Supuzz B0CTZNLGGJ Demonstration for Children’s Chair Set Instruction Manual
- July 4, 2024
- Supuzz
Table of Contents
Supuzz B0CTZNLGGJ Demonstration for Children’s Chair Set
Specifications
- Brand: Supuzz
- Product: Children’s Chair Set
- Material: PP (Polypropylene)
Product Usage Instructions
- Locate and install the stool legs into the corresponding slots on the circular seat disc.
- Press down firmly to secure each leg into place.
- Install the remaining three legs one at a time using the same method.
- Check for stability post-installation and make adjustments if needed.
- Rotate and tighten the nut slots for the square seat disc.
- Install the four legs securely following the same process.
- Add the four anti-skid foot pads.
- Install the backrest by aligning it with the grooves, ensuring correct positioning.
- Secure the backrest in place by pressing down firmly.
- Check alignment and stability after assembly.
- Attach the four table legs to the corresponding slots on the tabletop.
- Rock the legs back and forth to secure them in place.
- Install the remaining legs in the same manner.
- Thoroughly check the installation and test for stability.
FAQ
- Q: What should I do if I encounter any issues during installation?
- A: If you face any difficulties or stability problems during installation, please contact our customer service for assistance. We are here to help!
When unpacking, friction between the PP material and the film may generate static electricity, causing it to attract hair and dust. This is a normal phenomenon, and it will disappear approximately two days after installation.
Round Stools
Assembly Components
- Four Legs *4
- Circular Seat Disc *1
- Locate the corresponding slots for installing the stool legs.
- Then, find the corresponding slots for the circular seat disc.
- Once located, press down firmly to secure into place.
- Proceed to install the remaining three in the same manner, one at a time.
- After installation, please check for stability and make any necessary adjustments. If you encounter any issues, feel free to contact customer service for assistance.
Child Seat with Backrest
Assembly Components
- Four Legs *4
- Square Seat Disc *1
- Backrest*1
- Anti-Skid Foot Pads *4
- Locate the corresponding nut slots for installation. Rotate clockwise and tighten. Next, proceed to install the four legs, following the same steps.
- Ensure they are tightened securely.
- Install the four anti-slip pads.
- Proceed to install the backrest by locating the installation grooves for the backrest.
- Find the direction of the backrest buckles.
- Confirm if the installation position corresponds correctly.
- Press down firmly to secure in place.
- Inspect for proper alignment.
Perform an overall check for stability. If there are any issues, please contact our customer service for assistance.
Installation of Round and Square Tables
Assembly Components
-
Four Legs *4
-
Square Seat Disc *1
-
Anti-Skid Components *4
-
Assembly of the Four Table Legs
-
Pay attention to the slots.
-
Locate the protruding slots on the table legs
- Find the grooves on the tabletop
- Press down while simultaneously rocking back and forth along the white lines
- Proceed to install the remaining three table legs in the same manner.
- Check the installation thoroughly and stability test.
- The installation process for the square table is the same as the round one. If you encounter any issues, please contact customer service for assistance.
THANK YOU!
For any inquiries, please contact our customer service.
For more detailed installation tutorial videos, you can view the installation
video guide on the product details page.
https://www.amazon.com/dp/BOCTBGM68R.