tp-link T315 Matter Certified Device Instructions
- June 9, 2024
- tp-link
Table of Contents
Set Up with Matter
T315 Matter Certified Device
This is a Matter-certified device. You can integrate it into any Matter ecosystem you prefer for easy control.
Before You Start
- Factory reset your device before setup.
- A Matter-supported controller and smart home app of the same ecosystem are required. For optimal performance, please update them to the latest version.
- The Matter setup code on the device is only applicable for the initial ecosystem. To add it to a new ecosystem, you will need to generate a new setup code from a smart home app of an already-established ecosystem in your home.
- Take a photo of the Matter setup code for backup.
- Bluetooth will be turned off 15 minutes after the device is powered up. Restart your device to re-enter setup mode.
How to Set Up
*Setup processes may vary between ecosystems.
- Turn on Bluetooth on your phone.
- Open the smart home app, then scan the Matter QR code or enter the provided numeric setup code (usually can be found on your device).
- Follow the instructions in the app to complete setup.
Failed to Set Up?
- Try to connect your phone to a stable 2.4 GHz Wi-Fi network with internet access instead of a 5 GHz network.
- Restart your device, controller or phone.
- Make sure IPv6 is enabled on your router.
- Refer to the FAQ for more help: https://www.tp-link.com/support/faq/3520/
7106510240 REV1.0.0
©2023 TP-Link
Documents / Resources
| tp-
link T315 Matter Certified
Device
[pdf] Instructions
7106510240, T315, T315 Matter Certified Device, Matter Certified Device,
Certified Device
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>