POMP ELECTRIC R-EP001 Air Compressor Instructions
- June 9, 2024
- POMP ELECTRIC
Table of Contents
POMP ELECTRIC R-EP001 Air Compressor
Product Information
The product is an air compressor that can be used to inflate tires and other items. It comes with a plastic adapter and a plastic pin for inflating different types of items. The compressor has a size of 250x200mm.
Product Usage Instructions
When using the product
- To start, connect one end of the pump to the car lighter socket (Fig. 1).
- After use, remove from the socket.
To inflate the tires:
- Remove the cap or valve stem.
- Connect the pump adapter to the corresponding tire system with the locking lever facing up.
- Push the threaded part of the valve stem down (Fig.2-a).
- When the pump is properly installed, push the lever down to secure it properly (Fig.2-b).
To inflate other items:
- Use the plastic adapter provided.
- For balls, use the plastic pin provided with the pump.
USING
When using the product:
To start, connect one end of the pump to the car lighter socket (Fig. 1).
After use, remove from the socket.
To inflate the tires:
- Remove the cap or valve stem.
- Connect the pump adapter to the corresponding tire system with the locking lever facing up. Push the threaded part of the valve stem down (Fig.2-a).When the pump is properly installed, push the lever down to secure it properly (Fig.2-b).
To inflate other items:
- Use the plastic adapter provided.
- For balls, use the plastic pin provided with the pump.
Attention
- When using the pump, make sure that the car engine is not running. Supervision is always required during the inflation.
- Do not use the product on high pressure tires such as those used on large trucks, trailers or tractors. This pump is not properly designed for heavy duty commercial tires.
- Do not use the pump for more than 10 minutes at a time. Allow to cool for 5 minutes before re-inflating. In case of overheating, unplug the pump from the wall outlet and allow the pump to cool for 30 minutes. The pump must be manually unplugged to turn the unit off.
- Always use a gauge to check the pressure on tires and inflatables (balls, beach toys, air mattresses, rubber rafts etc.).
- There is no pressure indication on soft material objects. Be careful not to over-inflate them.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>