Arenaluci WAL2005E-WW Wall LED User Manual
- June 10, 2024
- Arenaluci
Table of Contents
Arenaluci WAL2005E-WW Wall LED User Manual
Please read these instructions carefully before commencing installation. Please keep the instructions for future reference.
Warning:
-
Please read this manual carefully before start the installation and keep it well; Manual version upgrade without notice.
-
Please cut off the power supply before installation.
-
Memo: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Safety Messages
- Installation, mounting or works on the electrical connection may only be carried out by an approved electrician. Do not cover the product – provide free air circulation! Do not hang or fasten anything on the product, especially no decoration. Do not open the lamps without an approved electrician. Operate the product only when it functions properly:
- Anything of the lights can not be changed at random
Basic product information:
INSTALLATION
- Please take off the embedded box.
- Dig the embedded groove according to the cut-out.
- Fix the embedded box in the mouting surface, and leave the power wire for 150-200mm.
- Put on the lamp cover and tight the screw.
- Leave the wire in the embedded box and stuck in the lamp.
Arena Luci Design srl via Svizzera 12/14 – 46042 Castel Goffredo (MN), Italy Tel. +39 0376 782411 – Fax +39 0376 780973 www.arenaluci.corn – info@arenaluci.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>