BOFAN BF-G2 Portable Mini Wireless Speaker User Manual

BOFAN BF-G2 Portable Mini Wireless Speaker

Thank you for purchasing this Mini Wireless Speaker. Please read all instructions carefully before using and retain this manual for future use and reference.

Product Information

Portable Wireless Speaker

This Portable Wireless Speaker is a compact and convenient audio device that offers a range of features, including Bluetooth connectivity, FM radio, hands- free calling, and support for USB disks and TF cards. With a rechargeable 300mAh lithium battery, this speaker offers up to 10 meters of wireless coverage, making it the perfect portable audio companion for any occasion.

Button Functions

• Mode key(switch to Bluetooth/TF card/FM mode)
• Previous song/previous radio/turn down volume when press long
• Next song/next radio/turn up volume when press long
• Pause/play press twice to ring up a call/press once to answer a call/search radio when press long

Pairing the Speaker

1. Ensure the speaker is turned off.
2. Turn on the speaker again. Once the blue LED light is flashing, the speaker is ready to pair.
3. Place the speaker and the Bluetooth device within the operating distance of 8m.
4. Ensure Bluetooth is enabled on your phone or music device.
5. Search and select the name AVATAR-SPEAKER from the list of available pairing options.
6. Once the speaker is paired with the desired device, it will remember and pair it automatically.

Charging the Speaker

1. The speaker comes with a built-in rechargeable battery. Before use, charge the battery fully with the supplied cable.
2. Connect the USB cable to a computer USB port and the Micro USB plug to the charging port of the speaker. The red LED light will illuminate while the speaker is charging.
3. A full charge of the battery takes around 1 hour. Once fully charged, the red LED light will turn off.

Safety Instructions

• Keep the unit away from heat sources, direct sunlight and corrosive liquid.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipmpnt should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not puncture or harm the exterior surface of the production in any way.
• Keep the unit free from dust, lint,etc.
• This product is not a toy, Keep out of reach of children.
• Do not use the unit at excessive levels as this may damage hearing.

How to use FM radio:

| Please insert USB Cable to Micro port, which works as external antenna to strengthen radio signal *

Package Includes

• 1*Speaker
• 1*Manual
• 1*Charging cable

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The devices have been evaluated to meet general RF exposure requirements; the device can be used in portable exposure conditions without restriction.

Product Usage Instructions

1. Turn on the speaker by pressing and holding the power button for a few seconds.
2. To switch between Bluetooth/TF card/FM mode, press the mode button until the desired mode is selected.
3. To play music from a USB disk, insert the USB disk into the USB port.
4. To pair the speaker with your Bluetooth device:
5. Ensure the speaker is turned off.
6. Turn on the speaker again. Once the blue LED light is flashing, the speaker is ready to pair.
7. Ensure Bluetooth is enabled on your phone or music device.
8. Search and select the name AVATAR-SPEAKER from the list of available pairing options.
9. To answer a call, press the pause/play button once. To end a call, press the button again.
10. To adjust the volume, press and hold the previous song and next song buttons, respectively.
11. To search for a radio station, press and hold the pause/play button until it starts scanning.
12. To charge the speaker, connect the USB cable to a computer USB port and the Micro USB plug to the charging port of the speaker.
    The red LED light will illuminate while the speaker is charging.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>