Retro Sound 1966-67 Dodge Charger Redondo RS Radio Instruction Manual
- June 9, 2024
- Retro Sound
Table of Contents
Retro Sound 1966-67 Dodge Charger Redondo RS Radio
What’s in the Box
Control Shaft
Hardware
Installation
Attach each InfiniMount Bracket to the Radio Motor with the eight small screws
Place a Shaft Nut and Shaft Washer onto each Control Shaft before inserting them into the InfiniMount Brackets. The Control Shaft depth and height can be adjusted as needed.
To complete the installation secure each Control Shaft with a Shaft Nut and Shaft Washer then plug each shaft into the side of the Radio Motor. Use the optional hardware if needed to help mount the radio to the dash.
Control Layout
Radio Presets
Setting Radio Presets
To set a preset, tune to the station you want to set the preset to, and then
press and hold the desired Preset Button(5) for two seconds.
Recalling Radio Presets
To recall a preset, simply press the Preset Button(5) your station was set to
previously
Basic Operation
Power On/Off
Press the Left-Front Knob(1) to power the unit on.
Press and hold the Left-Front Knob(1) to power the unit off.
Volume
Rotate the Left-Front Knob(1) to change the volume.
Changing Source Modes
Rotate the Left-Rear Knob(2) clockwise to cycle through the source modes.
Changing Radio Bands
Rotate the Right-Rear Knob(4) counter-clockwise to cycle through the radio
bands.
Tune
Rotate the Right-Front Knob(3) to scroll through the stations.
Mute On/Off
Press the Right-Front Knob(3) to mute and unmute.
Equalizer (EQ)
Press the Left-Front Knob(1) to enter the Tone Control sub-menu. Press and
release the LeftFront Knob(1) until you see the EQ setting you’d like to
adjust. Rotate the Left-Front Knob(1) to adjust the setting. Press the Left-
Front Knob(1) to move to the next item, and repeat to adjust each option. Let
the unit time out to set.
Setting the Clock
Press and hold the Right-Front Knob(3) to enter the System Settings sub-menu.
Rotate the Right-Front Knob(3) to cycle through the choices until you see CLK,
then press the RightFront Knob(3) to select. Rotate the Right-Front Knob(3) to
adjust the hours. Then press the Right-Front Knob(3) again to move on to
minutes. Rotate the Right-Front Knob(3) to adjust the minutes. Let the unit
time out to set.
**Display Color*
Press and hold the Right-Front Knob(3) to enter the System Settings sub-menu.
Rotate the Right-Front Knob(3) to cycle through the choices until you see
SCAN, then press the Right Front Knob(3) to cycle through the colors. Let the
unit time out to set.
Beep On/Off
** Press and hold the Right-Front Knob(3) to enter the System Settings sub-
menu. Rotate the Right-Front Knob(3) to cycle through the choices until you
see BEEP ON/OFF, then press the Right-Front Knob(3) to choose between BEEP ON
or BEEP OFF. Let the unit time out to set
*Some features are not available on all radios.
Modern Sound For Your Classic
[email protected] |
help.retromanufacturing.com
