JMMO K201 Bluetooth Scissor Keypad Instructions
- June 4, 2024
- jmmo
Table of Contents
JMMO K201 Bluetooth Scissor Keypad
Content list
- Content list
- Keyboard xl
- USB cable xl
- instructions manual xl
SPECIFICATION
- Switch: Bluetooth scissor keypad
- Battery: 300mAh
- Charging time: About 2 hours
- Charging port: USB Type-C
- Mode: Bluetooth 5.0
- Bluetooth working distance: Maximum !Om (open space)
- Bluetooth device name: K201
- Weight: 383 (±20g)
- Size: 28212515mm
Functional specification
| |
---|---|---
function| Led function| Performance state
charge
|
Charging indicator
| Full cl1arg1:-Green liglil
In the charging-red light
Low battery-Red light flashing
Bluetooth
|
Bluetooth channel indicator light
| Slow flashing-pair
flashi11g light -Switching/ loop back
The light goes out-Connection successful
| |
Keyboard overview
- Bluetooth channel indicator light-1
- Bluetooth channel indicator light- 2
- Bluetooth channel indicator llght- 3/caps lock green light
- charge lamp
- USB- C interface
- power switch
Charge
Plug the charging cable into the USB port of the device and the other end into
the type-C port of the keyboard Insert the charging cable into the USB port of
the device, and the other end into the type-C port of the keyboard. The
charging indicator light: when the battery power is lower than 15%, the
charging indicator red light flashes. During charging, the charging indicator
red light is on for a long time, and the full green light is on for a long
time The K81 keyboard can be charged in two modes: Bluetooth on / Bluetooth
off
This product supports up to SV charging. We are not responsible for charging
problems caused by improper human operation.
Bluetooth operation
- When the keyboard switch is turned to the on position, the keyboard will directly enter the code matching state (by default, Bluetooth channel 1 enters the code matching state), and the blue light of Bluetooth channel indicator – light 1 enters the slow flashing state, indicating that it enters the code matching state.
- Search for the Bluetooth device “K.201” on your device and connect it (the Bluetooth channel indicator turns off after successful pairing).
Careful: this keyboard supports pairing up to 3 devices through the combination keys “FN +Fl” / “FN + F2” / “FN + F3”. Due to many Bluetooth versions and other reasons, the initial connection may have problems such as slow connection or connection failure. Please be patient to check whether the device settings are correct.
Swich Bluetooth device
Press the combination key “FN +Fl”/” FN +F2 “/” FN +F3 “to switch to
another device.
The switchover may be delayed due to frequent switchover or excessive
switchover speed. In this case, please wait patiently or try again.
Reconnection
- After the keyboard is turned on, the keyboard automatically enters the connection state and connects to the previously connected device.
- lf the keyboard is successfully connected, the Bluetooth indicator stays on for 3 seconds and then goes off.
- lf the keyboard connection fails, the Bluetooth indicator blinks and goes off. At this time, press any key to enter the connection state again.
- You can hold down “Fn +Fl, “Fn +F2″, or .. Fn +F3” to stop the connection and forcibly enter the pairing state. At this time, the Bluetooth indicator blinks slowly.
caution
Do not place this product, its acessories and package parts in reach of
children to prevent accidental suffocation. Please keep the product dry to
avoid corrosion.
Do not expose the product to extreme temperatures below-10″ C (S”F} or above
500 C (131″F) to maintain the life of the keyboard or battery.
ture off keyboard
When the toggle switch is turned to off, the keyboard is turned off, but it
can be charged normally.
factory reset
Restore the factory mode and long press the “FN + j + Z” combination key for
35. At this time, all Bluetooth channel indicators and Charging Indicators on
the keyboard flash 3 times, and the keyboard will restore the factory setting;
After the keyboard is restored to the factory setting, it will automatically
enter the code matching state of the first Bluetooth channel.
Power saving mode
In the Bluetooth state, the keyboard will automatically enter the sleep
mode after 10 minutes of no operation. Click any key to wake up the keyboard.
When the power is less than 15%, the charging indicator flashes red, please
charge in time.
Fn Combination Key function
Q &A
Q: I can’t pair the keyboard with my device.
A: Firstly, make sure that the device you are pairing with is Bluetooth
enabled. Then reboot the device and try pairing with the keyboard again.
Caution: On a Windows computer. New Bluetooth connections sometimes
require additional software updates – a process that may still be ongoing
after a message appears indicating successful completion.
Wait at least 20 minutes after pairing to make sure all updates are complete
before rebooting your computer.
Make sure that the device accepts Bluetooth connectivity {Windows) and
supports an external keyboard (HID profile). Search and open the “Bluetooth
device” window> Open Bluetooth Settings, then select the following check box:
- Allow Bluetooth devices to locate the computer
- Allow Bluetooth devices to connect to this computer
- Alert me when a Bluetooth device wants to connect
Q: My keyboard doesn’t work.
A: Turn off then turn on the keyboard.Turn off Bluetooth and reboot your
computer.
About the device:Go to Bluetooth Settings and tum off Bluetooth and “forget”
the keyboard.Reboot the device and turn on Bluetooth to reconnect.
Q: Serious interference and delay in Bluetooth connection within 10
meters.
A: Check if the keyboard is on a metal surface, that might interfere with
Bluetooth signals. If there are too many obstacles between the mouse and the
device .
Q: Third-party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers windows/macOS,
functionalities of third Party input tools may be affected while using the
keyboard. Please make sure your operating system and drivers are up to date.
Q: Some FN keys or multimedia keys do not work in Windows/Android mode.
A: Due to Windows/Android compatibility, versions, brands, and
drivers,some simple multimedia features may not be available.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation
is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.