SpeaKa PROFESSIONAL 2731200 Monitor Arm Instruction Manual
- June 11, 2024
- Speaka PROFESSIONAL
Table of Contents
SpeaKa PROFESSIONAL 2731200 Monitor Arm Instruction Manual
1 Intended use
The product is a spring loaded three monitor arm with integrated hub. It secures to your table using a clamp. The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
- Product
- Operating instructions
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
4 Description of symbols
⚠ The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
⚠ Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
5.2 Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of
the product. If it is no longer possible to operate the product safely, take
it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
5.6 Installation location
Select an installation location for the monitor holder and any supplied
accessories that facilitates safe
and ergonomic use.
5.7 Before assembly and installation
-
Verify that the delivery content is complete before assembling the monitor holder and accessories. Do not assemble if any parts are missing.
-
Prevent damage to the monitor. Refer to the manufacturer instructions that came with the monitor to find out how and where to attach a monitor holder or monitor mount.
-
Handle the monitor and screen with care. Always lay the monitor flat and use a pad or cloth to protect
the table surface and monitor from damage. -
Risk of injury and/or damage when unpacking the spring loaded arm! Hold each spring arm together while someone else cuts the zip tie. Slowly release the pressure on the spring arms and open slowly to full length.
5.8 Table mounting
If you mount the monitor holder on a table:
- Attach the monitor holder only to a sufficiently stable, horizontal table top. Tables made of glass, ceramic or stone slabs or thin plastic-coated wooden-fibre slabs, are categorically unsuitable for attachments. Furthermore, you must not attach the monitor holder to shelves or similar unstable or unsteady surfaces.
- Attach the monitor holder only at a position on the table top that is suitable for this purpose. Consider the significant lever action involved!
- The weight of the monitor and monitor holder as well as its fixed position and significant lever action can all cause pressure marks on the table top. For this reason, we do not recommend that you mount it on valuable furniture items!
- For safety reasons, the monitor holder and the monitor that is attached to it should be situated only above the table surface. The design of many monitor holders means that it is not suitable for the monitor arm to be situated anywhere other than above the table surface. There is also a danger of it toppling over in certain circumstances!
- Ensure that the monitor holder is fixed to the table top securely. Otherwise it could slip off the table top when you are moving the monitor and the monitor holder. As well as causing material damage, this poses a danger of personal injury!
5.9 Removing a monitor
- Risk of injury and/or damage from spring loaded arm! Before removing an attached monitor, always set the front arm to the highest position so it cannot “spring up” after the monitor is removed.
6 Maintenance
Adjusting the positions of the monitor and the monitor mount can cause the screws to become loose over time. Check all the screw fittings from time to time.
7 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
8 Technical data
8.1 Base
8.2 Monitor arm
8.3 General
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2731200, 2731201, 2731202, 2731203_V2_0323_dh_ss_en 18014399307966475-2 I3/O2 en