Airzonecloud RTHV Horizontal Vertical Double Deflection Supply Grille Installation Guide
- June 11, 2024
- Airzonecloud
Table of Contents
Airzonecloud RTHV Horizontal Vertical Double Deflection Supply Grille
Product Information
The FLOWTOOL is a horizontal-vertical double-deflection supply grille made from extruded aluminum. It comes with a standard frame measuring 26 mm and mobile horizontal and vertical slats that can be individually adjusted to adapt the range and air stream to the required needs. The grille has an integrated airflow regulation damper, which can be manually operated by means of a screw.
The product is available in ES, EN, PT, FR, IT, and DE languages and has the following specifications:
- Model: RTHV
- Height range: 100 mm – 200 mm
- Length range: 200 mm – 800 mm
Product Usage Instructions
To install the FLOWTOOL, follow the steps below:
- Insert the grille into the opening until it clips into place.
- If installing on a ceiling, use screws to secure it tightly in place.
- If required, use an assembly frame for installation.
To adjust the airflow, use the screw to manually operate the integrated airflow regulation damper.
INTRODUCTION
RTHV diffusion grille made from extruded aluminum with a standard frame measuring 26 mm and mobile horizontal and vertical slats that can be individually adjusted, adapting the range and air stream to the required needs. It has an integrated airflow regulation damper, which can be manually operated by means of a screw.
Dimensions
The dimensions may vary depending on the type of fixing or regulation.
Measuring
RTHV[010][030][B][K][RT]: RTHV measuring 100×300 mm in white with clip fixing and regulated by screw.
COMPATIBLE ACCESSORIES
INSTALLATION
For ceiling installation, the use of screws is necessary. Requires assembly frame.
RTHVxxxxxxxxKxx
- Insert the grille into the opening until it clips into place.
RTHVxxxxxxxxTxx
- Fit the grille into the opening and screw it tightly into place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>