LandWORKS 20QT Rotomolded Ice Cooler Instruction Manual
- June 11, 2024
- Landworks
Table of Contents
LandWORKS 20QT Rotomolded Ice Cooler
WARNING:
Carefully review and understand all INSTRUCTIONS prior to operating this
device. Failure to follow the safety rules and other basic safety precautions
may result in serious personal injury. Keep these instructions in a safe place
and accessible so that they can be reviewed as required. Keep these
instructions to assist in future servicing needs.
TECHNICAL DETAILS
Item No.| Color| Volume Capacity| External Dimension|
Net Weight
---|---|---|---|---
GUT145| White| 20 quart equals
19 liter approx
| 49x36x38cm| 6kg/13.23lbs
GBT013
PRODUCT INTRODUCTION
- Durable sealing gasket ensures excellent leak proof of the cooler box.
- New endurable latch for easy locking and opening.
- Friction pads increases the stability of the cooler box.
- Recessed drain plug-helps drain liquid from cooler box easily.
Tips to make your coolers best performance:
- Pre-chilling. Treat your cooler as a temperature maintainer. Now that you think about it in this way, you can understand why it is so important to bring the internal temperature of the cooler down before adding ice. This process is referred to as pre-chilling and is essential for the proper operation of your cooler. We recommend placing dry ice in the cooler for at least 1 hour. Always use proper safety precautions when handling dry ice including the use of gloves. If dry ice is not available place the cooler in a chest freezer overnight. Another option is to fill up the cooler with ice and leave overnight, then change to fresh ice before using.
- If possible, chill or freeze any goods before placing them in the cooler. The ice will last much longer.
- Water from melted ice is not a bad thing! Cold water that comes from ice after a few days helps insulate the remaining ice better than empty airspace.
- Open your lid as few times as possible to reduce warm air coming from the outside. Always shut the lid with latch lock in correct position after you opened the cooler.
- Ice performance can vary greatly. Block ice will melt slower than cube ice, but cube ice with a larger total surface area will cool items faster. You may want to consider a mixture of both types. Start with very cold, solid ice versus wet ice that has already begun to met. Besides, the temperature, times you open the lid, will also influence the ice performance too.
- Fill cooler with as much ice as possible.
- Your cooler is dry ice approved. Dry ice (CO2), made from frozen carbon dioxide, is an excellent way to achieve super cold temperature, without any water residue. Always handle dry ice with caution and wear protective gloves, as it can quickly freeze burn skin (-57°C). Allow for adequate ventilation of any CO2 gas. It may be helpful to add some dry ice to your ice mixture to keep it colder longer.
WARNING: Dry ice may explode in an airtight container, loose the air release button before you put dry ice into cooler.
HEAVY DUTY RUBBER LATCHES
NEVER CHANGE THOSE PLASTIC BRACKET EVER AGAIN!
NON-SLIP BOTTOMS
KEEP YOUR COOLER IN PLACE
QUICK DRAIN SYSTEM
LEAK-FREE EASY DRAIN FLOW SPOUTS
SAFER TIE-DOWN SLOTS
KEEP IT IN PLACE REGARDLESS OF THE ACTIVITY YOU ARE PERFORMING
ROTOMOLDED CONSTRUCTION
VIRTUALLY INDESTRUCTIBLE
FREEZER-GRADE RUBBER GASKET
TIGHT SEAL BLOCKS OUT THE HEAT. LOCKS THE COLD INSIDE
NEVER-BREAK HINGE SYSTEM
INTERCONNECTED DURAL STAINLESS STEEL HINGES
North America Contact Information Great Circle USA
Support Line: 1-866-493-0524
help@greatcircleus.com
www.greatcircleus.com
UK&EU Contact Information Great Circle USA Service@greatcircleus.com www.greatcircleus.com www.greatcircleus.co.uk
References
- Great Circle UK - Heavy Duty and Affordable - greatcircleus.co.uk
- GCM Outdoor Power Equipment & Tools, Lawn & Garden Tools