Powergi LC71 3 in 1 Wireless Charging Station User Manual

June 9, 2024
Powergi

Powergi LC71 3 in 1 Wireless Charging Station

Powergi LC71 3 in 1 Wireless Charging Station

Specification

Input: IDCSV,3A DC9V,3A
Output(Phone): SW/7.SW Charging distance: ~l0mm
Output(Apple Watch):3WConversion: ~72°/o
Output(Arpad’s): SW NW.: 315g
Frequency: Dimensions: 80 x 136 x l08mm1 115-205KHz(for Phone & Arpad’s ,for US) 110-205 MHz(for Phone & Arpad’s, for EU) 325KHz(for Apple Watch)

Charging Mode

Charging Mode

  1. Make sure the wireless charger dock connect to the power supply.
  2. Put the smartphone/Arpad’s/Apple Watch properly on the transmitter.

Notes

  1. Do not squeeze or collisions.
  2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
  3. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
  4. Do not place too close with magnetic stripe or chip card ( ID card, bank cards, etc.) to avoid magnetic failure.
  5. Please keep the distance at least 2,0cm between implantable medical devices ( pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
  6. To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.

The involved images are sketch maps, the final product as per the material subjects.
Includes: wireless charger, Power cable, user’s 1manual.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(l) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals