SpeaKa PROFESSIONAL 2731204 Monitor Holder with Multiport Hub Instruction Manual

: June 11, 2024
: Speaka PROFESSIONAL

Safety Instructions

Monitor Holder with Multiport Hub

Item no: 2731204 (SP-MM-800)

1 Intended use

The product is a spring loaded three monitor arm with integrated hub. It secures to your table using a clamp.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

2 Delivery contents

Product
Operating instructions

3 Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

4 Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.

5 Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

5.1 General

The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

5.2 Handling

Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

5.3 Operating environment

Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.

5.4 Operation

Consult an expert when in doubt about the operation, safety or connection of the product.
If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.

5.5 Connected devices

Also observe the safety and operating instructions of any other devices which are connected to the product.

5.6 Installation location

Select an installation location for the monitor holder and any supplied accessories that facilitates safe and ergonomic use.

5.7 Before assembly and installation

Verify that the delivery content is complete before assembling the monitor holder and accessories. Do not assemble if any parts are missing.
Prevent damage to the monitor. Refer to the manufacturer instructions that came with the monitor to find out how and where to attach a monitor holder or monitor mount.
Handle the monitor and screen with care. Always lay the monitor flat and use a pad or cloth to protect the table surface and monitor from damage.
Risk of injury and/or damage when unpacking the spring loaded arm! Hold each spring arm together while someone else cuts the zip tie. Slowly release the pressure on the spring arms and open slowly to full length.

5.8 Table mounting

If you mount the monitor holder on a table:

Attach the monitor holder only to a sufficiently stable, horizontal table top. Tables made of glass, ceramic or stone slabs or thin plastic-coated wooden-fibre slabs, are categorically unsuitable for attachments. Furthermore, you must not attach the monitor holder to shelves or similar unstable or unsteady surfaces.
Attach the monitor holder only at a position on the table top that is suitable for this purpose. Consider the significant lever action involved!
The weight of the monitor and monitor holder as well as its fixed position and significant lever action can all cause pressure marks on the table top. For this reason, we do not recommend that you mount it on valuable furniture items!
For safety reasons, the monitor holder and the monitor that is attached to it should be situated only above the table surface. The design of many monitor holders means that it is not suitable for the monitor arm to be situated anywhere other than above the table surface. There is also a danger of it toppling over in certain circumstances!
Ensure that the monitor holder is fixed to the table top securely. Otherwise it could slip off the table top when you are moving the monitor and the monitor holder. As well as causing material damage, this poses a danger of personal injury!

5.9 Removing a monitor

Risk of injury and/or damage from spring loaded arm! Before removing an attached monitor, always set the front arm to the highest position so it cannot “spring up” after the monitor is removed.

6 Maintenance

Adjusting the positions of the monitor and the monitor mount can cause the screws to become loose over time. Check all the screw fittings from time to time.

7 Cleaning and care

Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.

Disconnect the product from the power supply.
Clean the product with a dry, fibre-free cloth.

8 Disposal

Disposal B This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

9 Technical data

9.1 Base plate (multiport hub)

Rated input ……………………… 5 V/DC, 1 A (via USB-A)
Grommet ………………………. 10 – 80 mm
C-Clamp…………………………. 10 – 90 mm

*These values indicate the min./max. table thickness the grommet and c-clamp can fit.

9.2 Monitor arm

Number of monitors ……………….. 3
Capacity per monitor ……………….. 1 – 7 kg
VESA compatible …………………….. 75 x 75, 100 x 100
Monitor size ……………………………… 33.02 – 81.3 (13 – 32″)

9.3 General

Operating / storage conditions …….. -5 to +40 °C, 80 % RH (non-condensing)
Dimensions (W x H x D) ……….. 1530 x 190 x 700 mm
Weight …………………………………….. 9.51 kg

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.

Copyright by Conrad Electronic SE.

*2731204 (SP-MM-800)_V1_0323_dh_ss_en 797561867-2 I1/O1 en