Waring Commercial WWB10G Hot Water Dispenser User Manual
- June 11, 2024
- WARING COMMERCIAL
Table of Contents
Waring Commercial WWB10G Hot Water Dispenser
Product Information
- Product Name: 10 Gallon Hot Water Dispenser
- Catalog/Model: WWB10G
- Adjustable legs
Product Usage Instructions
- Connect the cord set to the unit and power source
- Adjust the legs to the desired height
- Fill the dispenser with water using either the auto-fill or manual method
- Turn on the unit using the START button
- To conserve energy, activate NIGHT MODE when not in use
- Use the HOT WATER tap (spigot) to dispense hot water as needed.
Note: Refer to the user manual for additional information and maintenance instructions.
Unit Information
- 15 Amps – 1800 Watts – 120 Volts
- Temperature range from 150˚F – 205˚F (66˚C – 96˚C)
- View temperature in Fahrenheit or Celsius
- Legs are adjustable.
PARTS
Illustration# Part# Description
- 037140 Lid
- 037141 Lid Seal (on unit)
- 037142 8.75″ Burgundy Lead (round and regular terminal)
- 037142 8.75″ BurgundyLead (round and regular terminal)
- 037143 8.75″ Green/Yellow Lead (2 round terminals)
- 037144 12.5″ BurgundyLead (2 round terminals)
- 037145 12.5 Red Lead (round and regular terminal)
- 037146 16.5″ Blue Lead ( 2 round terminals)
- 037147 8.625″ Blue Double Lead (2 round and regular terminal)
- 037149 Tap (spigot)
- 037150 Tap Seal
- 037152 Tap Nut
- 037153 Thermal Cut Off
- 037154 Hex Nut (2 required)
- 037155 Face Guard
- 037156 Screw (4 required)
- 037157 PCB Assembly
- 037158 Lock Washer (4 required)
- 037159 Sems (4 required)
- 037160 Control Board Assembly
- 037161 Screw (4 required)
- 037162 Water Level Sensor (3 required)
- 037163 Screw (4 required for each sensor)
- 013731 Wire Ties (4 required)
- 037164 Valve Tube
- 037165 Solenoid Valve
- 037166 Screw (2 required)
- 037167 Valve Cover
- 037168 Heating Element
- 037169 Element Seal (2 required)
- 037170 Element Hex Nut (2 required)
- 037158 Lock Washer (2 required)
- 037159 Sems (2 required)
- 037158 Ground Lock Washer (attached to the unit)
- 037171 Ground Hex Nut (attached to the unit)
- 037172 Strain Relief
- 037173 Cord Set
- 037174 Hex Nut (1 on each ceramic bushing)
- 037175 Lock Washer (1 on each ceramic bushing)
- 037171 Ground Hex Nut (2 required ceramic bushing)
- 037158 Ground Lock Washer (2 required ceramic bushings)
- 037176 Side Panel
- 037177 Screw (4 required)
- 038238 Drain Cap
- 038239 Over Flow Pipe
- 038240 Sealing Gasket
- 038237 Gasket
- 038241 Over Flow Pipe Nut
- 037178 Leg (4 required)
FITTING
314 Ella T. Grasso Ave
- Torrington, CT 06790
- Tele. 1-800-269-6640
- Fax 860-496-9017 www.waringcommercialproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>