Paulmann 969.92 Urail LED Limba Rail Spot Instruction Manual
- June 10, 2024
- Paulmann
Table of Contents
Paulmann 969.92 Urail LED Limba Rail Spot
Product Information
- The product is a luminaire that contains a light source with energy efficiency class A++ or A.
- The replaceability of the light source or operating device depends on the model:
- (1) Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire.
- (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire.
- (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.
- The product complies with Regulation (EU) No 874/2012 and the energy efficiency labeling requirements of 2019/2015.
- For more information on product symbols, please visit www.paulmann.com/symbols
Product Usage Instructions
- Before use, carefully read and follow all safety instructions provided in the user manual.
- If the light source or operating device needs to be replaced, refer to the model number and replaceability information provided in the user manual to determine if it can be done by an end user or qualified electrician. If the light source or operating device is not replaceable, replace the entire luminaire.
- When replacing the light source or operating device, ensure that the new component has the same specifications as the original one.
- Do not attempt to replace the light source or operating device if you are not qualified to do so.
- Do not modify or disassemble the luminaire as this may cause permanent damage and void the warranty.
- Use the luminaire only for its intended purpose and within its specified operating conditions.
- Keep the luminaire away from sources of heat, moisture, and direct sunlight.
- Clean the luminaire with a soft, dry cloth. Do not use abrasive cleaners or solvents.
UNPACKING
ASSEMBLY
This product contains a light source with energy efficiency class
Replaceability: (1) Light source or (4) operating device can be replaced by
end users without permanent damage to the luminaire. (2) Light source or (5)
operating device can be replaced by a qualified electrician without
permanently damaging the luminaire. (3) Light source or (6) operating device
is not replaceable,the luminaire must be replaced.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>