TAGA Platinum F-120 v.3 Floor Standing Speaker Instruction Manual

TAGA Platinum F-120 v.3 Floor Standing Speaker Instruction Manual

Floorstanding Speaker Feet and Spikes -Installation Manual

The TSF-001 feet and spikes may be supplied with your speaker or separately.

For new speakers- before unpacking! To prevent damage to the speaker

choose one of the below installation options:

A1 – packaging opened from the bottom, install the feet and spikes, while the speaker is still in the carton. Place the carton with the speaker on the floor in the vertical (upside down) or horizontal position, open it from the bottom and remove the protective bag to uncover its bottom.
A2 – packaging opened from the side, take out the speaker from the carton without removing it from the protective bag. Place the speaker securely on a stable surface in a horizontal position above the floor level. Remove the protective bag from the bottom of the speaker.

Two options for your choice:

I. To install feet and spikes or;
II. To install the spikes only.
TAGA Harmony recommends the first option.
Note! The actual speaker shape can vary from the ones shown in the figures.

Content (set for 1 piece of speaker):

FEET and SPIKES

Required tool (not supplied with this product) cross screwdriver

Attach the spikes and the top pads to all 4 feet as shown in the figure.

Attach the feet. Using 2 screws (D) screw in each foot securely into the threaded sockets located at
the bottom side of the speaker as shown in the figure (place the speaker in Al or A2 position).

SPIKES only

[EN]lnstall the spikes (C). Screw in the spikes into the threaded sockets located at the bottom side of the speaker
as shown in the figure (place the speaker in Al or A2 position).
The outer sockets are recommended for better speaker stability.

EU declaration of conformity

Your product is marked with the symbol shown on the left.
As its manufacturer, hereby we declare that the product is in compliance with the following EU directives and regulations:
CE: 2014/30/EU (EMC) & 2015/863/EU (RoHS)
The full text of the EU declaration of conformity is available from the manufacturer. .
Disposal of the product

Disposal of old electrical & electronic equipment
This symbol on the product or on its literature and packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local government office, your household waste disposal service or the shop where you purchased the product.

Read More About This Manual & Download PDF:

References

• Home - TAGA Harmony

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>