Schneider Electric GV3APN01 Extended Rotary Handle Kit Installation Guide
- June 10, 2024
- Schneider Electric
Table of Contents
GV3APN01 Extended Rotary Handle Kit
Installation Guide
GV3APN01 Extended Rotary Handle Kit
GV3APN
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences
arising out of the use of this material.
© 2016 Schneider Electric – All rights reserved.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. For use in the USA, refer to NFPA 70E.
- This equipment must be installed and serviced only by qualified electrical personnel.
- Turn off all power supplying this equipment before working on or inside equipment.
- Always use a properly rated voltage sensing device to confirm power is off. Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
After installation:
- Replace all devices, doors, and covers before turning on power to this equipment.
- Always check that the handle is positioned correctly in relation to the circuit breaker.
- Check that the door cannot be opened when the door interlock mechanism and the circuit breaker are set to ON.
Failure to follow these instructions will result in death or serious injury.
www.schneider-electric.com
AAV96288-04
04 – 2016
1/6
Schneider Electric Industries SAS
35, rue Joseph Monier
92506 Rueil Malmaison
France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>