gemmac MoonLight Sensor Light Bluetooth Speaker User Manual

Moon Light Sensor Light
Bluetooth Speaker
User Manual

Moon Light Sensor Light Bluetooth Speaker

• Please read and keep the user manual carefully

Product Description

Function Key Description

Power Button:

1. Long press to turn on the device, the Bluetooth icon will lash. Chaise the BT name( MOON SPEAKER) to establish connection , then the BT icon will stay soli.
   Long press again to turn often device.
   Note: If Bluetooth is not connected, the BT ican will turn off after S mins. Please double-click the main button to turn on BT again.
   “After connecting to 2 Bluetooth device, double-click the main button to disconnect, and double-click again to reconnect.

2. After turning on the device:
   15t touch at 30% brightness.
   2nd touch at T0% brightness
   3rd touch at 100% brightness.
   4th touch at breathing light mode
   Seth touch to turn off light. You can also wave hands behind the light to turn off.

Clock Button:
Long press the clock button fr 12 seconds to entry the clock setting mode.
When thescreen numbers blinking,, pass the clock button once to switch between setting the hour and minute, and us the +or – button to adjust the time, After setting th time, Walt 5 seconds argon press the clock button again to confirm the stein,
Alarm Button:
Long pass or 1-2secands o enter the alarm setting mode.
When the sreen numbers banking, press the alarm button once to switch between setting the hour and minute, and use the + o – button to adjust the time. Afar setting the time, wait 5 seconds or long presser alarm button again toconfinm th stein.
1Fyou want cancel the alarm setting, double-click the alarm button to cancel, and double-cick again 1o set thalarm again
When the alarm goes o, press any button to top it
Note: “After the alarm goes of, the warm white light will automatically turn on. You can wave you hand over the sensing aea to turn off th alarm. f you don’t tun of the alarm within 5 minutes, the warm white light il urn offautomaically long with the lark.
+and – Button:
Long press the + or – button to adjust the volume, Shortgrass the
+ or – button to switch between the previous of net track
Long press the + and – button to switch between Chinese and English voice.

Bluetooth Music Playin

After powering on, select the Bluetooth device “MOON SPEAKER for pairing on your phone, After successful pairing, a connection prompt sound will be heard, indicating that the BT connection has been established successfully and you can play music as usual

Wireless Charging Function

To activate the wireless charging function, the standard cable needs to be inserted into the machine and the other end needs to be inserted into the power adaptor (not included, recommend 9v23 to generate maximum 15W charging efliciency). The phone needs to be placed upright on the holder. (This wireless charging is compatible with most mainstream phones that have wireless charging function on the market. Charging efficiency may vary due to differences in phone size and coil positions.

Troubleshooting,

• Failed pairing after multiple attempts
  Turn off both the speaker and the phane, then restart them and make sure the connection name s
  MOON SPEAKER”

• Music playback with intermittent interruptions
  a. Check if the connection distance is beyond range or f there are obstacles between the speaker and phone;
  b. Check if the phone network is smooth, and f the speaker has low battery.

• No sound during playback
  Check f the speaker volume is et to the minimum (press and hold the plus or minus button to adjust the volume).

• Cannot power on
  Check f the speaker has power. Pug in the USB charging cable, charge for 2 hours and try again. Product Reset
  When turn on, press and hold the power button for 8 seconds to restore to factory setting

Product charging instruction

• No sound during playback
  Check if the speaker volume is set to the minimum (press and hold the plus or minus button to adjust the volume).

• Cannot power on
  Check if the speaker has power. Plug in the USB charging cable, charge for 2 hours and try again. Product Reset When turn on, press and hold the power button for 8 seconds to restore to factory setting.

Product charging instruction

a. Please use the standard USB cable connecting to your power adapter for charging.
b. When the battery is low or insufficient, please charge it as soon as possible.
c. Do not use this device in high temperature or high-pressure environments.
d. It is recommended to charge the device once a month if it is not used for a long time to ensure that the battery is fully charged and the device is working properly when needed.

Products parameters

Product name – Moonlight Sensor Light Bluetooth sparks
Product Size : 168X206X110mm
Package Size : 150X218X152mm
Product Weight: 280g
Wireless Charging Power: 15W
Wireless Charging Voltage : 5V-9V
Input Voltage: 5V-2A
Frequency Response : 80HZ-20KHZ
Model : Y06
Battery Capacity : 1000mAh
Usage Time : 4-6h
Charging Time : 2-3h
Output Power: 5W
Reception Distance: -COM
BT Version : 5.0

Accessories included

FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoc on dictions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be insta lied and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>