LandWORKS GUT146 Rotomolded Ice Cooler User Manual
- June 11, 2024
- Landworks
Table of Contents
LandWORKS GUT146 Rotomolded Ice Cooler
Product Information
The 45QT Cooler is a heavy-duty cooler that can hold up to 42.7 liters of contents. It has a durable sealing gasket that ensures excellent leak-proofing of the cooler box. The external dimensions of the cooler are LxWxH: 24.6 x 16.1 x 15.4 (625x410x390mm), and it weighs 20.7 lbs (9.4kg). The cooler has a new endurable latch for easy locking and opening, and friction pads that increase the stability of the cooler box. The heavy-duty handles use ULTRA strength polyester rope, and the unique design of the recessed plug helps you open the cooler and drain liquid from the cooler easily.
The cooler is rotomolded, making it virtually indestructible, and has non-slip bottoms to keep it in place. The freezer-grade rubber gasket ensures a tight seal that blocks out the heat and locks the cold inside. The cooler also has quick drain system with leak-free easy drain flow spouts and a never-break hinge system with interconnected dural stainless steel hinges. The safer tie- down slots keep it in place regardless of the activity you are performing.
Product Usage Instructions
Before using the cooler, carefully review and understand all instructions provided in the manual. To ensure the best performance, pre-chill the cooler before use. Treat your cooler as a temperature maintainer and keep it in a cool place as much as possible.
When using dry ice, ensure that you loosen the plug button before putting it into the cooler to avoid any explosions. To lock or unlock the cooler, use the heavy-duty rubber latches that are designed to last longer than plastic brackets.
To drain liquid from the cooler, use the unique design of the recessed plug that helps you open the cooler easily. The quick drain system with leak-free easy drain flow spouts ensures that the draining process is mess-free.
When transporting the cooler, use the heavy-duty handles that use ULTRA strength polyester rope and the safer tie-down slots to keep it in place. The non-slip bottoms ensure that the cooler stays in place even during rough activities.
For any further assistance or support, contact the Great Circle USA Support Line at 1-866-493-0524 or email help@greatcircleus.com.
WARNING:
Carefully review and understand all INSTRUCTIONS prior to operating this
device. Failure to follow the safety rules and other basic safety precautions
may result in serious personal injury. Keep these instructions in a safe place
and accessible so that they can be reviewed as required. Keep these
instructions to assist in future servicing needs.
TECHNICAL DETAILS
PRODUCT INTRODUCTION
- Durable sealing gasket ensures excellent leakproof of the cooler box.
- New endurable latch for easy locking and opening.
- Friction pads increases the stability of the cooler box.
- Heavy duty handles uses ULTRA strength polyster rope
- The unique design of recessed plug helps you open the cooler and drain liquid from the cooler easily.
Tips to make your coolers best performance:
- Pre-chilling. Treat your cooler as a temperature maintainer. Now that you think about it in this way, you can understand why it is so important to bring the internal temperature of the cooler down before adding ice. This process is referred to as pre-chilling and is essential for the proper operation of your cooler. We recommend placing dry ice in the cooler for at least 1 hour. Aways use proper safety precautions when handling dry ice including the use of gloves. If dry ice is not available place the cooler in a chest freezer overnight. Another option is to fill up the cooler with ice and leave overnight, then change to fresh ice before using.
- If possible, chill or freeze any goods before placing them in the cooler. The ice will last much longer.
- Water from melted ice is not a bad thing! Cold water that comes from ice after a few days helps insulate the remaining ice better than empty airspace.
- Open your lid as few times as possible to reduce warm air coming from the outside. Always shut the lid with latch lock in correct position after you opened the cooler.
- Ice performance can vary greatly. Block ice will melt slower than cube ice, but cube ice with a larger total surface area will cool items faster. You may want to consider a mixture of both types. Start with very cold, solid ice versus wet ice that has already begun to met. Besides, the temperature, times you open the lid, will also influence the ice performance too.
- Fill cooler with as much ice as possible.
- Your cooler is dry ice approved. Dry ice (CO2), made from frozen carbon dioxide, is an excellent way to achieve super cold temperature, without any water residue. Always handle dry ice with caution and wear protective gloves, as it can quickly freeze burn skin (-109°F). Allow for adequate ventilation of any CO2 gas. It may be helpful to add some dry ice to your ice mixture to keep it colder longer.
WARNING: Dry ice may explode in an airtight container, loose the plug
button before you put dry ice into cooler
Great Circle USA
Support Line : 1-866-493-0524
help@greatcircleus.com
www.greatcircleus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>