NEC MultiSync M751 Smart LED Display User Manual

MultiSync® M751

MultiSync® M861

MODEL: M751, M861

Setup Manual

NOTE: This product can only be serviced in the country where it was purchased.
(1) The contents of this manual may not be reprinted in part or whole without permission.
(2) The contents of this manual are subject to change without notice.
(3) Great care has been taken in the preparation of this manual; however, should you notice any questionable points, errors or omissions, please contact us.
(4) The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern.
(5) Notwithstanding articles (3) and (4), we will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
(6) This manual is commonly provided to all regions so they may contain descriptions that are pertinent for other countries.

2. Installation

Product warranty does not cover damage caused by improper installation. Failure to follow these recommendations could result in voiding the warranty.

WARNING: Please refer to the “Important Information”.

• We recommend four or more people.
• Four handles are required when transporting.

CAUTION: Avoid locations with extreme temperatures and humidity.
The usage environment for this monitor is as follows. Failure to do so could damage to the product or lead to fire or electric shock.

• The operating temperature: 0 °C to 40 °C/32 °F to 104 °F/ humidity: 20 to 80% (without condensation)
• The storage temperature: -20 °C to 60 °C/-4 °F to 140 °F/ humidity: 10 to 80% (without condensation)

1. Install the remote control batteries.

2. Connect external equipment.
   CAUTION: Use the provided specified cables with this product so as not to interfere with radio and television reception.
   For USB, please use a shielded signal cable with ferrite core.
   For HDMI, RS-232C and DisplayPort, please use a shielded signal cable.
   Use of other cables and adapters may cause interference with radio and television reception.

3. Connect the supplied power cord.

4. Turn on the power for the monitor and the external equipment.
   Switch on the monitor power first.

NOTE: Remember to save your original box and packing material to transport or ship the monitor.

Cable Information

CAUTION: Use the provided specified cables with this product so as not to interfere with radio and television reception.
For USB, please use a shielded signal cable with ferrite core.
For HDMI, RS-232C and DisplayPort, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.

FCC Information

WARNING: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

SUPPLIER’S DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S. Responsible Party:    Sharp NEC Display Solutions of America, Inc.
Address:                             3250 Lacey Rd, Ste 500
Downers Grove, IL 60515
Tel. No.: 630-467-3000
Type of Product:                  LCD Monitor
Equipment Classification:   Class B Peripheral
Model:                                 M751, M861

(For Customers in U.K.)

IMPORTANT

• The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW:    “Earth”
BLUE:                                 “Neutral”
BROWN:                                  “Live”

• As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
  • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
  • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
  • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

• Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

Registration Information

NEC is a registered trademark of NEC Corporation.

DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries.

MultiSync is a trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in Japan and other countries.

All other brands and product names are trademarks or registered trademarks of their respective owners.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

1. Contents

LCD monitor                  Power cord             HDMI cable

Important Information      Screw with washer (M4 x 10 mm)

Clamp           Wireless Remote Control and AAA Batteries*1

*1 Depending on the country where the LCD monitor is shipped to, AAA batteries are not included in the box contents.

2. Installation

[ 1 ]

[ 2 ]

[ 3 ]

[ 4 ]

US/CA

| EU| GB| CN| JP
---|---|---|---|---
| | | |

120 V*

| 230 V| 230 V| 220 V|

100 V

*: Please use this power cord under 125 V power supply.

[US] https://www.sharpnecdisplays.us/
[EU] https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml
[CN] https://www.sharpnecdisplays.cn
[JP] https://www.sharp-nec-displays.com/dl/jp/dp/man_dim/index.html
[Global website] https://www.sharp-nec- displays.com/dl/en/dp_manual/index.html

ENERGY STAR® is a program run by the U. S. Environmental Protection Agency (EPA) and U. S. Department of Energy (DOE) that promotes energy efficiency. This product qualifies for ENERGY STAR in the “factory default” settings and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov.

Service & Support in Europe

Please contact:

Sharp NEC Display Solutions Europe GmbH.
Landshuter Allee 12-14, D-80637 München
Phone: + 49 (0) 89/99699-0
Fax: + 49 (0) 89/99699-500

For the latest information please see
https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml
Data is subject to change without notice.

Sales Office List

For the latest information please see
https://www.sharp-nec-displays.com/global/products.html

Rev. 2

Documents / Resources

| NEC MultiSync M751 Smart LED Display [pdf] User Manual
MultiSync M751, MultiSync M861, MultiSync M751 Smart LED Display, MultiSync M751, Smart LED Display, LED Display, Display
---|---

References

• Homepage | ENERGY STAR
• Homepage | ENERGY STAR
• User's Manual : Display | Sharp NEC Display Solutions
• 取扱説明書・三面図ダウンロード: ディスプレイ | シャープNECディスプレイソリューションズ
• Products | Sharp NEC Display Solutions
• グリーン購入について : J-Mossについて | シャープNECディスプレイソリューションズ
• 製品リサイクルのご案内 | シャープNECディスプレイソリューションズ
• NEC显示产品解决方案
• Sharp NEC Display Solutions Europe - Sharp NEC Display Solutions
• Главная страница - Sharp NEC Display Solutions
• LCD Displays, Projectors, Desktop Monitors, Digital Signage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>