Huion Kamvas Studio 16 Portable All in One Drawing Tablet User Manual
- June 11, 2024
- Huion
Table of Contents
Kamvas Studio 16
Display Introduction
Thanks for choosing HUION Kamvas Studio 16 pen computer.
With a built-in Windows operating system, Kamvas Studio 16 is a portable all-
in-one drawing pen computer supporting both finger touch and pen touch. Kamvas
Studio 16 can be used for browsing websites, playing games, and watching films
as a computer offers, and at the same time can be used for writing, drawing,
graphic design, and video editing as a pen display does, which makes it
powerful and useful. Moreover, PS, AI, SAI, GIMP, Painter, and many other
professional programs run smoothly on Kamvas Studio 16.
To better know and use this product, please read this user manual carefully.
Note: Design and specifications are subject to change without notice. The
pictures in the User Manual are for reference only.
Product Overview
Notice: Supporting stepless angle adjustment, the kickstand can hold the device within a 30-75° angle with the desktop. The stand uses hinges to provide a limited bearing capacity, so it is only applicable to scenarios such as watching videos, playing games or browsing web pages. For drawing, please use the accompanying drawing stand.
1.Capacitive Touch
Capacitive touch, in cooperation with the electromagnetic digital pen, can
greatly improve creation efficiency.
Touch gestures preset in Windows are supported. Other functions depend on
whether they are supported by the software.
General Functions
Finger| Gestures| Action
One-finger| Tap| Select
Double tap| Open the file
Press and hold| Show more commands (like right-clicking)
Press and drag| Move the file
Two-finger| Slide horizontally or vertically| Scroll
Pinch in or stretch out| Zoom out or zoom in
Three-finger| Swipe up| Show all open windows
Swipe down| Show the desktop
Swipe left or right| Switch between open apps
or windows
Four-finger| Swipe up| Show all open windows
Swipe down| Show the desktop
Swipe left or right| Switch desktops
Notice: The touch input can be disabled in the driver.
2.Accessories
3.Stand Adjustment
This adjustable drawing stand is specially designed for your all-in-one pen
computer and you can adjust it to find a comfortable angle according to your
usage habit when painting and creating.
4.Charging Mode
In order to have a better experience, please use the attached power adapter to
fully charge your device before first use. Then press and hold the POWER
button to start it.
Driver
Installation and Update
The driver has been preinstalled on Kamvas Studio 16.
The driver will be updated constantly. It is suggested to check and update the
driver from our official website
www.huion.com/download/ so as to ensure that
the device has the latest features and functions.
Driver Interface Preview
On the “Pen Computer” interface, users can set the Working Area of the pen
computer.See
Section
2. Digital Pen
Users can set functions of the pen on this “Digital Pen” interface, including
Press Key, Mode
selection, Pressure Sensitivity Adjustment, and Pressure Test.See
Section
3. Store
Huion Store is where you can get the latest information about the product
such as its FAQ or sales promotion. In addition, you can also purchase Huion’s
other products or accessories here.
4. Add Programs
- Some programs which have already been opened will appear for you to choose from after clicking Add a Program on the screen. For more programs, click Browser and choose the item that you want to get it added.
- For different programs, the press keys, the working area and the pressure curve can be set differently. When switching from a program to another, the driver will automatically switch to the set functions accordingly.
- When you select “All programs”, the functions of press keys that you set are valid for every program. By clicking Add a Program from the drop-down list, you can set the functions for a specific program and hence have unique settings for different programs. After that, when you launch a specific program, the Driver will automatically recognize it and the setting features will change to its corresponding ones.
5. Setting
Users can set the functions of a driver on this interface, including check out
Device information, Backup setting, General setting, and its version.See
Section
6. Common Problems
Click “?” and jump to Forum in our website
https://support.huion.com/en/support/home to get a user manual or feed back
the problems to us.
7. Enable Touch Input
“Enable touch input” is checked by default. In this case, the finger touch can
be used. If “Enable touch input” is unchecked, the finger touch is disabled.
In this case, touch input can only be realized by the digital pen.
Pen Computer Setting Select the Working Area tab to adjust the ratio of the
distance of pen movement on the pen computer to that of the corresponding
cursor movement on the monitor. By default, the entire active area of the pen
computer maps to the whole monitor.
1. Working Area Setting
Define the pen computer area that will be mapped to the monitor. Three modes
on the driver can be chosen:
[1] Full Area: The entire active area of the pen computer will be mapped to
the monitor. It is the default setting.
[2] Screen Ratio: The ratio of the active pen computer area depends on that of
the display device. In Screen Ratio mode, these two ratios keep the same. For
example, if you choose the screen ratio and draw a circle on the pen computer,
then a circle appears on the monitor that has been connected to the pen
computer, in this case, some parts of the screen of the pen computer may not
work. But if you don’t choose the screen ratio and draw a circle, then the
circle may change into an oval on the monitor.
[3] Custom Area:
1> Enter coordinate values.
2> Users can adjust the working area of the pen computer by changing the
outlines of the smaller rectangle. Users can also drag the two blue rectangles
to select the active areas of the digital pen on the screen and the pen
computer. (see picture 1 and 2).
2. Rotate Working Area
Both left-handed and right-handed users can freely use the pen computer
because it can be rotated by 0°, 90°, 180°or 270°.
3. Calibrate Your Pen Display
Click Monitor Calibration tab and follow the instructions to calibrate your
pen display.
Please use the digital pen to click on the center red dot of the cross in a common pen-holding posture. You can cancel Calibration and restore default.
1. Press Key
You can use this digital pen to interact with your device, including drawing,
writing, moving
files, or activating the functions of pen press keys.
Digital Pen Setting
1. Press Key
You can use this digital pen to interact with your device, including drawing,
writing, moving files, or activating the functions of pen press keys.
Refer to this table of settings below to help you decide if you want to change
the existing settings.
Note: The performance of functions in the table below is up to the device
that you have connected. And this table is subject to change without notice.
The settings of the press keys’ functions can be found in the following list.
The functions of the press keys can be set as:
Keyboard Key| Click on the input box above and enter a valid key combination
to create a shortcut.
---|---
Mouse Key| Select the functions of a Mouse or Wheel.
Mouse: Mouse Left Button, Mouse Right Button, Mouse Middle Button, and Double-
left Click.
Wheel: Wheel Forward and Wheel Backward. Other functions: Ctrl, Alt, Shift,
and Win.
Switch| Select between Switch Screen, Switch Brush, Mouse Mode On/Off, and
Game Mode On/Off.
Run Program| Click Browse and select the program that you want to run quickly.
After that, press the key to launch the item.
System Application| You can apply these functions to press keys: Lock the
Screen, Sleep, Power Off, Show/Hide Desktop, Task View, Start Menu, and
Calculator.
Multimedia| You can apply these functions to press keys: Previous Song, Next
Song, Play/Pause,Volume up, Volume down, and Muted.
Precision Mode| You can toggle between normal precision and a precision that
you choose, from Fine to Ultra Fine. In the Precision Mode window that
appears, move the slider to set the precision that you toggle into. For
example, if you assign Precision Mode to a pen button, when you press the pen
button, you switch to working in the precision that you selected from the
slider. When you press the pen button again, you switch back to working in the
normal precision. Press “Esc” or press the pen button for the third time to
exit Precision Mode.
Pan/Scroll| This function allows you to pan and scroll in a document or item
by moving the pen tip up and down or right and left.When you select
Pan/Scroll, the Scroll Speed window appears. Move the slider to your preferred
scrolling speed.
Quick Menu| Pick it up and you can use the key to pull up the Quick Menu.
Detailed information for reference is down below this table.
Fixed Pressure Sensitivity| You can lock the pressure at the current level
until you release the component. For example, if you assign this setting to a
pen button, you can paint
with pressure sensitivity enabled in your application until you reach the
brush size you like. Then, press and hold the pen button to lock in that brush
size as long as you are pressing and holding the button.
None| When select None, the keys will not work.
Note: The pictures are for reference only.
The specific settings of the Quick Menu are as follows:
Click Customize in the picture above to call out a quick menu (see picture 1). For each of the six buttons on the left, users can enter a name for it and set unique function for it. After that, users can call up the Quick Menu by pressing the key (see picture 2). The menu disappears after a click on any of the six buttons. By clicking “Fix” once the menu will be fixed on the desktop while after a second try the “Fix” button changes to “Close” and the menu disappears (see picture 3). Put the cursor on the menu to drag it.
Picture 1
Picture 2
Picture 3
2. Pen Nib Activity
The pen nib of the digital pen can be set as Valid/Invalid according to users’
needs. Click the drop-down button to set its activity. In Valid mode, the pen
works well, and in Invalid mode, the pen has a cursor movement, but cannot
complete specified actions.
3. Enable Windows ink
Microsoft Windows provides extensive support for pen input. Pen features are
supported in such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC,
SketchBook 6 and so on.
4. Pressure Sensitivity Adjustment
Users can adjust the pressure sensitivity level by dragging the slider in the
Pressure Sensitivity Adjustment box according to your usage habits. Click the
redo button at the top right to revert to the default pressure.
- To decide the force required for a pen to produce a click or a pressure sensation.
- You can change the slope of the pressure response curve.
- To determine how much pressure needs to be applied to the pen nib to reach the highest pressure sensitivity level.
Draw lines in the Pressure Test box with the pen, and the bar on the right will simultaneously show the pressure changes on the pen nib. Click the “Delete” button above to remove the lines, reset the pressure sensitivity level and test it until you find the appropriate pressure sensitivity level.
A steep curve means a more sensitive response.
Driver Setting
1. Device
Here you can view the product and firmware information.
2. Backup
The driver can import and export your custom settings, which helps to avoid
repeated settings when launching a different device. Default settings mean
that all the settings on current device are covered and the default settings
are restored.
3. General Setting
Language: Click the drop-down button to select a language.
Color: You can select the color of the Driver interface among Dark, Blue, and
Light according to your preference.
Start Menu: Click to enable or disable “Auto-Start”, “New Message Alert”,
“Automatic Updates”, “Low Battery Warning”.
Hotkey: You can set a hotkey to call out the Driver interface quickly
according to your usage habits.
4. About
Users can check the Driver version here. Click “Check for Updates” to find the
latest Driver version and then follow the prompts to update the Driver if
needed.
Click “Feedback” to send a feedback email if you have any question about the
driver; Click “Uninstall” to delete the current driver.
If you can’t click or draw or there is no pressure sensitivity under the
software, click “Software Diagnosis” to find out cause. For specific
operation, Please click
here.
How to Use the Digital Pen
Hold the Pen:
Hold the digital pen as you hold a real pen. Adjust your grip so that you can
toggle the pen press keys easily with your thumb or index finger. Be careful
not to accidentally press the key while drawing with the pen.
Note: Please place the pen on the table when it is not in use. Do not put
the pen on the pen computer, otherwise it may interfere with the function of
the mouse and other devices, and it may also prevent your computer from
entering sleep mode.
Cursor Movement:
Move the pen slightly above the working area of the pen computer without
touching the surface of the pen computer, and the cursor on the screen will
move to the new position accordingly.
Click:
Tap on the working area of the pen computer with the pen to register a click.
Press lightly to highlight or select an item on the screen and double-click to
open it.
Move:
Pick up a file or icon, then slide the pen nib across the display to move it.
Use the Pen Press Keys:
There are two press keys on the digital pen. Their functions can be programmed
in the driver.
The pen press keys will work as long as the vertical distance between the pen
nib and the pen computer is within the sensing height(10mm).
Replace the Pen Nib:
Tip: When the pen nib is badly worn, please replace it with a new pen nib
timely.
- Unscrew the top of the pen case counterclockwise to open it
- Take out a replacement nib
- Pull and open the pen case
- Tilt the pen, and pull the nib out of the pen through the nib clip
- Insert the replacement nib straight into the barrel of the pen until the nib stops moving forward
Troubleshooting Solutions
Pen Computer Troubleshooting
| Problems | Solutions |
|---|---|
| There is no picture on the screen | Check whether the power has been turned |
on and whether the indicator light is on.
The pen touch does not respond| 1. Check whether the driver has been
successfully installed. Try to reinstall the driver and restart.
2. Check whether the digital pen nib is set as “enabled”. If not, please
reset it as “enabled”.
It takes too long for the pen touch to
respond| 1. The CPU is occupied by programs or too many processes are
running. Try to close applications
which are not used temporarily.
2. There is debris on the screen which affects the operation. Try to clean
the screen of the pen computer.
Color deviation| As color temperature varies for different areas, tiny color
deviation is a normal phenomenon.
Image dithering or ripple| Check whether there is any electronic device
nearby that interferes with the pen computer.
Image blur| Please set the screen resolution to the default setting.
The pen computer cannot sense the pen pressure while the cursor can move| 1.
If the driver is damaged or incorrectly installed, please uninstall the driver
and reinstall.
2. Try to restart your computer.
The digital pen does not work.| 1. Make sure you are using the pen that
originally came with the pen computer.
2. Make sure you installed the driver correctly.
The press key does not work.| 1. Check whether the press key function in the
driver is enabled.
2. Check whether the function of the press key is set correctly.
The computer cannot enter sleep mode.| Please do not place the digital pen on
the working area of the pen computer when you are not using it, otherwise
your computer will not be able to enter sleep mode.
The press key of the digital pen does not work.| The press keys of the
digital pen will not work when the vertical distance between the pen nib and
the working area or the surface of the working area of the pen computer is
over 10mm.
The cursor has an error.| Recalibrate
References
- Download Drivers And User Manual - Huion
- TCPDF
- Support : HUION
- How to fix no pen pressure or not clicking or drawingWindows : HUION
- Download Drivers And User Manual - Huion
- huion.com/index.php?m=content&c=index&a=manual&id=749
- huion.com/index.php?m=content&c=index&a=manual&id=750
- huion.com/index.php?m=content&c=index&a=manual&id=751