Infray SD-002 LED Flashlight User Manual
- June 11, 2024
- infray
Table of Contents
Infray SD-002 LED Flashlight
Specifications
- Brand Infray
- Special Feature Adjustable
- Color Black
- Power Source Battery Powered
- Light Source Type LED
- Material Aluminum
- Water-proof Level IPX5
- White Brightness 270 Lumens
- Included Components Pocket Clips
- Product Dimensions 83″D x 0.71″W x 0.71″H
- Voltage 3 Volts
- LightPath Distance 50 Meters
- Battery Cell Composition Alkaline
- Item Weight 0.11 Pounds
- Number of Batteries 2 AA batteries are required.
- Battery Description Alkaline
- Runtime 7 hours
- Temperature Range 6500 Kelvin
- Cutting Diameter 18 Millimeters
Introduction
This tiny penlight has the most recent CREE XPG3 LED and has a maximum output of 300 lumens. It is a good option for inspection, work, repair, and emergencies since it is extremely bright in the dark and is powered by 2 alkaline AAA batteries (not supplied). with a length of 5.7 inches and a weight of only 42g, infray LED penlight. It is sized to fit into a pocket, shirt, bag, or keychain and is meant as an EDC torch. The pen light’s retractable pocket clip makes it simple to attach it to a belt or use it as a hat light. Simply rotate the penlight’s head to change the focus from a wide to a narrow beam.
illuminates small, focused regions with a narrow beam or a wider area with a wide beam. The penlight has three adjustable settings: High, Low, and Strobe. It can be used for 7 hours on High and 14 hours on Low. Unbreakable, scratch- resistant polycarbonate lens with IPX5 waterproof and MIL-SPEC wear and corrosion resistance anodized aircraft aluminum structure. suitable for outdoor activities like cycling, trekking, and camping.
Product Analysis
How To Use
The INFRAY SD-002 LED torch is a strong, dependable, and simple-to-use torch. This is how to use it:
-
Install Batteries
Remove the flashlight’s tail cap, then place the correct batteries within the compartment in accordance with the indications inside. Make sure to place the batteries in the compartment with the proper polarity, as noted there. -
Turn On/Off
To activate the torch, fully depress the tail switch. To turn it off, press it one more. The torch also features a momentary-on feature that allows you to press the switch halfway to turn it on for a brief period of time before releasing it to turn it off. -
Adjust Brightness
To change the brightness level, twist the flashlight’s head. For greater brightness, turn the head to the right; for reduced brightness, turn it to the left. -
Zoom In/Out
The flashlight’s head may be moved back and forth to change the focus and zoom in or out as necessary. -
Strobe/SOS
When the torch is on, quickly press the tail switch twice to activate the strobe or SOS mode. To go back to normal mode, press it once more.
The INFRAY SD-002 LED torch is a high-performance torch, therefore it’s vital to keep in mind that using it at its maximum brightness for an extended amount of time may cause it to get hot. It is advised to use the torch at lower brightness levels for extended periods of time to avoid overheating. Additionally, it’s a good idea to slightly loosen the tail cap when not in use to prevent battery drain. This will also stop the torch from being accidentally turned on.
How To Select Modes
By rapidly pushing the tail switch many times, you can switch between the several modes of the INFRAY SD-002 LED torch. The mode selection operates as follows:
- Normal mode: The torch can be activated in normal mode by fully depressing the tail switch. To turn it off, press it one more.
- Strobe mode: Double-click the tail switch while the torch is on to turn on the strobe mode. The torch will begin to flash in a strobe pattern quickly. To get back to regular mode, double-click the tail switch once again.
- SOS mode: When the torch is turned on, triple-click the tail switch to activate the SOS mode. In an emergency, the torch will flash in a preset SOS pattern that can be used as a distress signal. To go back to regular mode, triple-click the tail switch once more.
It’s crucial to remember that the order of the clicks determines how the mode selection functions. For the mode to change, the clicks must be swift and consecutive. The mode might not change if you click too slowly or repeatedly.
Additionally, the INFRAY SD-002 LED torch has a memory function that enables it to recall the most recent mode you used and start in that mode the following time you use it. This can be helpful if you frequently use one set and don’t want to constantly switch between them when you turn on the torch.
FAQ’s
What is the maximum brightness of the Infray SD-002 LED Flashlight?
The maximum brightness of the Infray SD-002 LED Flashlight is 800 lumens.
Is the flashlight rechargeable?
No, the Infray SD-002 LED Flashlight is not rechargeable. It uses 3 AAA batteries.
How long does the battery last?
The battery life of the flashlight depends on the brightness setting and the type of batteries used.
What is the runtime of the flashlight?
The runtime of the flashlight ranges from 2 hours at maximum brightness to 24 hours at the lowest setting.
What type of LED does the flashlight use?
The Infray SD-002 LED Flashlight uses a high-quality CREE LED.
Is the flashlight waterproof?
Yes, the flashlight is waterproof with an IPX4 rating, which means it can withstand splashes of water from any direction.
Is the flashlight adjustable?
Yes, the Infray SD-002 LED Flashlight has an adjustable focus, allowing you to zoom in for intense spotlighting or zoom out for a wider and brighter beam.
Does the flashlight come with a warranty?
Yes, the flashlight comes with a 2-year warranty.
What is included in the package?
The package includes the Infray SD-002 LED Flashlight, a holster, a lanyard, and a user manual.
What type of LED does Infray Flashlight use?
Infray Flashlight uses high-quality CREE LED in its flashlights.
Is Infray Flashlight waterproof?
Many Infray Flashlight models are waterproof with an IPX rating. The specific level of waterproofing depends on the model you are interested in. You should check the product specifications to determine the waterproof rating of the model you are interested in.
Is Infray Flashlight adjustable?
Yes, most Infray Flashlight models are adjustable and offer different lighting modes and settings to suit different needs.
What is the maximum brightness of Infray Flashlight?
The maximum brightness of Infray Flashlight varies depending on the specific model. Some models can produce up to 1000 lumens or more.
Is Infray Flashlight rechargeable?
It depends on the specific model of the Infray Flashlight. Some models are rechargeable while others use disposable batteries. You should check the product specifications to determine whether the model you are interested in is rechargeable or not.
Video – Product Overview
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>