Summerwind SWT0002 RF Remote User Manual

Summerwind SWT0002 RF Remote

Product Information

This product is a fan and light control device that comes with the following features:

• Three-speed options for the fan
• On/Off button for the fan
• On/Off button for the light
• Dimming function for the light
• Timing function for the light
• On/Off button for both the fan and light
• Color-changing function for the light
• Pairing function with the receiver

Product Usage Instructions

To use this product, please follow these instructions:

1. Select the desired speed option for the fan using the one-speed, two-speed, or three-speed buttons.
2. Turn the fan on or off using the On/Off button.
3. To turn the light on or off, press and release the button.
4. To dim the lamp, press the button once.
5. To start the timing function, press the button once.
6. To turn both the fan and the light on or off, press the button once.
7. To change the light color, press the button once.
8. To pair with the receiver, keep pressing the button until pairing is complete.
   Please note that any changes to the antenna or device are not permitted and could result in voiding your authority to operate the device. Modifying the product without approval could also void your authority to operate it. Please comply with all FCC RF exposure compliance requirements.

FUNCTIONS

1. One speed Two speed Three speed
2. Button: This button turns the fan On or off.
3. The Press and release the button to turn the light ON OFF
4. Press this button to dim the lamp
5. Press this button to start the timing function
6. Press this button to turn the fan and light on/off
7. Press this button to change the light color.
8. Keep pressing this button to pair with the receiver

IMPORTANT NOTE

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.

Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
This device complies with Industry Canada RSS for license-free radio equipment. Operation is allowed under the following two conditions: (1) the equipment shall not produce interference, and (2) the equipment used must accept any radio interference, even if the interference may endanger the operation of the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada’s Technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>