SUNPOLLO 2 in 1 Electric Air Duster and Vacuum User Manual

SUNPOLLO 2 in 1 Electric Air Duster and Vacuum

Product Information

Electric Air Duster & Vacuum 2 in 1

The Electric Air Duster & Vacuum 2 in 1 comes with an air duster nozzle, blower nozzle, vacuum nozzle, brush, and user manual. It also includes a USB cable for charging purposes. The device has a filter that can be easily removed and cleaned for efficient and continuous use.

Product Usage Instructions

Step 1: To use the vacuum function, attach the vacuum nozzle to the device.

Step 2: Turn on the device by pressing the button once.

Step 3: Point the nozzle to the area you want to clean and start vacuuming.

Step 4: To use the air duster function, attach the air duster nozzle or blower nozzle to the device.

Step 5: Turn on the device by pressing the button once.

Step 6: Point the nozzle to the area you want to clean and start blowing air.

Step 7: To clean the filter, follow these steps:

1. Turn off and unplug the device.
2. Remove the cover of the device.
3. Take out the filter and clean it with water or a brush.
4. Dry the filter completely before putting it back in the device.
5. Put the cover back on and start using the device again.

Note: During use, double-clicking the button will turn off/on the light. For any queries or support, contact KINDPMA888@outlook.com

Electric Air Duster & Vacuum 2 in 1 User Manual
Please read this instruction manual carefully before using the product, and keep it for future reference.

What is in the box?

• Electric Air Duster*1
• Blower Nozzle*5
• User Manual*1
• USB Cable*1
• Vacuum Nozzle*3
• Brush*3

Air Duster Nozzle

Nozzle 1: For camera lens/jewelry/phone handset charging port and other items
Nozzle2: For swimming ring/beach ball/yoga ball inflation; Air blowing on barbecue charcoal
Nozzle 3: For PVC swimming pools and inflatable beds, etc.
Nozzle 4: For blowing the dust off the computer host, keyboard, etc.
Brush nozzle 5: Clean up static or thick dust adhesions

How To Use The Air Duster Function
It can be used after installing the air nozzle. (nozzle 1-nozzle 5)

Vacuum Cleaner Nozzle

Vac nozzle 1: Vacuum the dust or debris
Vac nozzle 2: Use to vacuum dust, debris or hair
Vac brush: Use to vacuum static or thick dust adhesions(Used with Vac nozzle 1)

How To Use The Vacuum Function

1. Remove the cover.
2. Install the vacuum nozzle 2
3. It can also be used with vac nozzle 1 or vac brush.

How to Clean the Filter?

1. Twist to Detach Stainless Steel Filter and HEPA Filter.
2. Wash the Filters and Dust Cup with Little Brush.

Operate Instruction

1. Hold down the power button for 3 seconds to turn on the duster and set the speed to first gear.
2. Press the power button again to change to the second gear.
3. Press the power button for the third time to switch to the third gear.
4. Press the power button the fourth time, and change to standby mode. If you do not do anything in standby mode for one minute, it will automatically turn off.
5. Long press the power button to turn it off when it is in turn-on status.
6. During use, double-click the button to turn off the light, and double-click again to turn on the light.

Specifications

• Power Supply: DC 5V
• Input: 2A
• Charging Time: 3.5-4.5 H
• Battery Working Time (Fully charged): 20-30Min
• Working Temperature: 14°F~122°F(-10°C~50°C)
• Storage Temperature: -2°F~140°F(-10°C~60°C)
• Noise: <90dB
• Weight: 450-500g
• Product Dimensions: 160100 65mm

Notes

1. Because the product contains motor accessories, the motor in works of fast rotation, so there will be a slight noise when working is normal, please do not worry.
2. In order to protect the battery, the product cannot be started when charging. If you need to use it, you can pause charging and then use it.
3. Every time before using the product, it is recommended to be fully charged in order to get the maximum use time.
4. If not used for too long, in order to protect the life of the battery please fully charged and then stored it.
5. It is recommended to charge the product once every 3 months to avoid battery damage.
6. If there is a little heat when the product is working, it is normal please do not worry.
7. To protect the life of the product, please store the product in a dry place.
8. If the product has any problems, please feel free to contact us we will reply to your message within 24 hours, your satisfaction is our greatest reward. Our Email: KINDPMA888@outlook.com

Indicator Instruction

1. The red light flashes when charging.
2. The green light is always on when fully charged.
3. The green light is on when using.
4. The red light flashes when the battery is low.

Tips: To shorten the charging time, please connect the cable with a 5V/2A USB outlet, like a USB charger, cellphone adapter, etc., Some USB outlets might have insufficient output current, which will slow down the charging speed or even hinder the charging.

Note
When using the Pressurized air for air nozzle for air inflation, the air valve must be opened for rapid air inflation. As shown below:

Release the nozzle from the nozzle hole and put it to the air outlet.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>