CASIO PX-765 Digital Piano User Guide

PX-765 Digital Piano
User Guide

PX-765 Digital Piano

Before using this Digital Piano for the first time, be sure to read the separate USER’S GUIDE to familiarize yourself with basic operations.
Company and product names used in this manual may be registered trademarks of others.

General Guide

CAUTION

• Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can suddenly close unexpectedly and pinch your fingers.

• The names shown here are always indicated in bold when they appear within the text of this manual.

FUNCTION Button
The FUNCTION button is used in combination with other buttons and keys.
To change a setting, hold down the FUNCTION button as you press the button or key that is assigned the setting you want to configure.

• When you press a key, the Digital Piano beeps to indicate the current setting.

• A long beep indicates that a setting is turned off.
  

• For details about operations and settings, see “Configuring Settings with the Keyboard” on page EN-19.

Auto Resume and Operation Lock
Your Digital Piano can be configured to save its current settings when power is turned off and restore them when turned back on again (Auto Resume). You can also lock its buttons to protect against operation errors (Operation Lock). For details, see “Parameter List” on pages EN-22 – EN-25.
About Music Score data
You can use a computer to download music score data from the CASIO Website. For more information, visit the URL below.
https://support.casio.com/global/en/emi/manual/PX-765/

Power Outlet

After you finish assembling the stand, turn on the Digital Piano. For details, see “Getting Ready” on page EN-31.
Turning Power On or Off

1. Press the (POWER) button to turn on Digital Piano power. • The power lamp lights and the Digital Piano powers up. The power up operation takes about 5 seconds.
2. To turn off the Digital Piano, hold down the  (POWER) button until the power lamp goes out.

• Pressing the (POWER) button to turn off power actually puts the Digital Piano into a standby state. Minute amounts of current continue to flow within the Digital Piano in the standby state. If you do not plan to use the Digital Piano for a long time or if there is a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.

Auto Power Off
This Digital Piano is designed to turn off automatically to avoid wasting power after no operation is performed for a preset amount of time. The Auto Power Off trigger time is about four hours.
• You also can use the procedure below to temporarily suspend Auto Power Off.

■ To disable Auto Power Off

1. While the Digital Piano is turned on, press the (POWER) button to turn it off.
2. While holding down the FUNCTION button, press the P (POWER) button to turn on the Digital Piano. • Auto Power Off will be disabled at this time.

• Turning off the Digital Piano after performing the above steps will re- enable Auto Power Off.

Returning the Digital Piano to Its Factory Default Settings
Perform the following procedure when you want to return the Digital Piano’s stored data and settings to their initial factory defaults.

1. Turn off the Digital Piano.

2. Holding down the FUNCTION, MIDI REC and E.PIANO 1 buttons, press the (POWER) button.

3. Hold down the FUNCTION, MIDI REC and E.PIANO 1 buttons until the E.PIANO 1 lamp, and then the GRAND PIANO lamp, and then the R lamp start to flash.
   • After some time, the flashing will stop.

4. Release the FUNCTION, MIDI REC and E.PIANO 1 buttons.

• The Digital Piano will initialize its internal system. You will be able to use the Digital Piano in a short while.

• See “Turning Power On or Off” (page EN-4) for information about turning power on and off.

Playing with Different Tones

Selecting and Playing a Tone
The Digital Piano comes with 19 built-in tones. *1

1. *The names of the tones are marked above the keyboard keys to which they are assigned.
2. *In this manual, these six tones are collectively referred to as “piano tones”. The CONCERT, MELLOW, and BRIGHT tones are collectively referred to as “GRAND PIANO tones”.

To select a tone

1. Select the tone you want.
   • To select GRAND PIANO CONCERT or E.PIANO 1
   • Press the GRAND PIANO button or E.PIANO 1 button. • The button lamp of the selected tone will light.
   • To select one of the other tones
   • While holding down the FUNCTION button, press the keyboard key that corresponds to the tone you want to select.

2. Use the VOLUME controller to adjust the volume.

• Some keys may have more than one tone assigned.
  In this case, each press of the key cycles to the next assigned tone. Which tone is selected by the key press is indicated by beeps.
  Example: Cycling through MODERN, ROCK, and JAZZ settings
  MODERN: (1 beep)
  ROCK: (2 beeps)
  JAZZ: (3 beeps)

• Of the Digital Piano’s 19 built-in tones, the first three are grand piano tone. Each tone has its own distinctive merits, so you should select the tone that suits the song  you are playing along with or your own personal preferences.

changes.
This tone is designed to reproduce damper, resonance, and other piano nuances, which makes it ideal for
virtually any type of piano performance.
MELLOW| A warm, subdued grand piano tone.
BRIGHT| A bright and clear grand piano tone.

Bass Tone (BASS)
Selecting the BASS (LOWER) tone in step 1 of the above procedure will assign the bass tone to the low range (left side) of the keyboard. The high range (right side) will be assigned the tone that was selected when you pressed the BASS key.

• BASS tone lets you effectively split the keyboard between two different tones.
• To return the keyboard to a single tone, select any tone other than BASS.
• You cannot select BASS when recording to Track 2.
• You can configure settings to sustain reverberation of the BASS (LOWER) tone while the damper pedal or sostenuto pedal is pressed. For more information, see “Lower Pedal” (page EN-22).

Layering Two Tones
Use the following procedure to layer two tones, so they sound at the same time.
When specifying two tones for layering, first tone you select will be the main tone, while the second tone will be the layered tone.

1. Hold down the FUNCTION button and press the Select Layer Tone key.
   • For details about using the keyboard keys for settings, see “Keyboard Keys Used for Configuring Settings” (page EN-20).
   • Each press of the keyboard key toggles between on and off.

2. Hold down the FUNCTION button and press key of the tone to be layered.

3. To return to the original tone, hold down the FUNCTION button and press the Select Layer Tone key (which exits the Layer Mode).

• You cannot layer the BASS tone with another tone.
• You cannot perform the layer operation when recording to Track 2.

To adjust the volume balance between two layered tones

1. While holding down the FUNCTION button, use the keyboard keys shown below to adjust the volume of the layered tones.• To return the volume setting to its initial default, hold down the FUNCTION button and press both of the keys at the same time.

Using Effects
Reverb: Makes your notes resonate.
Chorus: Adds more breadth to your notes.
• For details about using the keyboard keys for settings, see “Keyboard Keys Used for Configuring Settings” (page EN-20).
To apply Reverb

1. Each press of the REVERB button toggles reverb between on and off.
   • Reverb is applied when it is turned on.

■ To select the reverb type

1. While holding down the FUNCTION button, press the keyboard key of the reverb type to be applied.
   1: Room
   2: Small hall
   3: Large hall
   4: Stadium

To apply chorus to a tone

1. While holding down the FUNCTION button, use the Chorus keyboard key to cycle through the available settings.
   • Each press of the Chorus keyboard key causes the Digital Piano to beep according to which setting is selected, as shown in the table below.
   • Chorus

1 (long)
1 (short)
2
3
4| Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)

About DSP
DSP makes it possible to digitally produce complex acoustic effects. The DSP is assigned to each tone whenever you turn on Digital Piano power.
Using the Digital Piano’s Pedals
Your Digital Piano comes equipped with three pedals: damper, soft, and sostenuto Pedal Functions

• Damper Pedal
  Pressing the damper pedal while playing will cause the notes you play to reverberate for a long time. Halfpedal operation (pressing the pedal part way) is also supported.
  • When one of the GRAND PIANO tones or the MODERN piano tone is selected, using the damper pedal adds damper resonance that is similar to that produced on an acoustic grand piano.

• Sostenuto Pedal
  Only the notes of the keys that are depressed when this pedal is pressed are sustained until the pedal is released.

• Soft Pedal
  Pressing this pedal while playing suppresses notes played on the keyboard after the pedal was pressed, and makes them sound softer.

• If pressing the pedal does not produce the desired effect, it could mean that the pedal cord is not connected properly. Refer to step 1 under “To connect the cable” (page EN-34).

Disabling Damper Noise Output
Damper noise is a slight metallic ringing sound that is generated as the damper of an acoustic piano separates from the wires pedal when the damper pedal is pressed. The damper resonance of your Digital Piano normally includes damper noise, but you can perform the procedure below to disable its output. Damper noise can be applied to the four piano tones (three GRAND PIANO tones and MODERN).

1. While holding down the FUNCTION button, press the Damper Noise keyboard key.
   • For details about using the keyboard keys for settings, see “Keyboard Keys Used for Configuring Settings” (page EN-20).
   • Each press of the key toggles the setting and causes the Digital Piano to beep as described below.
   – Long beep: Damper noise output disabled
   – Short beep: Damper noise output enabled

Using the Metronome

1. Press the METRONOME button.
   • This starts the metronome.
   • The lamp flashes with each beat.

2. While holding down the FUNCTION button, press the METRONOME BEAT keyboard key.
   • Keep the FUNCTION button depressed as you advance to step 3.

3. Hold down the FUNCTION button and press the BEAT keyboard key (0 to 9) that corresponds to the beat you want to specify.• You can specify a beat value in the range of 0 to 9 (beats per measure). A chime will sound on the first beat of each measure, and clicks will sound for the remaining beats. Specifying 0 plays a straight click, without any chime. This setting lets you practice with a steady beat.

4. Release the FUNCTION button and then hold it down again as you press the
   METRONOME TEMPO keyboard key.
   • Keep the FUNCTION button depressed as you advance to step 5.

5. While holding down the FUNCTION button, use the TEMPO keys to specify a tempo value in the range of 20 to 255 beats per minute.• Each press of the + or – key raises or lowers the tempo value by 1.
   • You can also use the tempo value input keys (0 to 9) to enter a specific tempo value.
   • Input three digits as the tempo value.
   Example: To set a tempo of 20, press keys 0, 2, and then 0.

6. Press the METRONOME button to turn off the metronome.

• If you used the numeric input (0 to 9) keyboard keys to input beat and/or tempo values and the values are within the allowable setting ranges, the Digital Piano will emit a high pitch beep when you release the FUNCTION button. If a value is outside the allowable range, a low-pitch sound will be emitted.
• In step 5 of the above procedure, pressing the + and – keys at the same time will set the tempo of the Concert Play lesson song or Music Library song (in the case of a recorded song, the tempo when the song was recorded) that was last selected on the Digital Piano.

To adjust the metronome volume
You can perform the following procedure at any time, regardless of whether or not the metronome is sounding.

1. While holding down the FUNCTION button, use the Metronome Volume keys to specify a volume value in the range of 0 to 42.
   • For details about using the keyboard keys for settings, see “Keyboard Keys Used for Configuring Settings” on page EN-20.
   • Each press of the + and – key raises or lowers the metronome volume value by

• To return to the initial default setting, press + and – at the same time.

Splitting the Keyboard for Duet Play
You can split the keyboard in the center so the left and right sides have the same range. The left outer pedal is the left side damper pedal, while the right outer pedal is the right side damper pedal.
Keyboard Pedals

• Only the damper pedal for the right side keyboard supports half-pedal operations.

1. Select the piano tone you want to use for the duet.
   Example: GRAND PIANO (BRIGHT)

2. To cycle between the Duet Mode settings below, hold down the FUNCTION button and press the Duet Mode key.
   Off
   On
   Pan: Outputs left side keyboard tone from the left speaker and right side keyboard tone from the right speaker.

IMPORTANT!

• The Octave Shift and Transpose settings cannot be changed while On or Pan is selected for the Duet Mode setting.
• While Pan is selected for the Duet Mode settings, the Hall Simulator, Reverb, and Chorus settings cannot be changed.

Changing the Octaves of the duet keyboards
You can change the ranges of the left and right keyboards in octave units from their initial default settings. This comes in handy, for example, if the initial default range is not enough when one person is playing the left hand part and another person is playing the right hand part.

1. While holding down the FUNCTION and GRAND PIANO buttons, press the keyboard C key that you want located at C4 (middle C) of the left keyboard. Keep  FUNCTION and GRAND PIANO buttons depressed as you advance to step 2, below.
   • This will sound the note assigned to C4 and change the octave of the left keyboard.
   Example: Press the keyboard key of the leftmost C will assign the range shown below.

2. While still holding down the FUNCTION and GRAND PIANO buttons, press the keyboard C key that you want located at C4 (middle C) of the right keyboard.  This will sound the note assigned to C4 and change the octave of the right keyboard.
   NOTE

3. Exiting the Duet Mode and then selecting On or Pan for the Duet Mode setting again will return the keyboards to their initial default ranges.

Using Built-in Songs (Concert Play, Music Library, Demo Tunes)

Your Digital Piano comes with 10 built-in piano and orchestra tunes (Concert Play 1 through 10), and 60 piano solos (Music Library 1 to 60). Concert Play lets you enjoy playing along with orchestral accompaniment. You can use Music Library to practice famous piano pieces. IMPORTANT!

• Whenever you change to another song, this Digital Piano loads the song data. Note that button operations are disabled while song loading is in progress. If you are playing something on the keyboard, changing the song may cause note output to stop.

Performing Demo Play

1. While holding down the FUNCTION button, press the METRONOME button.
   • This starts sequentially looped playback of all Concert Play (Listen) songs and Music Library songs.
   • You can play along with a song on the keyboard as it is playing. The tone assigned to the keyboard is the one that is preset for the song that is playing.

2. To change the demo song, hold down the FUNCTION button and press the MIDI REC button or REVERB button.
   • To advance to the next demo song, hold down the FUNCTION button and press the MIDI REC button.
   • To return to the previous demo song, hold down the FUNCTION button and press the REVERB button.
   • For a list of songs, see page A-1.

3. Press the  button to stop built-in song play.

• Pressing the METRONOME button while holding down the FUNCTION button during Concert Play jumps to the first Music Library song. Performing the same  operation during Music Library play jumps to the first Concert Play song.
• The tune selection and playback stop operations described above are the only operations that are possible during demo tune play.

Concert Play
Concert Play has recordings of a live orchestra, which you can use to play along with authentic accompaniment.
You can also use Concert Play for 3-step practice.
Step 1: LISTEN
Listen to playback of the piano and orchestra to familiarize yourself with the music.
Step 2: LESSON
Practice the Concert Play piano part.
• You can turn off the left hand part or right hand part of a built-in song and play along on the piano.
Step 3: PLAY
Play along with the orchestra accompaniment.
• The Concert Play contains actual recordings of an orchestra. Because of this, the instrument sounds are different from the tones that can be selected with this piano (page  EN-5). This also means that Concert Play playback includes breath sounds and performance noises.
Practicing with a Concert Play Song
To listen to a Concert Play song (LISTEN)

1. While holding down the FUNCTION button, use the CONCERT PLAY SELECT + and – keyboard keys to scroll song numbers in sequences (from 1 to 10).
   • For information about Concert Play songs, see the “Concert Play List” on page A-1.
   

2. While holding down the FUNCTION button, press the LISTEN keyboard key.
   • This enters the Listen Mode for listening to the piano and orchestra performance.
   • Playback tempo is fixed and cannot be changed during Listen Mode playback.
   

3. While holding down the FUNCTION button, press the CONCERT PLAY keyboard key to start playback.
   • Playback will stop automatically when the end of the song is reached.

4. To stop playback, hold down the FUNCTION button as you press the CONCERT PLAY keyboard key again.

• You can use adjust the volume level of the playback, if you want. See “Configuring Settings with the Keyboard” (page EN-19) for more information.

To practice the piano part (LESSON)
PREPARATION

• You can change tempo of the playback, if you want.
  See “Configuring Settings with the Keyboard” (page EN-19) for more information.

• Some Concert Play tunes incorporate tempo changes in their arrangements. Because of this, the playback tempo may at times be faster or slower than the tempo setting.

1. While holding down the FUNCTION button, press the LESSON keyboard key.
   • This enters the Lesson Mode, which allows simple play along with the piano part.
   

2. While holding down the FUNCTION button, press the button to select the part you want to turn off.
   • Pressing a button toggles its part on (button lamp on) and off (button lamp off).
   

3. While holding down the FUNCTION button, press the CONCERT PLAY keyboard key.
   • This starts playback, without the part you turned off in step 2.

4. Play the missing part on the keyboard.

5. To stop playback, hold down the FUNCTION button as you press the CONCERT PLAY  keyboard key again.

To play along with the orchestra accompaniment (PLAY)

1. While holding down the FUNCTION button, press the PLAY keyboard key.
   • This will enter the Play Mode, which plays the orchestra part without the piano part.
   

2. While holding down the FUNCTION button, press the CONCERT PLAY  keyboard key to start playback.
   • Playback tempo is fixed and cannot be changed during Play Mode playback.

3. Play the piano part on the keyboard.

4. To stop playback, hold down the FUNCTION button as you press the CONCERT PLAY  keyboard key again.

Music Library
You can use the Music Library for your listening enjoyment or to practice piano songs.

• The Music Library includes 60 songs, numbered 1 through 60.
• You can also import up to 10 songs* from a computer to Digital Piano memory, and assign them Music Library song numbers 61 through 70.

*** You can download music data from the Internet and then transfer it from your computer to Digital Piano memory. See “Transferring Song Data with a Computer” on page EN-28 for more information.
Playing Back a Specific Music Library Song**

1. Find the song number of the song you want to play in the “Music Library List” on page A-1.

2. To change to another song, hold down the FUNCTION button as you use the MUSIC LIBRARY SELECT (+, –, 0 to 9) keys to specify a song number.
   • Each press of the + or – key raises or lowers the song number by 1.
   • You can also input a value from 0 to 9 to specify a Music Library song number.
   • Input two digits as the song number.
   Example: To specify song number 5, press keys 0 and then 5.
   

3. Press the a button.
   • This starts the playback of the song.

4. To stop playback, press the a button again.
   • Playback will stop automatically when the end of the song is reached.

• Pressing the + and – keys at the same time in step 2 of the above procedure will select song number 1.
• You also can adjust the playback tempo and volume of the song. See “Configuring Settings with the Keyboard” on page EN-19 for more information.

Practicing with a Music Library Song
You can turn off the left hand part or right hand part of a song and play along on the Digital Piano.

• The Music Library includes a number of duets. While a duet is selected, you can turn off the first piano (Primo) or second piano (Secondo) tone and play along with the song.
• Some music library tunes incorporate tempo changes in their arrangements. Because of this, the playback tempo may at times be faster or slower than the tempo setting.

PREPARATION

• Select the song you want to practice and adjust the tempo. See step 3 under “Using the Metronome” (page EN-9).

1. While holding down the FUNCTION button, press the button to select the part you want to turn off.
   • Pressing a button toggles its part on (button lamp on) and off (button lamp off).
   

2. Press the button.
   • This starts playback, without the part you turned off in step 1.

3. Play the missing part on the keyboard.

4. To stop playback, press the button again.

Recording and Playback

You can record notes you play with the Digital Piano’s MIDI recorder for later playback. When a commercially available USB flash drive is inserted in the Digital Piano’s USB flash drive port, audio data is recorded to and played back from the USB flash drive (Audio Recorder).
Recording to Built-in MIDI Recorder
Tracks
A track is a container of recorded data, and a song consists of two tracks: Track 1 and Track 2. You can record each track separately and then combine them so they play back together as a single song.![CASIO PX-765 Digital Piano

• Tracks](https://manuals.plus/wp-content/uploads/2023/04/CASIO-PX-765 -Digital-Piano-Tracks.png) Memory Capacity

  • You can record approximately 5,000 notes in Digital Piano memory.
  • The MIDI REC button lamp will flash at high speed when memory runs low.
  • Recording stops automatically if the number of notes in memory exceeds the maximum.

Recorded Data

• Keyboard play
• Tone used for keyboard play
• Beat (Track 1 only)
• Tempo setting (Track 1 only)
• Layer setting (Track 1 only)
• Duet (Track 1 only)
• Temperament (Track 1 only)
• Keyboard volume (Track 1 only)
• Chorus (Track 1 only)
• Brilliance (Track 1 only)
• Reverb setting (Track 1 only)
• Damper Noise On/Off (Track 1 only)

Recording Data Storage

• Starting a new recording deletes any data that was previously recorded in memory.
• Should power fail during recording, all of the data in the track you are recording will be deleted.

IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no responsibility for any damages, lost profits, or claims by third parties arising from the deletion of recorded data due to malfunction, repair, or for any other reason.
Using the MIDI REC Button
Each press of the MIDI REC button cycles through the recording options in the sequence shown below. Recording to a Specific Song Track
After recording to either of the tracks of a song, you can record to the other track while listening to playback what you recorded in the first track.

1. Press the MIDI REC button once or twice so the MIDI REC lamp is flashing.
   • At this time the L lamp will flash to indicate that the Digital Piano is standing by for recording to Track 1.

2. While holding down the FUNCTION button, press the a button to select the track you want to record.
   • Make sure that the indicator lamp for the record track is flashing.
   Track 1: L lamp
   Track 2: R lamp
   Example: Track 1 selected

3. Select the tone and effects (Track 1 only) you want to use in your recording.
   • Tone (page EN-5)
   • Effects (page EN-7)

• If you want the metronome to sound while you are recording, configure the beat and tempo settings, and then press the METRONOME button. See “Using the Metronome” on page EN-9 for more information.

4. Press the button or start playing.
   • Recording will start automatically.

5. To stop recording, press the button.
   • This will cause the MIDI REC button lamp and the lamp of the track you recorded to change from flashing to lit.
   • To play back the track you just recorded, press the  button.

6. After you are finished recording or playing back, press the MIDI REC button so its lamp goes out.

Recording to One Track while Listening to Playback of the Other Track

1. Press the MIDI REC button so its lamp is lit.

2. While holding down the FUNCTION button, press the button to select the track you want to play back while recording.

3. Press the MIDI REC button so its lamp is flashing.
   • This will cause the L lamp to flash.

4. While holding down the FUNCTION button, press the button to select the track you want to record.
   • Make sure that the indicator lamp for the record track is flashing.
   Example: To listen to playback of Track 1 as you record to Track 2

5. Select the tone and effects (Track 1 only) you want to use for your recording.

6. Press the button or start playing.
   • This will start both playback of the recorded track and recording to the other track.
   • If, while recording is in progress, you want to rerecord from the beginning, hold down the MIDI REC button until the Digital Piano beeps. This discards the current recording data and enters recording standby.

7. To stop recording, press the button.

Playing Back from Digital Piano Memory

1. Press the MIDI REC button so its lamp is lit.
   • When a song has something recorded in both tracks, you can turn off one track and play back just the other track, if you want.

2. Press the button.
   • This starts playback of the song and/or track you selected.

• You can change the tempo setting as a track is playing.
• Press the button again to stop playback.

Deleting Recorded Data
The following procedure deletes a specific track of a song.
IMPORTANT!

• The procedure below deletes all of the data of the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in Digital Piano memory before you perform the following steps.

1. Press the MIDI REC button once or twice so the MIDI REC lamp is flashing.

2. While holding down the FUNCTION button, press the button to select the track you want to delete.

3. Press the MIDI REC button until its lamp is lit.
   • This will cause the lamp of the track you selected in step 2 of this procedure to flash.
   Example: If you selected Track 2 for deletion

4. Once again, hold down the FUNCTION button as you press the button.
   • This deletes the selected track and enters record standby.
   • To cancel the delete operation at any time, press the MIDI REC button so its lamp becomes unlit.

• Only the Digital Piano’s button are operational from step 3 until you actually perform the delete operation in step 4. No other button operation can be performed.

Configuring Settings with the Keyboard

In addition to selecting tones and songs (Concert Play or Music Library), you also can use the FUNCTION button in combination with the keyboard keys to configure effect, keyboard touch, and other settings.
To configure settings with the keyboard

1. Use the “Parameter List” on pages EN-22 – EN-25 to find the setting you want to configure, and note its details.

2. Use “Keyboard Keys Used for Configuring Settings” on page EN-20 to find the location on the keyboard for configuring the setting you want.

3. While holding down the FUNCTION button, press the keyboard key for the setting you want to configure.
   • The Digital Piano will sound an operation tone after it configures the setting.
   Example:To lower the Concert Play volume, press the CONCERT PLAY VOLUME minus (–) key.
   

4. Release the FUNCTION button to complete the setting procedure.

• You can configure the Digital Piano so no operation tone sounds in step 3. For details, see “ Operation tone” under “Parameter List” on pages EN-22 – EN-25.

Keyboard Setting Operation Types
There are four types of operations that you can perform while configuring settings with the keyboard keys: Type A, Type B, Type C, and Type D.
Type A: Direct input
Example: Pressing the JAZZ ORGAN keyboard key to select the JAZZ ORGAN tone
Type B: Raising or lowering a setting using the + and – keyboard keys

• Holding down a key raises or lowers the setting at high speed.
• To return to the initial default setting, press both keys at the same time.

Type C: Inputting a value using the number (0 through 9) keyboard keys.

• To input a two-digit value, press 0 and then 2. To input a three-digit value, press 0, 2, and then 0.

Type D: Toggling or cycling through settings by pressing a keyboard key

• When you press a key, the Digital Piano will beep to let you know which setting is selected.

• A long beep indicates that the applicable setting is turned off.
  Example: While chorus is turned off, pressing the Chorus keyboard key twice will cause the Digital Piano to beep twice, which indicates that the Medium Chorus setting is selected.

• You can find out what operation type applies to each setting by checking the “Operation Type” in the “Parameter List” on pages EN-22 – EN-25.

Keyboard Keys Used for Configuring Settings

• The numbers 1 through 33 correspond to the same numbers in the “Parameter List” on pages EN-22 – EN-25.

Parameter List
■ Tones

notes. Pressing [+] makes notes brighter and harder. Pressing [–] makes notes mellower and softer.| • To return the setting to its initial default (0), press [+] and [–] at the same time.
24 Layer balance| –24 to 0 to 24 Default: –10| B| Specifies the volume balance between the main tone and the layered tone. (page EN-6)| • To return the setting to its initial default (–10), press [+] and [–] at the same time.
6 Lower Pedal| Off, On Default: Off| D| When turned on and the BASS (LOWER) tone is selected, pressing the damper pedal or sostenuto pedal will apply sustained reverberation to the BASS (LOWER) tone. (page EN-6)|
7 Damper noise| Off, On Default: On| D| Enables/disables damper noise output. (page EN-8)|
18 Select layer tone| Off, On Default: Off| D| Enables or disables layering. (page EN-6)| • BASS (LOWER) cannot be layered with another tone.
• Configuring of layering settings is not supported for recording function Track 2 recording.
31 Duet mode| Off, On, Pan Default: Off| D| Enables or disables the Duet Mode. (page EN-10)| • When Pan is specified, Reverb and Chorus effects cannot be applied.

■ Song/Metronome

while recording.
14 Tempo (TEMPO)| 20 to 255 Default: 120| BC| Specifies the tempo of Concert Play Lesson Mode songs, Music Library songs, the metronome, recording and playback, etc. (page EN-9)| • During recording, pressing + and – at the same time sets a value of 120.
• The tempo cannot be changed while in the Concert Play LISTEN Mode or PLAY Mode.
14 Beat (BEAT)| 0 to 9 Default: 4| C| Specifies the metronome beat. (page EN-9)|
15 METRONOME TEMPO| –| –| Enters a setting mode for specifying the metronome tempo with keyboard keys. Use the 14 TEMPO keyboard keys to input a tempo value. (page EN-9)| • The tempo cannot be changed while in the Concert Play LISTEN Mode or PLAY Mode.
16 METRONOME BEAT| –| –| Enters a setting mode for specifying the metronome beat with keyboard keys. Use the 14 BEAT keyboard keys to input a beat value. (page EN-9)|
8 CONCERT PLAY | Play, Stop| D| Toggles a Concert Play song between play and stop. (page EN-13)| • This setting cannot be changed while recording.
9 LISTEN| –| A| Enters the Concert Play Listen Mode. (page EN-13)| • This setting cannot be changed while recording.
10 LESSON| –| A| Enters the Concert Play Lesson Mode. (page EN-14)| • This setting cannot be changed while recording.
11 PLAY| –| A| Enters the Concert Play Play Mode. (page EN-14)| • This setting cannot be changed while recording.
12 CONCERT PLAY SELECT (Song) (SELECT +/–)| 1 to 10 Default: 1| B| Specifies a Concert Play song number. (page EN-12)| • This setting cannot be changed while recording.
13 CONCERT PLAY VOLUME (VOLUME +/–)| 0 to 42 Default: 32| B| Sets the volume level of Concert Play playback.| • This setting cannot be changed while recording.
28 Music Library volume| 0 to 42 Default: 42| B| Sets the volume level of Music Library playback.| • This setting cannot be changed while recording.
29 Metronome volume| 0 to 42 Default: 36| B| Specifies the metronome volume. (page EN-10)|

■ Keyboard

19 Temperament
20 Temperament Base note
14 Temperament select| Temperament: 0 to 16 Base note: C to B
Defaults: Temperament: 0 (Equal Temperament) Base note: C| <Selecting a Temperament> While holding down the FUNCTION button, press the applicable keyboard keys as described below.
1.  Press the 19 Temperament keyboard key.
2.  Use the 14 Temperament Select keyboard keys to select the desired temperament.
•  If you want to advance directly base note selection from here, release the FUNCTION button and continue with the procedure below.