WISI Group OL 16 1310 Optical Transmitter Kit User Manual
- June 9, 2024
- WISI Group
Table of Contents
WISI OL 16 1310 Optical Transmitter Kit
The OL 16 1310 is an optical transmitter kit that combines the satellite frequencies of the wideband LNB, FM-/DAB- Radio, and signals from a terrestrial antenna DVB-T/T2. The IP65-specified housing ensures installation at the dish location.
At a glance:
- 3x RF Inputs with F connector (Radio/H/V)
- 1x Optical Output with +7dBm (+-0.5 dB) power
- Wideband Output Vertical / Breitband Ausgang Vertikal
- Wideband Output Horizontal / Breitband Ausgang Horizontal
- Optical Output FC/PC / Optischer Ausgang
- Terrestrial Input F type (+12V remote feed)
- Power in F-Type (+20V) / Eingang Spannungsversorgung F-Anschluss (+20V)
- LED Power On indicator / LED Betriebsanzeige
Assembly Instructions:
Coaxial Connections:
- Ports labeled V or H should be connected to a suitable wideband LNB (recommended WISI OC07 E ). Please make sure that the correct polarisations are connected to the relevant ports.
- Voltage is supplied for LNB powering. V = 12V, H = 20V. Maximum current 500mA inclusive terrestrial.
- The input marked FM/DAB/DTT* should be connected to your terrestrial antennas using an appropriate combiner. Signals should be filtered and leveled for optimum performance.
- The voltage supplied on the terrestrial input is 12V and is intended for powering a masthead amplifier.
- If the terrestrial input is connected to a device not designed for a voltage, then a DC block should be installed between the OL17 and the device.
Optical Connection:
- Clean the optical connector and make a connection to the optical output of the OL17, ensuring the keyway is aligned.
- The gel must be supplied should be clipped around the FC/PC connector to ensure weather protection. Performance/operational lifetime may be affected if the gel must not fitted.
Power Connections:
- The OL17 can be directly powered at F connector power input using a 20V PSU with the DC-jack to F adapter.
- The mains adapter is the disconnect device for the unit. Please ensure it is easily accessible.
- LED on the OL17 indicates the correct powering of the unit. The LED should be constantly green.
- Maximum current draw 350mA (excluding current on connected inputs).
Technical Data:
E/O Wandler OL 17 1310
Overview
D Combines the satellite frequencies of the wide-band LNB, FM-/DAB- Radio, and signals from a terrestrial antenna DVB-T/T2. The IP65-specified housing ensures an installation at the dish location.
- D 3x RF Inputs with F connector (Radio/H/V)
- D 1x optical output with +7dBm (+-0.5 dB) power
Connections
- Wideband Output Vertical
- Wideband Output Horizontal
- Optical Output FC/PC
- Terrestrial Input F type (+12V remote feed)
- Wideband Input Vertical F type (+12V remote feed)
- Wideband Input Horizontal F type (+20V remote feed)
- Power in F-Type (+20V)
- LED Power On indicator
Coaxial Connections
- Ports labeled V or H should be connected to a suitable wideband LNB (recommended WISI OC07 E ). Please make sure that the correct polarisations are connected to the relevant ports.
- Voltage is supplied for LNB powering. V = 12V, H = 20V. Maximum current 500mA inclusive terrestrial.
- The input marked FM/DAB/DTT* should be connected to your terrestrial antennas using an appropriate combiner. Signals should be filtered and leveled for optimum performance.
- The voltage supplied on the terrestrial input is 12V and is intended for powering a masthead amplifier.
- If the terrestrial input is connected to a device not designed for a voltage, then a DC block should be installed between the OL17 and the device.
DTT: Digital Terrestrial Television (DVB-T/T2)
Assembly instruction
Optical Connection
- Clean the output fiber optical connector and check the optical power using a suitable optical power meter. The optical power at the output of the OL17 is +7dBm ±0.5dB.
- Clean the optical connecter and make a connection to the optical output of the OL17, ensuring the keyway is aligned.
- Important – The gel must be supplied and should be clipped around the FC/PC connector to ensure weather protection. Performance / operational lifetime may be affected if the gel must not be fitted.
Power Connections
- The OL17 can be directly powered at F connector power input using a 20V PSU with the DC-jack to F adapter.
- The mains adapter is the disconnect device for the unit. Please ensure it is easily accessible.
- LED on the OL17 indicates the correct powering of the unit. The LED should be constantly green.
- Maximum current draw 350mA (excluding current on connected inputs).
Technical Data
OL 17 1310 / Optical Converter
Input
- Frequency range-SAT 290…2340 MHz
- Impedance 75 Ù
- Return loss 20 dB (optical)
- Frequency range DVB-T 470…694 MHz
- Frequency range DAB 174…240 MHz
- Frequency range FM 88…108 MHz
- Level range 70…85 dBµV (Satellite); 70 dBµV (Terrestrial)
- Ripple 1 dB
- Gain variation full band FM 88…108 MHz <1 dB; -DAB 174…240 MHz<1 dB; Terr. (DVB-T) 479…694 MHz <3…5 dB; SAT <=3 dB; Rejection @4G800 frequencies 791…862 MHz (relative)>30 dB
- Connector DVB-T, DAB, FM 1x F-female
- Connector SAT 2x F-female
Output
- Wavelength 1310 nm (±20 nm)
- Optical power 7dBm +- 0.5dB
- Connector FC/PC
General data
- Input voltage 20 V DC (F-Connector)
- Current consumption max 350mA (excluding current on the connected inputs)
- Maximum upstream current 500 mA
- Output Voltage Vertical 12 V
- Output voltage Horizental 18 V
- Operating temperature -20…+60 °C
- Weight 0.445 kg
- Dimensions W x H x D 160 x 25 x 162 mm
Wideband LNB OC07
Electrical data
- Input frequency 10.70. 12.75 GHz
- Local Oscillator Frequency 10.41 GHz
- Output frequency 290.. 2340 MHz
- Gain 50.. 62 dB
- Noise figure typ. 0.5 dB
- Gain variation full band 7 dB (p-p)
- Polarization isolation typ. -30 dB
- Image rejection 40 dB
- In-band spurious level -60 dBm
- L.O. phase noise @ 10 kHz -75 dBc/Hz
- L.O. temperature drift @ 25°C ±0,8 MHz
- Output impedance 75 Ù
Mechanical Data
- Color Dark Grey, Pantone 432C
- Feed diameter 40 mm
- With protective enclosure Yes
- Connectors
- RF-Output 2x F-female
General data
- Type Wideband
- Subscriber Depending on the multiswitch
- Integrated multi switch No
- Terrestrial feed No
- Input voltage 8.. 21 V DC
- Current consumption max. 125 mA
- Operating Temperature -30.. +60 °C
- Weight 0,445 kg
- Dimensions (B) 60 mm
- Dimensions (H) 60 mm
- Dimensions (T) 100.2 mm
Mounting Dimensions
This Package contains:
- E/O Converter
- OC 07 E Wideband LNB
- 20V DC Power Supply Unit (PSU)
- coaxial cable
- Gel muft
Installation
WISI Communications GmbH & Co. KG Wilhelm-Sihn-Strasse 5-7 · 75223, Germany
+49 72 33 / 66 – 0
info@wisi.de
katalog.wisi.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>