QAZQA 105924 Shiny FL Black Wood Tripod Instruction Manual
- June 11, 2024
- QAZQA
Table of Contents
QAZQA 105924 Shiny FL Black Wood Tripod
Shiny FL Black Wood Tripod 105924
For indoar use only. Keep out of the reach of children and animals. Place on flat surface and away from flammable materials. Never operate this appliance if it has a damaged cord, plug or cable. Keep cord away from heated and/or damp areas.
CAUTION
Only use E27 40W bulb or CFL equivalent.
-
Place Lamp in room and adjust left to right. Tighten screw firmly. See inset below.
-
Loosen and pull screw away from channel.
-
Screw in light bulb Plug in electrical cord. Turn switch ON to test Close Grill and tighten.
FittinQ B.V
Smaragdweg 52, 5527 LB Hapert,
The Netherlands www.gazqa.nl
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
For indoor
use only, where direct contact with water is impossible
This icon indicates the level of water-proofand dust-proof
Protection
Class I: the fitting must be earthed
Protection Class II: the fitting is doubled insulated and does not require earthing
Protection
Class III: the fitting is low voltage
Minimum distance from lighted objects (meters) The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons.
The armature
is designed to work only with the indicated voltage. Different items require
different working voltage.
The luminaire can be used in combination with a dimmer .
The reference light angle and light spaceof the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can but son bore to a Staging area. -
Take note of the symbols when connecting wires:
L: Live conductor
Earth conductor
N : metern conductor
FittinQ B.V.
Smaragdweg
52, 5527 LB Hapert, The Netherlands www.gazqa.nl