NVIDIA TITAN X TechPowerUp GPU User Guide
- June 10, 2024
- Nvidia
Table of Contents
TITAN X TechPowerUp GPU
Product Information
The product is a graphics card that supports NVIDIA SLI High
Bandwidth and provides audio over HDMI. It comes with GeForce
Experience software that allows users to optimize their gaming
experience. The product conforms to the RoHS legislation of the
European Union.
Minimum System Requirements
- Operating System: Windows 7, 8, 10 (64-bit)
- CPU: Intel Core i5-2500K or AMD FX-6300
- RAM: 8GB
- Graphics Card: NVIDIA GeForce GTX 660 or AMD Radeon R9 270
- Free Disk Space: 50GB
Hardware Installation
Before installing the graphics card, please read the safety
instructions carefully. The graphics card can be installed by
following the steps below:
-
Turn off your computer and disconnect all cables.
-
Remove the cover of your computer case.
-
Locate the PCIe slot on your motherboard and remove the metal
backplate from the corresponding slot on the back of your computer
case. -
Gently insert the graphics card into the PCIe slot and secure
it with the screw that was removed from the backplate. -
Connect the power cable from your power supply to the graphics
card. -
Replace the cover of your computer case and reconnect all
cables. -
Turn on your computer and install the necessary drivers.
Software Installation
To install the GeForce Experience software, follow the steps
below:
-
Visit the NVIDIA website and download the GeForce Experience
software. -
Run the downloaded file and follow the on-screen instructions
to complete the installation. -
Once the installation is complete, open the GeForce Experience
software and optimize your gaming experience.
Configuring SLI
SLI can be configured by accessing the NVIDIA Control Panel and
enabling or disabling it. Follow the steps below:
-
Right-click on your desktop and select NVIDIA Control
Panel. -
Select Set SLI configuration from the left-hand menu.
-
Select Enable SLI or Disable SLI, depending on your
preference. -
Click Apply to save your changes.
Configuring HDMI
To enable audio over HDMI, follow the steps below:
-
Connect your HDMI cable from your graphics card to your monitor
or TV. -
Right-click on your desktop and select NVIDIA Control
Panel. -
Select Set up digital audio from the left-hand menu.
-
Select your monitor or TV from the list of devices.
-
Click Apply to save your changes.
Compliances
The product complies with the following regulations:
- RoHS legislation of the European Union
- United States regulations
- Australia and New Zealand regulations
- UK Conformity Assessed
01 INTRODUCTION
About This Guide…………………………………………………………………………………. 3 Minimum System Requirements
…………………………………………………………………. 4
02 UNPACKING
Equipment ……………………………………………………………………………………….. 6
03 Hardware Installation
Safety Instructions……………………………………………………………………………….. 7 Before You Begin
………………………………………………………………………………… 8 Installing the GeForce Graphics
Card……………………………………………………………. 8
04 SOFTWARE INSTALLATION
GeForce Experience Software Installation ………………………………………………………12
05 CONFIGURING SLI
Accessing the NVIDIA Control Panel…………………………………………………………….14 Enabling /
Disabling SLI …………………………………………………………………………15
06 CONFIGURING HDMI
Enabling Audio Over HDMI ………………………………………………………………………16
07 FEATURES
08 Compliances
UNITED STATES …………………………………………………………………………………20
………………………………………………………………………………………….. 21 ……………………………………………………………………………… 21
Australia and New Zealand………………………………………………………………………22 UK Conformity Assessed
…………………………………………………………………………22
…………………………………………………………………………………………… 23 KOREA
……………………………………………………………………………………………25 Taiwan
…………………………………………………………………………………………… 27 China
…………………………………………………………………………………………….. 29 India
……………………………………………………………………………………………..30 Ukraine
…………………………………………………………………………………………..31 Morocco
………………………………………………………………………………………….31
Bridge
NVIDIA SLI High Bandwidth
Compliance Model: PG611)
JIS C 0950:2008200671
Pb
Hg
Cd
Cr(VI)
PBB
PBDE
PCB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
/
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1.0JIS C 0950:2008 2. JIS C 0950:2008 3.0.1wt%0.01wt%JIS C 0950:2008
:
():
( )
1101810036373
:
120-8406711
511, 2101 ( , )
()
,
11 1 3 , . :
“. ” 8 1 2 .
(), , . .
Declaration of the presence condition of the Restricted Substances Marking
Equipment Name: Graphic Card
Parts
PCB PCB Passive components Active components Processor
Parts
Memory Mechanical parts and Fan / Cables/Connectors Soldering material
Restricted substances and its chemical symbols
(Pb )
(Hg)
(Cd) (Cr(VI)) (PBB)
(PBDE)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Restricted substances and its chemical symbols
(Pb )
(Hg)
(Cd) (Cr(VI)) (PBB)
(PBDE)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Flux, Solder Paste, label and other
O
O
O
O
O
O
consumable materials
1O
Note 1 Oindicates that the percentage content of the restricted substance does not exceed the
percentage of reference value of presence. 2 –
Note 2-indicates that the restricted substance corresponds to the exemption.
“-” RoHS All parts named in this table with an “-” are in compliance with the European Union’s RoHS Legislation.
Note: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.
The Table of Hazardous Substances and their Content
as required by Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products
PCB PCB
Parts
Hazardous Substances
(Pb)
(Hg)
(Cd) (Cr(VI))
(PBB)
(PBDE)
O
O
O
O
O
O
Passive components
X
O
O
O
O
O
Active components
X
O
O
O
O
O
Processor
O
O
O
O
O
O
Mechanical parts and Fan / Cables/Connectors
Soldering material
X
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
Flux, Solder Paste, label and other
O
O
O
O
O
O
consumable materials
SJ/T 11364-2014 The table according to SJ/T 11364
OGB/T 26572 O: Indicates that this hazardous substance contained in all of the
homogeneous materials for this
part is below the limit requirement in GB/T 26572.
XGB/T 26572 X: Indicates that this hazardous substance contained in at least
one of the homogeneous materials used
for this part is above the limit requirement in GB/T 26572.
“X” RoHS All parts named in this table with an “X” are in compliance with the
European Union’s RoHS Legislation.
Note: The referenced Environmental Protection Use Period Marking was
determined according to normal operating use conditions of the product such as
temperature and humidity.
India RoHS Self-Declaration Form (as per E-Waste (Management) Rules, 2016)
Product Category& Code (as Per Schedule Sr. I of E-Waste No. (M) Rules, 2016
Product Name
RoHS In case Product is
Information imported from
Date of Compliance provided on other country,
Product placing with
product
name of the
Model Weight on
RoHS info booklet
country
No. (g) market Yes/No Yes/No manufactured
TEW2
Graphic
i.
N/A N/A N/A Yes
Yes
China
(Graphic Card) Card
References
- Update Drivers & Optimal Playable Settings | NVIDIA GeForce Experience
- Access Customer Support | NVIDIA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>