CENTRAL PNEUMATIC 46309 Brad Nailer Owner’s Manual
- June 10, 2024
- CENTRAL PNEUMATIC
Table of Contents
46309 Brad Nailer
Replacement Parts
CENTRAL PNEUMATIC
18 Gauge 3/8 In. to 2 In. Brad Nailer
Item# 46309
UPC: N/A
Part# Description
29174 SAFETY (NEW)
Diagram Ref# Price
56 $1.98
Product Information
- Product Name: Central Pneumatic 18 Gauge 3/8 In. to 2 In. Brad Nailer
- Product Item#: 46309
- UPC: N/A
- Replacement Part#: 29174
- Replacement Part Description: Safety (New)
- Diagram Ref#: 56
- Price: $ 1.98
Product Usage Instructions
- Before using the nailer, ensure that you have read the user manual and all safety instructions carefully.
- Ensure that the nailer is properly lubricated and clean before use.
- Adjust the depth setting of the nailer according to the thickness of the material being nailed.
- Load the brads into the magazine of the nailer.
- Place the tip of the nailer onto the material to be nailed.
- Press the trigger to release a brad into the material.
- Repeat steps 5 and 6 until the nailing is complete.
- After use, disconnect the air supply and empty any remaining brads from the magazine of the nailer.
- Clean the nailer thoroughly and store it in a dry place.
Please note that parts, prices, and availability are subject to change without notice. Always ensure that the replacement part number matches the part you intend to purchase.
Parts, prices and availability are subject to change without notice
Please ensure the item number matches the item you purchased
Rev 2022.007a
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>