Traxxas EZ-peak Plus FAST CHARGER User Manual

October 29, 2023
Traxxas

Traxxas EZ-peak Plus FAST CHARGER User Manual

Traxxas-EZ-peak-Plus-FAST-CHARGER-PRODUCT

Thank you for purchasing the Traxxas EZ-Peak Plus charger. This charger features exclusive Traxxas innovations that make charging batteries easier and safer than ever. If you have any questions or concerns about your charger, please contact our customer support team for fast, friendly answers and solutions. Contact information is at the bottom of this page.
WARNING! For best charging results and your safety, it is essential that you read and understand these instructions before using the charger. Charging and discharging batteries have the potential for serious injury and damage to property. Use care when charging and follow all instructions and cautions

Traxxas-EZ-peak-Plus-FAST-CHARGER-FEATURED

  • Battery iD Start/Stop
  •  LiPo Charge Mode Select
  •  Battery Type Select
  •  Charge Rate Select
  • Charger Output Port (Traxxas High-Current Connector)
  • 2S/3S Lipo Balance Ports (pull to remove cover)
  • Charge Status LED
  • Charge Progress/Charge Rate LEDs

Charging Traxxas iD NiMH Batteries

  1. Power up the charger and connect the batteryTraxxas-EZ-peak-Plus-FAST-CHARGER-FIG-2
  2. Verify charge settings Battery type selected must match the battery type shown on the battery.Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-2
  3. Charging Traxxas iD LiPo Batteries Charging Traxxas iD NiMH BatteriesTraxxas-EZ-peak-Plus-FAST-CHARGER-FIG-4

Charging

Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-5
Press and hold the Start button for 2 seconds to start. Press once to stop

Charge cycle complete
The EZ Peak Plus will trickle charge your NiMH battery at up to 200mA for 12 hours after the charge cycle is complete

Charging Traxxas iD LiPo Batteries

Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-6

  1. Power up the charger and connect the battery
  2. Verify charge settings Battery type selected must match the battery type shown on the battery.Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-6

LiPo Charging Modes

Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-8

Charging

Press and hold the Start button for 2 seconds to start. Press once to stop the Charge cycle and complete

Charging Traxxas Batteries without iD in Advanced Mode

Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-12

Advanced Mode is for users that have an in-depth knowledge of battery chemistry (types) and battery charging techniques. Advanced mode also allows you to adjust the charge rate (current) for Traxxas iD batteries. If you do not understand the differences in various battery types, then do not use Advanced Mode. Use the Traxxas Battery iD system instead for safe, easy, and fast charging.

  1. Connect the main connector and the balance connector to the charger When a battery is connected for charging that does not have Traxxas iD, the red charge rate/progress LEDs will sweep in a scanning motion. Advanced The mode must be used for manual battery type and charge rate selection. The Start button will not light blue when there is no Traxxas iD present.Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-13
    WARNING: DO NOT attempt to charge LiPo batteries with missing or damaged balance connectors. The EZ-Peak Plus will default to LiPo mode charging when a balance plug connection i s detected. If you fail to plug in the balance connector or attempt to charge a LiPo battery with a damaged or missing balance connector, you create the risk of accidentally selecting to charge a LiPo battery in NiMH mode resulting in fire and possible injury to yourself and others. Always make sure to select the battery type that matches the connected battery. If you do not understand what this warning means, do not attempt to use Advanced Mode on the EZ-Peak Plus. Contact Traxxas for more information.

  2. Enter Advanced Mode Simultaneously press and hold the Start button and the Charge Rate Select button for 2 seconds.

  3. Charging a NiMH battery Press and hold the Start button for 2 seconds to start. Press once to stop.Traxxas-EZ-peak-Plus-FAST-CHARGER-FIG-15

  4. Charging a LiPo battery LiPo mode should be selected by default (green  LEDs). If the LiPo and NiMH LEDs alternately blink then the balance connector is either disconnected or damaged. Do not attempt to charge this LiPo battery.

Charger Error Codes

If the charger detects an error during the charging process, the charge status LEDs will ash an error code.

WARNING! CAUTION! DANGER! FIRE HAZARD!
CHARGING AND DISCHARGING BATTERIES HAVE THE POTENTIAL FOR FIRE, EXPLOSION, SERIOUS INJURY, AND PROPERTY DAMAGE IF NOT PERFORMED PER THE INSTRUCTIONS. BEFORE USE, READ AND FOLLOW ALL MANUFACTURER’S INSTRUCTIONS, WARNINGS, AND PRECAUTIONS. NEVER ALLOW CHILDREN UNDER THE AGE OF 14 TO CHARGE OR USE LIPO BATTERIES WITHOUT THE SUPERVISION OF A RESPONSIBLE, KNOWLEDGEABLE ADULT.

Important warnings for users of Lithium Polymer (LiPo) batteries
Lithium Polymer (LiPo) batteries are significantly more volatile than other rechargeable batteries.

  • ONLY use a Lithium Polymer (LiPo) balance charger with a balanced adapter port to charge LiPo batteries. Never use NiMH or NiCD-ty pe chargers or charge modes to charge LiPo batteries. DO NOT charge with a NiMH-only charger. The use of a NiMH or NiCD charger or charge mode will damage the batteries and may cause fire and personal injury.
  • Never charge LiPo battery packs i n series or parallel. Charging packs in series or parallel may result in improper charger cell recognition and an improper charging rate that may lead to overcharging, cell imbalance, cell damage, and fire.
  • ALWAYS inspect your LiPo batteries carefully before charging. Look for any loose leads or connectors, damaged wire insulation, damaged cell packaging, impact damage, fluid leaks, swelling (a sign of internal damage), cell deformity, missing labels, or any other damage or irregularity. If any of the above conditions are observed, do not change or use the battery pack. Follow the disposal instructions included with your battery to properly and s afely dispose of the battery.
  • Do not store or charge LiPo batteries with or around other batteries or battery packs of any type, including other LiPos.
  • Store and transport yo ur LiPo batteries in a cool dr y place. Do not store in direct sunlight. Do not allow the storage temperature to exceed 140°F or 60°C or the cells may be damaged and create a fire risk.
  • Do NOT disassemble LiPo batteries or cells.
  • Do NOT attempt to build your own LiPo battery pack from loose cells.
  • ALWAYS proceed with caution and use good common sense at all times.

Warranty Information

Traxxas electronic components are warranted to be free from defects in materials and workmanship for a period of 30 days from the date of purchase.
Limitations: Any and all warranty coverage does not cover the replacement of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or transportation of a defective component to us. This warranty is limited to the charger only and does not cover batteries, vehicles, and other accessories used in conjunction with the charger.

Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair electronic components for a flat rate. Please visit Traxxas.com/support for a current schedule of warranty costs and fees. The covered repairs are limited to non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged by intentional abuse, misuse, or neglect may be subject to additional charges. Traxxas’s liability, in no case, shall be greater than the actual purchase price of this product. For replacement, the product must be returned in brand new condition, with packaging and itemized sales receipt.

Charging and handling precautions for all battery types

  • ALWAYS proceed with caution and use good common sense at all times.
  • Charge only NiMH packs or 2S–3S LiPo battery packs.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the applianc e by a person res possible for their safety. Children require adult supervision while using this charger.
  • DO NOT let any exposed battery contacts or wires touch each other. This will cause the battery to short circuit and create the risk of fire.
  • While charging, ALWAYS place the battery in a fire retardant/fire proof container and on a non-flammable surface such as concrete.
  • DO NOT operate the charger inside of an automobile.
  • NEVER charge batteries on wood, cloth, carpet or on any other flammable material.
  • ALWAYS charge batteries in a well-ventilated area.
  • REMOVE flammab le items and combustible materials from the chargi ng area.
  • DO NOT operate the charger in a clu ttered space, or pace objects on to p of the charger or battery.
  • If any battery or battery cell is damaged in any way, do NOT charge, discharge, or use the battery.
  • Keep a Class D fire extinguisher nearby in case of fire.
  • BEFORE you charge, ALWAYS confirm that the charger settings exactly match the type (chemistry), specification, and configur action of the battery to be charged.
  • DO NOT exceed the battery manufacturer’s maximum recommended charge rate.
  • DO NOT disassemble, crush, short circuit, or expose the batteries or cel ls to flame or any other source of ignition.
  • If a battery gets hot to the touch during the charging process, disconnect the battery from the charger and discontinue charging immediately.
  • DO NOT leave the charger and battery unattended while charging, discharging, or any time that the charger is ON with a battery connected. If there are any signs of a malfunction o r in the event of an emergency, unplug the charger from the power source and disconnect the battery from the charger.
  • ALWAYS unplug the charger and disconnect the battery when not in use.
  • Never connect mo re than one battery at a time to the charger.
  • DO NOT disassemble the charger.
  • REMOVE the battery from your model or device before charging.
  • DO NOT expose the charger to water or moisture.
  • ALWAYS store battery packs safely out of the reach of children and pets.
  • DO NOT charge batteries under ANY of the following conditions:
    • Batteries that are hot to the touch.
    • Batteries that are not expressly stated by the manufacturer to be suitable to accept the power output (voltage and amperage) the charger delivers during the charging process.
    • Batteries that are damaged or defective in any way. Examples of damage or defects include but are not limited to, batteries with dented cells, damaged or frayed wires, loose connections, fluid leaks, corrosion, plugged vents, swelling, cell deformity, impact damage, missing labels, melted components, or any other signs of damage.
    • Battery packs that have been altered from the original manufacturer configuration.
    • Non-rechargeable batteries (explosion hazard ).

Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 1-888-T TRAXXAS (Toll- free, US only) or 9 72-549-3000
Download PDF:Traxxas EZ-peak Plus FAST CHARGER User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals