XVX M87 Coral Sea Themed Mechanical Keyboard User Manual
- June 11, 2024
- xvx
Table of Contents
- Introduction
- RGB Backlit Modes
- XVX Gaming Interaction Mode
- Multimedia Function
- Package Contents
- Features:
- Installation, Connection and Use
- Bulld the connection between the USB receiver and keyboard
- Charge the keyboard
- Troubleshooting Tips
- Pro software download link
- Standard layer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XVX M87 Coral Sea Themed Mechanical Keyboard User Manual
Introduction
Thank you for choosing Mechanical Rechargeable Keyboard. For the best results, please read the user manual carefully before using this product.
RGB Backlit Modes
XVX Gaming Interaction Mode
Note: The lighting of the 4 preset game modes can be recorded.
- Recording steps:
Set the individual keys first, then adjust to the color (red, orange, yellow, green, blue, purple, white, pink).
After entering any game mode, press FN+HOME to start recording, the key has no output function at this time, the indicator light flashes, click the key to be recorded, adjust the light color. To finish recording, press FN+HOME to finish recording .
Multimedia Function
Package Contents
1 x Mechanical Rechargeable Keyboard
1 x USB Nano Receiver
1 x Type-( Cable
1 x User Manual
1 x Keycap Puller
1 x Switch Puller
Features:
- TKL Mechanical keyboard
- 2.4G Wireless + Wired dual modes
- Rechargeable battery: 3000 mA
- RGB backlit, 19 kinds of lighting modes
- USB Full Speed 2.0 (12Mbps)
- N-key rollover
Installation, Connection and Use
-
Wired mode
Toggle the switch to the left (the color card shows red) for wired mode Connect the USB charging cable to your computer. -
2.4G Wireless mode
Charge the battery. Toggle the switch to the right (the color card shows green) for wireless mode Plug the USB nano receiver into the USB port of your computer.
Once the computer recognize the keyboard, you’re ready to use.
In 2.4G Wireless mode, If not use for more than 60 seconds, the RGB backlit will turn off automatically and keyboard enter power-saving mode. It is better tum off the keyboard when not use for long time.
Bulld the connection between the USB receiver and keyboard
Toggle the power switch to the right (the color card shows green), press FN+P for 5 seconds, now the key “P” is flashing. Plug the USB nano receiver into the USB port of your computer. Key “P” stop flashing after building connection successfully.
Charge the keyboard
The battery should be charged for at least 6~8 hours before being
used for the first time.
When the battery is low, the FN key red light flashes. Connect the USB
charging cable to your computer or adapter. The charging indicator is located
on the left side of the space bar, the charging status lights up, and it turns
off when fully charged. (charging time: around 6~8 hours).
NOTE: If you want to use the keyboard when charging, you should choose wired
mode, the power switch must be toggled to the left position.
Troubleshooting Tips
If you experience problems while using the keyboard, here are some helpful
troubleshooting tips:
Check the battery is charged
Check the receiver is property connected to the USB port
Try reducing the distance between the keyboard and the computer
Remove any large metal objects located between the keyboard and the computer
that could interrupt the signal
Product picture are for reference only.
Pro software download link
- Please note the macro software is only available for Windows PC at this time.
- The software can only be used in wire mode.
Standard layer
Instagram
Facebookwww.XVXCHANNEL.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>