defender CH-150 Plus Car Holder for Phone User Manual
- June 10, 2024
- Defender
Table of Contents
CH-150+ Holder for Phone
User Manual
Holder assembling
1.2 Connect both parts of the holder together
1.2.1 Put the nut on the ball
1.2.2Put the top of the holder onto the ball
1.2.3 Screw the nut onto the top of the holder
Installing the holder on the dashboard/windshield
2.1 Clean and degrease the surface — where the holder will be installed
2.2 Lift the suction cup lever
2.3 Press the holder against the cleaned surface firmly
2.4 Lower the lever while continuing to press the holder to the
surface
2.5 Set the most convenient position of the holder leg
2.5.1 Loosen the screw
2.5.2 Select holder leg position
2.5.3 Fix with screw
2.6 Set the upper part of the holder to the desired position and fix
Installing the smartphone in the holder
CAR HOLDER OPERATION MANUAL
Terms and conditions of safe and efficient use of the product Usage precautions:
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
- Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product. In case of mechanical damage no warranties are provided.
- Do not use in the presence of visual damage. Do not use when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures (-30 – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
- Do not put into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
- Reliable fixation on the windshield and dashboard even with textured surface thanks to creation of vacuum effect by suction cup – The holder must be installed on a flat/not rounded previously degreased surface
- Easy to adjust the position of the device vertically
- Specification
- Adjustable distance between clamps: 58-90 mm
- Rotation: 360 °
- Mounting: for the glass, on the dashboard
- Material: ABS
- Color: black
IMPORTER: Defender Technology 00, Betooni str 11, 11415, Tallinn,
Estonia.
Manufacturer: China Electronics Shenzhen Company.
Address: 35/F, Block A, Electronics Science & Technology Building, Shennan
Zhonglu, Shenzhen, China.
Unlimited shelf life. Service life is 2 years.
Date of manufacture: see on the package. Manufacturer keeps the right to
change package contents and specifications indicated in this manual.
The latest and detailed operation manual is available at www.defender-
global.com
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>