Camcamp SC12 4G LTE No WiFi Cellular Security Camera Outdoor Wireless User Manual
- June 11, 2024
- CAMCAMP
Table of Contents
SC12 4G LTE No WiFi Cellular Security Camera Outdoor Wireless
User Manual
Product Overview
Interface Description
| SIM Card Slot | 4G SIM card slot |
|---|---|
| Micro SD Card Slot | For local storage (Up to 128GB, SD Card Not Included) |
| Reset Button | Press and hold for 5 seconds to restore factory settings |
| Speaker | Used to play system prompts and implement two-way audio |
| On/Off | Power button |
| Charging Port | Support Type-C port adapter and solar panel charging |
| Indicator Lights | SIM card not found: red and blue lights flash alternately |
SIM card arrears or out of service: red and blue lights flash alternately
slowly
Steady red light: Signal poor, network connection unsuccessful
Red light flashing slowly: Camera 4G module is abnormal Steady blue light:
Network connect succeed
Lens| Record pictures and videos
Mic| For capturing environmental sound and implement two-way audio
PIR| Triggers recording and alarms when the human moves in front of the device
Antenna| Receive signal
Dual source light| Emits infrared and white light
Light Sensor| Collect ambient brightness value, will on when the illumination
is lower than 2LUX
Add Camera to the APP
-
Download the APP and register
Please see “Easy Guide” for download link -
Insert SIM Card and Micro SD Card
Insert the SIM card as shown below; if you need to record locally, you need to buy a Micro SD card and insert it into the card slot. Please format the Micro SD card in the APP for the first time. -
Power On the Camera
-
Scan QR Code to Connect Camera
Follow the instructions below to scan the QR code on the camera in the APP
-
SIM Card Data Recharge
There are two kinds of SIM cards used with this camera: -
The SIM card provided by us can only be used as a data card, and cannot be used for phone calls.
-
The SIM cards purchased by users themselves need to support 4G data and have data packages. For SIM card recharge fees and other questions, please consult the relevant operator.
The following only describes how to recharge the SIM card provided by us in the app, the tariff is based on the actual price in the app.
Connect the solar panel
APP Function Introduction
Notice:
- This device is battery-powered, and the battery life will be affected by the wake-ups time and the number of times. Therefore, if the PIR sensor alarm detection function is used in an environment with a large flow of people, it’s recommended to turn off PIR detection or set it to low sensitivity to reduce the number of device wake-up calls and alarms to extend the battery life. Please charge the device when the power is low, long time battery without power may cause battery damage.
- Please confirm the 4G signal coverage and signal strength of the installation environment before installation, especially in remote mountainous areas.
- This camera is a low-power smart camera, which can support APP remote wake-up, PIR detection wake-up, and key-press wake-up. Each time it wakes up and works for a short time, it will automatically enter the sleep state. The working time of the device can be adjusted in the APP.