REMINGTON PG6030 Personal Groomer User Manual
- June 9, 2024
- Remington
Table of Contents
REMINGTON PG6030 Personal Groomer
The Personal Groomer PG6030 is a grooming tool that includes several attachments to help you achieve your desired look. It is important to read the instructions carefully and keep them safe. Remove all packaging before use.
Important Safeguards
Persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge should be supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years.
Key Features
- On/off switch
- Groomer
- Wide trimmer
- Detail trimmer
- Mini foil shaver
- Nose, ear, eyebrow trimmer
- Attachment guide combs
- Charging indicator
- Stand
- Adaptor (not shown)
Getting Started
The groomer needs to be charged for 14-16 hours before first use.
To Trim a Beard/Moustache
Use the groomer with the wide trimmer attachment against your skin, use slow movements to create a beard/moustache line.
To Trim Sideburns
Use the groomer with the detail trimmer attachment to trim sideburns to your desired length. Use well-controlled movements to trim hair.
To Trim Nose, Ear or Eyebrow Hair
Use the groomer with the nose, ear, eyebrow trimmer attachment to remove hair from these areas. For eyebrows, use the attachment guide combs and select the desired length. Lift the hairs up with the comb and trim them with the groomer. Your finger should be covering the roots of the hairs you are lifting to prevent accidental removal by trimmer.
Tips for Best Results
Experiment with different trimming positions (i.e. upwards, downwards, or across) for better results.
Attaching and Removing the Trimmer Attachments
- Note: Always ensure the groomer is switched off before changing any attachments.
- To remove, hold the groomer with one hand and turn the trimmer head anti-clockwise with the other.
- To attach, hold the groomer with one hand and turn the trimmer head clockwise with the other.
Care for Your Groomer
To replace batteries, remove the battery cover and expose the batteries. Dispose of batteries safely and appropriately. Do not dispose of batteries with unsorted municipal waste.
Adapter Specifications
- Manufacturer address and registration number: Spectrum Brands (UK) Limited, Regent Mill, Fir Street, Failsworth, Manchester M35 0HS Company number: 02394603
- Adapter model number: PA-0401U
- Input voltage: 100 – 240 V~
- Input AC frequency: 50/60Hz
- Output voltage: 4.0 V D
- Output current: 0.1 A
- Output power: 0.4 W
- Average active efficiency: 36.0%
- Efficiency at 10% No load power consumption: 0.1W
Recycling
To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.
Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use.
IMPORTANT SAFEGUARDS
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years.
-
Do not use the product with a damaged cord. A replacement can be obtained via our International Service Centres.
Do not immerse the appliance in liquid; do not use it near water in a bath- tub, basin or other vessel; and don’t use it outdoors. -
Make sure the power plug and cord do not get wet.
-
An appliance should never be left unattended when plugged into a power
outlet, except when charging. -
Do not use this product if it is not working correctly, if it has been dropped or damaged, or dropped in water.
-
Do not plug or unplug the appliance with wet hands.
-
Do not twist or kink the cable, or wrap it round the appliance.
-
Do not use attachments other than those we supply.
-
Always remember to turn on the groomer before you insert it into your nose or ear to avoid injury.
-
This appliance is not intended for commercial or salon use.
KEY FEATURES
- On/off switch
- Groomer
- Wide trimmer
- Detail trimmer
- Minifoil shaver
- Nose, ear, eyebrow trimmer
- Attachment guide combs
- Charging indicator
- Stand
- Adaptor (not shown)
GETTING STARTED
CHARGING YOUR APPLIANCE
- Before using your groomer for the first time, charge for 14-16 hours.
- Ensure the product is switched off.
- Place your groomer into the stand, connect the adaptor to the product and then to the mains.
- The charging indicator will illuminate.
- The charging indicator will remain illuminated once fully charged.
- Your appliance cannot be overcharged. However, if the product is not going to be used for an extended period of time (2-3 months), unplug it from the mains and store.
- Fully recharge your appliance for 16 hours when you would like to use it again.
- To preserve the life of your batteries, let them run out every 6 months then recharge for 14-16 hours.
INSTRUCTIONS FOR USE
ATTACHING AND REMOVING GUIDE COMBS
-
To attach:
With the trimmer blade facing away from you, slide the guide comb on top of the trimmer blade and click into position. -
To remove:
With the trimmer blade facing away from you, carefully push the guide comb away from the trimmer blade.
BEFORE YOU BEGIN
- Comb facial hair with a fine comb before you start trimming.
- Hairs should be dry and without any waxes or lotions before using the groomer.
TO THIN AND TAPER THE BEARD/MOUSTACHE
- Attach the wide trimmer blade.
- Place the hair length attachment on the trimmer blade, select the desired length and switch on.
- Start trimming under the chin, following the jawbone line. Work toward the ear and upper beard line using an upward motion.
TO TRIM EDGE OF BEARD OR MOUSTACHE
- Attach the wide trimmer blade.
- Hold the groomer with the cutting blade facing you.
- Start with edge of beard/moustache line, and with the cutting blades resting lightly against your skin, use slow movements to create a beard/moustache line.
TO TRIM SIDEBURNS
- Hold the groomer with the cutting blade facing you.
- Use a small comb to lift the hairs. Hold the comb at the desired beard or moustache length.
- Move the groomer along the comb to cut the hairs. Use light pressure and well-controlled movements to trim hair.
TRIMMING THE NAPE OF YOUR NECK
- Attach the wide trimmer blade.
- Use your fingers to lift the hair at the base of your head up off the neck. Your index finger should be covering the roots of the hairs you are lifting to prevent accidental removal by trimmer.
- Using your other hand, hold the trimmer to the base of your neck with the cutting unit facing up, and move the trimmer up the length of the neck until it touches your finger covering the hair roots at the base of your head.
- Be sure to move the unit slowly when performing this operation and to keep the hair roots at the base of your head out of the way of the trimmer.
TO REMOVE HAIR FROM NOSE AND EAR
- Attach the nose, ear, eyebrow attachment.
- Insert the groomer’s cutting unit gently into the nostril or ear.
- Gently move the groomer in and out of the nostril or ear and at the same time rotate the groomer.
- Avoid inserting the cutting unit more than 6mm into your nostril.
TO REMOVE HAIR FROM EYEBROWS
- Attach the nose, ear, eyebrow attachment.
- Gently guide the cutting unit to stray, unwanted hairs along the eyebrow line or protruding from the eyebrow itself.
- To remove the hairs completely lower onto the skin and move over desired area.
TIPS FOR BEST RESULTS
- Comb your hair in the direction that it grows so that the hairs are at their maximum height and facing in the same direction.
- Since all hairs do not grow in the same direction, you may want to try different trimming positions (i.e. upwards, downwards or across) for better results.
ATTACHING AND REMOVING THE TRIMMER ATTACHMENTS
Note : Always ensure the groomer is switched off before changing any attachments.
- To remove, hold the groomer with one hand and turn the trimmer head anti-clockwise with the other.
- To attach, hold the groomer with one hand and turn the trimmer head clockwise with the other.
USING THE DETAIL ATTACHMENT
- Hold the groomer with the surface (back side) of the blade guides against the skin.
- Use motions similar to using a wet blade to provide the closest trim.
- Note: This attachment provides a dual purpose solution for stubble or close results without irritation.
- Attach the comb to the detail trimmer making sure to keep the adjustable guard orientated to the large cutting teeth, while covering the small cutting teeth.
- Once guard is in place, you can adjust the height of cut by using the thumb adjustment button on the comb.
USING THE MINI FOIL SHAVER
- Hold the groomer so the mini foil shaver gently touches your face.
- Use short, well-controlled movements to shave around your beard/moustache. Use your free hand to stretch your skin. This encourages the hair to stand upright making it easier to shave.
- Note: The mini foil shaver was designed to shave the detail areas around your beard/ moustache/sideburns. It was not designed to shave your entire face. For a close comfortable shave, guaranteed, use one of Remington’s electric shavers.
CARE FOR YOUR GROOMER
- Care for your product to ensure a long lasting performance. We recommend that you clean your groomer after each use.
- The easiest and the most hygienic way to clean the groomer is by rinsing the product head after use with warm water.
AFTER EACH USE
- Rinse the accumulated hair from the cutters and shake off excess water, alternatively, use a small soft brush.
- Gently tap on a flat surface to remove hair particles, and brush the remaining hairs away.
- Place one or two drops of cutter oil or sewing machine oil on the blades.
- Turn the clipper on to distribute the oil evenly, wipe off any excess oil.
- Wipe the main unit with a damp cloth and dry immediately.
BATTERY REMOVAL
- The battery must be removed from the appliance before it is scrapped.
- The appliance must be disconnected from the supply mains when removing the battery.
- Unplug groomer from the outlet to avoid risk of electrical shock.
- Pry the upper housing from the product with a flat head screwdriver. This will expose the batteries.
- Using wire cutters, clip the wires leading to the batteries.
- The battery is to be disposed of safely.
ADAPTER SPECIFICATIONS
Manufacturer address and registration number| Spectrum Brands (UK) Limited, Regent Mill, Fir Street, Failsworth, Manchester M35 0HS
Company number: 02394603
---|---
Adapter model number| PA-0401U
Input voltage| 100 – 240 V~
Input AC Frequency| 50/60Hz
Output voltage| 4.0 V D
Output current| 0.1 A
Output power| 0.4 W
Average active efficiency| ≥36.0%
Efficiency at 10%| –
No load power consumption| ≤0.1W
RECYCLING
To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/ collection point.
Ref. No. PG6030
Type No. PG6030
100-240В~50/60Гц 30mA 22/INT/ PG6030 T22-7002851 Version 06 /22
Remington® is a Registered Trade Mark of Spectrum Brands,Inc., or one of its
subsidiaries
Russell Hobbs Deutschland GmbH, Am Unisyspark 1, 65843 Sulzbach, Germany
remington-europe.com
© 2022 Spectrum Brands, Inc.
remington-europe.com