iFan IF3266 Air Purifier User Manual

June 11, 2024
ifan

iFan IF3266 Air Purifier

IF3266 Air Purifier

PARTS & DESCRIPTION

LIST OF COMPONENTS
  1. Front Cover
  2. Filter
  3. Control Panel
  4. Air Outlet
  5. Air Inlet
  6. Mosquito Catching Function
  7. Power Adaptor

Control Panel

Control Panel

CONTROL PANEL’S BUTTONS AND THEIR FUNCTIONS

Button Function Steps
**** Timer Touch this button whilst in the Standby state to turn on

the timer shutdown function.
The timing is cyclically switched between 2h, 4h and 6h.
**| Power| Touch this button to start or shut down the appliance.
On Start-up, the Ambient Light and Negative Ion Generator are turned on by default.
**
| Wind Speed| Touch this button to adjust the fan speed.


| Mosquito Catching Function| In the Power-on state, press and hold these 2 buttons
(Timer + Wind Speed) at the same time for 3s to turn on/off the Mosquito Catching Function.
**| Ambient LED light**| In the power-on state, press and hold the Timer button for 3s to turn on/off the Ambient LED light.

WARNINGS

ATTENTION :
Read this booklet carefully it contains important instructions for a safe installation, use and maintenance.
Important instructions to be kept for future reference.

The following basic precautions should always be followed when using electrical appliances:

  1. Read all instructions before using the appliance.

  2. This appliance must be used only for the purpose it was expressly designed; any use NOT complying with the instructions contained in the manual is considered inappropriate and dangerous. The manufacturer is NOT responsible for possible
    damages caused by the inappropriate and/or unreasonable use.

  3. This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air). Items containing these substances should never be placed in the appliance, and never be used to clean the appliance in order to avert the risk of fire or explosion.

  4. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger.

  5. The installation/assembly of the appliance will be made in accordance with the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.

  6. Before use, check the integrity of the appliance and power cable. In case you are not sure, contact a qualified person. If the power cable is damaged, it must be replaced by the manufacturer or its service agent or a qualified technician in order to avoid a shock hazard.

  7. Before powering the appliance make sure the rating (voltage and frequency) corresponding to the grid and the socket is suitable for the plug of the appliance, and that the wall socket is properly grounded.

  8. DO NOT power the appliance using multiple sockets. If possible, avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only materials in compliance with the current safety regulations and according to the electrical parameters of the adapters.

  9. The appliance must NOT be switched on using external timers and/or other remote control appliances which are not specified in this manual.

  10. Only use original components & accessories provided by the manufacturer. Any non-original components & accessories NOT recommended by the manufacturer may cause injuries to persons or damage to the appliance.

  11. If you are using the appliance for the first time, you should:
    a. Clean the exterior parts of the appliance thoroughly with warm water &
    detergent with a non-abrasive sponge.
    DO NOT use metal scouring pads.
    b. Check that the Fan Grills and Fan Blade are NOT damaged.
    c Operate the appliance only with the Filter element inserted and the cover closed.
    d. Place and use the appliance on a horizontal, stable and dry surface.
    Damage may occur if the appliance is placed on an incline or decline.
    e. Insert the plug directly into a standard AC socket.
    Be sure that the plug fits tightly into the socket.
    f Press the “Power” button ON. The indicator light turns on.
    g. You can select the desired time for the appliance to be in operation between 0 to
    6 hours if you wish (optional). Press the “Timer” button once for 2 hours, twice for
    4 hours and trice for 6 hours.
    g. Press the “Wind Speed” button for the fan speed (Low – 1, 2, 3 – High) you desire
    on the Control Panel.
    i. To stop the fan, Press the “Power” button OFF
    Make sure to remove any label or protective sheet which may prevent its proper functioning.
    DO NOT:
    • operate the appliance in a room (or location) with high air humidity, such as a bathroom, shower or swimming pool, as moisture can accumulate in the appliance and cause an electric shock;
    cover the appliance during functioning;
    • obstruct totally nor partially the Air Inlet & Outlet;
    • insert objects or body parts inside the protection cover of the appliance;
    • attempt to force the fan blades to turn;
    • push the “Timer”, “Power” or “Wind Speed” buttons too forcefully;
    • use the appliance near curtains or textiles;
    • use any spray in the room;
    • add aromatic oil to the Filter;
    • use any of the following agents as a cleaner: gasoline, thinners, benzene, acidic or abrasive detergents;
    • operate the appliance at temperatures lower than 0°C or higher than 40°C, and operate the appliance for more than 6 hours without turning it off for at least 30 minutes to let the appliance cool down for a total usage of 12 hours a day – failure to heed this warning may result in motor failure; leave the appliance unsupervised during operation.

  12. Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power cable to avoid overheating and avoid stretching it (DO NOT pull it, tug it or use it to drag the appliance to which is connected). Before unplugging the appliance, switch it off, using the proper command on the Control Panel.

  13. During operation, DO NOT touch the appliance with wet body parts, and it is recommended to have between you and the standing surface, an isolating element (for example, wearing shoes with rubber soles).

  14. DO NOT soak the appliance in water or other liquids, wash it under the tap, or let any liquid flow into the internal casing of the appliance to prevent electric shock. In case of accidental fall in water, DO NOT try to take it out, but first of all unplug immediately the power cable from the socket.

  15. DO NOT operate the appliance next to an open window while it is Rainwater splashing onto the appliance may cause an electric shock.

  16. Place the appliance at a proper distance from objects or surrounding walls making sure that its functioning will not cause accidental There should be at least 20 cm of free space from the back, left & right sides, and the top of the appliance.

  17. Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily. The cable must NOT be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from the high traffic area, and where it will NOT be tripped

  18. Always switch “OFF” the appliance by pressing the “Power” button OFF, switching off the electric mains and unplugging the power cable of the appliance if it is NOT used for a long period, before storing, cleaning or performing any maintenance operation.

  19. Avoid carrying out operations which are NOT specified in this manual (such as disassembling and/or altering).

  20. In case of malfunction or anomaly during the functioning, switch off the appliance immediately, turn off the power and check the cause of the anomaly, if possible, with the support of a qualified

  21. DO NOT touch the inside of the appliance while it is operating. The blades are rotating at very high speeds, which may lead to injury to your fingers and

  22. If smoke is observed coming out of the appliance, unplug the power cable

  23. This appliance is NOT intended for commercial use but to be used in households and similar applications, such as:
    •  Staff kitchen areas in shops, offices and other working environments;
    • Dormitories;
    • By clients in hotels, motels and other residential environments;
    • Bed and breakfast type environment

  24. DO NOT use or store the appliance outdoors. Store and use the appliance only indoors, or in any case, protected from weathering such as rain, direct radiation of the sun and

  25. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall NOT play with the appliance. Cleaning and user maintenance shall NOT be made by children unless they are older than 8 and supervised. Keep the appliance and its cable out of reach of children less than 8 years

  26. Save these

HOW TO CLEAN

  1. Filter replacement is calculated by the built-in program, but due to the different pollution levels of the actual application environment, the life cycle of each Filter will be different, and it can be replaced in time according to the sound and smell of the machine.

  2. In households with a large number of smokers, the Filter replacement cycle may be shortened to once in every 6 months. If bad odours are released from the Air Outlet, it means that the Filter’s filtration and adsorption volume is saturated. You should clean it first and if there is no improvement, you should replace the Filter. It is recommended to clean the Filter once every 1 month. If the operating environment is poor, the cleaning frequency should be increased.

  3. When the service life of the Filter has expired, the product emits three beeps “ding”~ “ding”~”ding”~ and the 3 buttons of the Control Panel keep flashing.

  4. Press the Power button on the Control Panel to stop the fan blades from rotating.

  5. Unplug the power cable firmly holding it with dry hands.

  6. Wait for the appliance to cool down completely.

  7. Hold the Front Cover with both hands and lift it up to remove the Front Cover.
    How To Clean

  8. Take out the composite Filter and wrap the waste Filter material in a garbage bag to prevent pollutants on the Filter material from falling into the room.
    Note: The Filter that has reached the replacement cycle cannot be reused even if it is clean. Please dispose of it as non-combustible garbage.

  9. Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet, and also to clean the surface dust on the composite Filter when the surface is dusty, which can extend the service life of the Filter.

  10. Adjust the direction of the new Filter corresponding to the Filter slot on the purifier, and insert the new Filter.

  11. After the Filter is replaced, reset the Filter reminder; press the + at the same time and hold for 3 seconds to reset the Filter life timer.

  12. Clean the exterior parts of the appliance thoroughly with warm water & dish-washing agent and a damp cloth, and immediately wipe dry.
    DO NOT use a scrubbing brush.
    DO NOT use any of the following agents as a cleaner: gasoline, thinners, or benzene.

  13. Never run water over the appliance as malfunctions may occur if water seeps inside the appliance.

  14. Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet.

PROBLEM SOLVING

If your air purifier is not working properly, please check the following before sending it for repairs.

Problem Possible Causes How to Solve
The appliance does not work The plug is not properly inserted in the power
socket Insert the plug into the power socket. Do not use adaptors or

extensions.
The switch at the electric mains is not switched on and/or the ON/OFF Button is not pressed.| Turn the electric mains and/or the ON/OFF Button on.
The motor has overheated.| Disconnect the appliance from the electric mains and leave the motor to cool.
The power cable is defective.| Have the power cable replaced at the authorised Service Centre.
Lack of power.| Check that the house main breaker is on.
Motor or PCBA breakdown| Have the appliance checked at the authorised Service Centre.
Bad odours are released from the Air Outlet of the appliance| The Filter’s filtration and adsorption volume is saturated.| Have the Filter replaced.
The odour concentration of the indoor air is too high| Open nearby windows for ventilation, and check if the bad odour is emanating from the appliance itself.
The purification effect is not significant, and the air quality is not significantly improved| The Filter had not been installed.| Install the Filter.
The machine is tucked within narrow confines or near obstacles that affect the ability of the appliance to draw in air.| Place the appliance on a flat,stable surface or remove the obstacles.
The Filter is too dirty.| Clean or replace the Filter.
The appliance is too noisy| Foreign objects have fallen into the appliance.| Check to see whether there is any blockage, and if so, attempt to remove them.
If the foreign object(s) is wedged too deeply, bring the appliance to the authorised Service Centre.
The appliance has been situated on uneven ground.| Place the appliance on a flat, stable surface.
The parts may have been incorrectly assembled.| Check to see whether the Filter or parts around it had been incorrectly re-positioned during the last replacement or  cleaning.
The Filter is too dirty.| Have the Filter replaced.
The Wind speed set is too high.| Set a lower speed.
The Filter cannot fit into the appliance| The Filter is being installed upside down.| Adjust the correct orientation of the Filter and align it with the bottom slot.

ENVIRONMENTAL TIP

This device, along with all other electronic devices, should, when it is no longer capable of functioning, be disposed with the least possible environmental damage according to the local regulations in your area. In most cases you can discard the device at your local recycling center.

DISPOSAL: Do not dispose this device as unsorted municipal waste. Collection of such waste separately for special treatment is necessary

WARRANTY

The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 1 year, starting from the date on which the appliance is sold to the end user. The warranty covers defects in material and workmanship.
The repairs under warranty may only be carried out by an authorised service centre. When making a claim under the warranty, the original bill of purchase (with purchase date clearly indicated) must be submitted.

The warranty will not apply in cases of:

  • normal wear and tear
  • if the steps (as laid out in the section regarding Warnings) have not been observed e.g. overloading of the appliance, use of non-approved accessories
  • if the appliance has not been properly maintained, if force has been used against it or if it has been damaged in any other way
  • damage caused by non-observance of the user manual or non-compliance with the installation instructions
  • errors or faults owing to defects in the distribution system
  • if the appliance has been repaired or modified or changed in any way or by any person not properly authorised

SPECIFICATION

MODEL

| NEGATIVE ION OUTPUT| VOLTAGE
---|---|---
IF3266| 10×106 pcs/m3|

100-240V

POWER

| CLEAN AIR DELIVERY RATE| COVERAGE A
24W| 200m3 /h|

20m2 to 30m2

CUSTOMER SERVICE

PowerPac Electrical Pte Ltd
sales@powerpac.com.sg  PowerPacSg
www.powerpac.com.sg  @PowerPac4

iFan-Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals