HUION HS611 Digital Graphics Drawing Tablet User Manual

HS611 Digital Graphics Drawing Tablet

Product Information

The Huion Inspiroy HS611 is a drawing tablet that comes with a battery-free pen, replacement nibs, pen holder, USB-C cable, quick start guide, and warranty card. It can be connected to a computer or an Android phone/tablet. The tablet supports Windows 7 or later and macOS 10.12 or later. The driver for the tablet can be downloaded from the Huion website.

Product Usage Instructions

Precautions

Please read the user manual carefully before using the product and keep it for future reference.

Connecting to Android Phone & Tablet

1. Make sure your phone & pad OS is Android OS 6.0 or later.

2. For some models, you need to enable OTG function in phone or pad settings.

3. Choose the right OTG adapter from the package depending on the USB port type of your phone.

4. Connect the pen tablet to your phone following the illustrations provided in the manual.

5. Please make sure your phone & pad OS is as following: Android OS 6.0 or later.

6. For some models, you need to go phone or pad “Settings” then enable “OTG” function.

7. Choose the right OTG Adapter from package, which depends on USB port type of your phone, then connect pen tablet to your phone following the illustrations below:
   Notes:

8. The pen tablet can works without installing any driver into your phone.

9. Once connected, the tablet will automatically enter phone mode, in which the pen can only work in the left gray area.

10. Please note that the press keys of pen tablet and digital pen are not supported in phone mode.

Install Driver

1. Uninstall other drivers of similar products, including the old driver of this product.
2. Close all graphics software and anti-virus software before installing the driver.
3. Download the driver from the Huion website.
4. Install the driver.
5. Connect the tablet to your computer using the USB cable.
6. The driver icon will appear in the system tray area, indicating that the driver was installed successfully.
7. The icon will change to color when the tablet is connected to the computer, indicating that the driver has recognized the tablet and you can start using it now.

Pen Basic Operation

Position the Cursor

Move the pen slightly above the active area without touching the screen surface, and the cursor will move to the new position accordingly. Press the pen tip on the screen to make a selection.

Click

Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it.

Hold the pen

Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.

Notice:
When not in use, place the pen in the pen case or on the desk. Do not place the pen on the surface of screen, which may interfere with the use of other screen cursor positioning equipment, may also cause your computer can not enter the sleep mode.

Position the cursor

Move the pen slightly above the active area without touching the screen surface, the cursor will move to the new position accordingly. Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.

Click

Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it.

Move

Select the object, then slide the pen tip across the screen to move it.

Use the side buttons

The buttons on the pen can be set to two different customizable functions. You can use the buttons whenever the pen tip is within 10mm of the tablet active area. You do not have to touch the pen tip to the tablet in order to use the switch.

Pen Nib Replacement

The nib will be wear off after using for a long time, then you need to replace a new nib.

1. Anticlockwise rotate the pen holder to open the cover, take a new nib out.
2. Insert the pen nib into the hole on the bottom of the holder and tilt the pen to pull out the old nib.
3. Insert the new nib straight into the pen and push the nib slowly and firmly until it stops.

After-service Contact

If you have any questions or issues with the product, please contact Huion customer service for assistance.

Precautions

【Please read this manual carefully before using, and keep it well for future reference.】

• Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do not use any kind of detergents.
• Don’t expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock.
• Do not place the tablet on where is unstable or a height for children reaching easily in order to avoid danger. Prevent children from swallowing the pen nib or side switch. The pen nib, side switch, or other movable parts may accidentally be pulled out if children are biting on them.
• Power off your tablet in locations where/when electronic devices is not allowed. Because the tablet may cause other electronic devices to malfunction in some locations where/when the use of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet.
• Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or pen. Such action may cause heat generation, ignition, electronic shock, or other damage, including human injury. Disassembling the product will void your warranty.
• While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks or other dangers. –Do not insert foreign material into the USB port or any other opening of this product. If a metal object or foreign material is inserted into a port or other opening of this product it may cause the product to malfunction or burn out, or cause electronic shock.

Product Overview

Tablet Introduction

Thanks for choosing HUION® INSPIROY® HS611 creative pen tablet. This is a new generation of professional battery-free drawing tablet, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely painting and writing, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience. To give you a better understanding and using of your tablet, please read this user manual carefully. The user manual only shows the information under Windows, unless otherwise specified, this information applies to both Windows and Mac systems.

Product and Accessories

Accessories

Tablet Connection

Connecting to Computer

Connect the tablet to your computer with USB cable.

1. Take out the Usb cable from the package, then connect tablet to your computer.
2. Open the driver interface, the lower corner shows device connected, indicating that the tablet is successfully connected to the computer. You can start use the tablet.
3. Take out the USB cable from the package.
4. Connect the tablet to your computer using the USB cable.
5. Open the driver interface.
6. The lower corner of the interface shows the device connected, indicating that the tablet is successfully connected to the computer.
7. You can start using the tablet.

Install Driver

OS Support
Windows 7 or later, macOS 10.12 or later.

Install Driver
Please download the driver from our website: www.huion.com/download. After finishing installation, you can find the driver icon ” ” in the system tray area, which means the driver was installed successfully; when you connect the tablet to computer, the icon will change to color ” “, which means the driver has already recognized the tablet and you can start using it now.

Notes:

1. Before installing, you need to uninstall other driver of similar products, including the old driver of this product.
2. Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistake.

Driver Page
After the download is successful, double-click to open the driver, Connect the tablet to your computer and phone using a USB cable. When the connection is complete, watch for a prompt at the bottom left of the driver page that displays two states: “Device disconnected” or “Device connected”.

Function Setting

Working Area Setting

Using Multiple Monitors
Select the Working Area tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default the entire active area of tablet maps to the entire monitor. If more than one monitor is in use and you are in extended mode, you need to choose the related monitor on the driver interface which you are going to map to.

Working Area Setting
Define the tablet area that will be mapped to the screen area.

1. Full Area: the entire active area of the tablet. This is the default setting.
2. Screen Ratio: As a general rule, be 16:9.
3. Customized Area:
4. Enter coordinate values.
5. Drag the corners of the foreground graphic to select the screen area.

Rotate Working Area
By changing the direction of the tablet to adapt to the left and right hand operation. You can rotate the tablet by 0° , 90° , 180° or 270° .

Tablet Setting

Click the ” ” in the upper right corner of the driver to set the Tablet, including General settings, Hotkeys and Updates.

General settings
Add App: Shortcut key function can be set by adding different programs. When opening different programs, the driver will automatically recognize that the shortcut function is the corresponding function set.

Hotkeys settings
Set the shortcut key to quickly open the driver interface. The default value is Ctrl+Alt+H, which can be set according to usage habits.

Updates
You can view the driver version number, click “Check for Update”, view the latest driver version, and update according to the system prompt.

Press Keys Function Setting

Default Setting： Place the cursor on the press key or click the press key to find the default values.
Customized Setting ：Select the function to be achieved on the pop-up dialog box, then click “Apply” or “OK” to take effect.
Enable/Disable Press Keys: Check/Uncheck “Enable Press Keys”.

The following shortcut key customization interface is displayed, with a total of 5 Settings.

1. Custom: according to the use of custom or professional terms to set.
2. Key combination function keys: Ctrl, Shift, Alt, Win+ any letter or other. Ctrl, Shift, Alt, Win, you can select one or more of them, and you can arrange them in any combination. Enter the corresponding Settings in the input box. For example: deselect -ctrl +D, enter task manager -ctrl +Alt+Delete, etc.
3. Mouse Button Function: click the box, select the required function, can be set to complete.
4. Switch function: also click the box, select the required function.
5. Run the program function: click browse, select the connection, to achieve the required run the program function.

Pen Buttons Function Setting

Select the function to be achieved on the pop-up dialog box, then click “Apply” or “OK” to take effect.

Enable the Windows Ink feature

Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6 and so on.

Pressure Sensitivity Setting

The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive.

Drag upward (left): the pressure change is more obvious, small pressure produces a great pressure. Drag down (right): pressure change is weak, a lot of pressure produces less pressure. Click the button at the bottom right of the Settings box to reset the pressure sensitivity to the default state.
For example: apply *N respectively the same pressure, under different pressure coefficient produced different pressure effect. According to their habit of holding the pen posture and the size of the hand for the appropriate pressure Settings.

Pen Pressure Testing

You can gradually apply pressure to the stylus on the screen to test the pressure level. Click ” ” button to clear all the ink.

Pen Nib Activity Setting

The pen nibs can be set to be Active/Inactive as needed.Click the drop-down option to select, and click OK again to save the Settings. In Active mode, the digital pen can be used normally. In Inactive mode, the digital pen has cursor movement, but cannot complete the specified action.

Data Export and Import

The driver supports exporting and importing your custom configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings.

Specifications

Trouble Shooting

After-service Contact

SHENZHEN HUION ANIMATION TECHNOLOGY CO., LTD.
Bldg 28, Quarter 4,
HuaiDeCuiGang Industrial Park,
Fuyong Street,
Bao’an District,
Shenzhen,
518106,
China

+86-755-32998548
www.huion.com
www.facebook.com
huionservice@huion.com
huion-skype
https://twitter.com/HuionTab

References

• Creative Pen Displays & Tablets for Drawing - Huion
• Creative Pen Displays & Tablets for Drawing - Huion
• huion.com/download
• huion.com/es/download
• Creative Pen Displays & Tablets for Drawing - Huion
• huion.com/it/download
• huion.com/jp/download/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>