BRNEWO K5 Alarm Clock Touch Night Light Instructions

BRNEWO K5 Alarm Clock Touch Night Light

Product Information

The device has been evaluated and tested to meet the general RF exposure requirements set by the Federal Communications Commission (FCC).

This means that users can operate the device without any restrictions on portable exposure conditions. The device has been designed to emit radio frequency (RF) energy within safe levels to ensure user safety.

Product Usage Instructions

When using the device, it is important to follow these guidelines:

• Keep the device away from the body while it is in use.
• Avoid using the device in close proximity to the body for extended periods of time.
• Do not modify or tamper with the device’s internal components or antenna.
• Use only accessories approved by the manufacturer.
• Follow all instructions provided in the user manual.

By following these guidelines, users can safely use the device without any risk of harmful RF exposure. If you have any questions or concerns about the device’s usage, please refer to the user manual or contact the manufacturer for further assistance.

Light touch control

Night light touch key:

• Press for 1 second lo turn the light on and off.
• Long press for 2 seconds to adjust the appropriate brightness of the light.

There are a total of 12 lighting colors:

• 8 single colors+3 mixed colors+1 breathing light mode.

Button control

1. icon: press to sleeping music, long press to record
2. icon: press to switch to the previous song, long press to turn down the volume
3. icon: press to pause/play, long press to turn on/off the intelligent sound control light
4. icon: press to switch to the next song, long press to turn up the volume
5. icon: press to select all functions and confirm settings, long press to enter function setting
6. o Key icon: Microphone hole

Description of panel indicator

• Time mode
• Blue mode
• Alarm 1 mode
• Alarm 2 mode
• Night light timing mode
• Sleeping music mode
• Child lock mode
• Recording mode
• Low battery mode
• Intelligent sound control light mode
• Snooze mode

Operation instructions for the rear panel

POWER: Power Switch

TYPE-C: Charging port (5V1A-2A)

• This product needs to be connected to the charging cable when it is used, and the red light is on when charging.

RESET: Reset button

• When the device breaks down, use a sharp object to insert the reset button for 5 seconds to turn it on again.
• Note: This function will return all settings to the initial settings, please don’t use it arbitrarily.

Key function operation

1. Time mode:
   Press the M key to switch to the time mode0, the screen indicator will flash slowly. Long press the M key to enter the time setting and the ‘hour’ digit will be flashing, press or to set the ‘hour’ time, press the M key again to set the ‘minute’ time, then press the M key after the setting is completed and the time will be displayed properly.

2. Blue mode:
   Press the M key to select to enter the BLUE mode, the indicator light on the screen will be flashing slowly, you can use the mobile phone to search KS device name, click to finish the connection; After the connection is done, the bluetooth icon on the screen is on;

3. Alarm 1,2 mode:
   Press the M key to switch to the alarm mode, and the bell icon will be flashing slowly, long press the M key until the ‘hour’ digit flashes, press to set the ‘hour’, then press the M key to set the ‘minute’, when the setting is completed, press the M key to enter the music selection (press or to select all the 9 tracks, the first eight tracks are system audios, the ninth one can be recorded according to what you like, detailed operations are shown in the Recording mode at the 7th one as follows. Besides, the default setting is mute).

   • Then press the M key to enter the alarm switch setting(ON & OFF), and then press the M key to finish the alarm setting;
   • The bell icon indicator light will be on when the setting is turned ON, and it will be off when turned OFF.
   • After alarm 1 is set, press the M button, and the screen icon flashes, Long press M to set the time ,
   • Repeat the above operation to set the alarm2.
   • The intelligent alarm clock can record your favorite audio as the alarm bell.
   • Please refer to the operation as follows at7. Recording mode.

4. Night light liming mode:
   After selecting the light color by touching the top of the device.press the M key to select the countdown light off mode , the light bulb icon will be flashing slowly, long press the M key to enter the setting, the screen displays 15MIN-30MIN-60MIN-OFF, press or to select an appropriate time, then press the M key to confirm the lighting time; After the function is turned on, the bulb icon indicator light will be on, and vice versa.

5. Sleeping music mode:
   Press the key, the sleeping music icon lights up , then the sleeping music plays, press or to choose music, 1-8 natural musics are selective. Long press or to adjust the volume, then short press the M key to enter the playing time setting (15MI N-30M I N-45M IN-60M IN-OFF) After completion, press the M key to finish the setting; After the function is turned on, the sleeping music icon indicator will be on, and vice versa.

6. Child lock mode:
   Press and at the same time with both hands, the child lock function is turned on, and the screen indicator icon lights up. All the key function has no effect under this model, including the switch button, in this way prevents children from pressing it randomly; To cancel, press and at the same time to turn off the function;

7. Recording mode:
   Long press to enter the recording mode , and the recording indicator icon lights up, speak to the microphone to record audio within 10 seconds, press the M key to confirm after the recording is completed; The device will extract the recorded audio and play it repeatedly, confirm and press the M key to save and exit; If you are not satisfied and need to re-record, please repeat the above process; The recorded audio can be used as an alarm clock;

8. Low power mode:
   When the device is out of power, the low battery indicator icon will light up, the light will be automatically turned off to save power, and there will be a low battery warning tone every 15 seconds. Please charge as soon as possible at this time;

9. Intelligent sound control light mode:
   Long press the key to enter the sound control light mode , the sound control light icon lights up, and the MIC will monitor continuously sounds that are more than 2 seconds(cries, noises, etc.), and the lighting mode will be automatically turned on, and it will be automatically turned off if there is no any sound in 10 minutes;
   Note: When this function is turned on, the light colors cannot be controlled. To cancel this function, please long-press the key again;

10. Snooze mode:
    When the alarm rings over 1 minute without any operation, or without touch at the light control on the top of the device, The device will enter the snooze mode and the snooze indicator light will be on; To turn off the alarm or to cancel the snooze mode, please press any key at the bottom, and the snooze Indicator light turns off;

Attention

1. Please use 3C certified DC5V1-2A charger to charge!
2. When pressing the bottom key, do not touch the touch key on the top of the device, otherwise, the bottom key will not work!
3. When the device does not work, please confirm whether the child lock function is turned on. If it is turned on, please cancel it first!
4. When the light cannot be controlled or only in warm color, please check whether the intelligent sound control light mode is turned on, if it is turned on, please cancel it first!
5. When the alarm rings, it will enter the snooze mode when there is no operation or no touch on the top touch key, and you can press any key on the bottom to cancel the snooze mode!

Note:
The operating functions and data in the above manual will be different as the actual details of the product are improved and optimized, so the actual operation prevails.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection\ against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
  Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>