shown
below:
Browser Address: 192.168.230.1
Username: root
Password: root
For WisGate Edge Lite 2 models V2 and H you need to set the login password at
the first login.
Contact Information
Please contact us if you need technical support or want to know more information.
- Support center: http://ecolinkage.com/
- Email: tony<[email protected]>
Certification Information
CE
Operating frequency range:
| Technology | Frequency band [MHz] | Maximum RF output power (dBm) |
|---|---|---|
| LoRa | 863-865, 865-868, 868-868.6, | |
| 868.7-869.2, 869.7-870 | 14 | |
| 869.4-869.65 | 27 | |
| BLE | 2402-2480 | 10 |
| WLAN 802.11 b/g/n | 2400-2483.5 | 20 |
| GSM 900 | 880-915(TX)，925-960(RX) | 33 |
| GSM 1800 | 1710-1785(TX)，1805-1880(RX) | 30 |
| WCDMA Band I | 1920-1980(TX)，2110-2170(RX) | 24 |
| WCDMA Band VIII | 24 | |
| LTE | 880-915(TX)，925-960(RX) | |
| Band 1 | 1920-1980(TX)，2110-2170(RX) | 23 |
| Band 7 | 2500-2570(TX)，2620-2690(RX) | 23 |
| --- | --- | --- |
| Band 8 | 880-915(TX)，925-960(RX) | 23 |
| Band 20 | 832-862(TX)，791-821(RX) | |
| Band 28A |
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
following the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 40 cm between the radiator and any part of your body for
ECO-LRW-GWW2-1HK