Hard Head 016912 Spreader Wagon Instruction Manual
- June 4, 2024
- Hard Head
Table of Contents
Hard Head 016912 Spreader Wagon
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions)
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
DESCRIPTION
- Wheel axle
- Wheel
- Washer
- ScrewM5x12
- Hub cap
- Attachment
- Container
- Screw ST3.5 x 16
- Plastic grip
- Adjustment arm
- Handle
- Screw ST4.2 x 13
FIG. 1
ASSEMBLY
FITTING THE WHEELS
-
Putt he wheels (2) on the axle (1).
Place a washer (3) on the wheel axle outside each wheel and lock with the screws (4) MS x 10. -
Fit the wheel caps (5) on the wheels.
FITTING ATTACHMENT ON CONTAINER
- Put the attachment (6) on the container (7).
- Lock with the screw (8).
FITTING ADJUSTMENT ARM
Join the adjustment arm (10) and plastic grip (9).
FITTING THE HANDLE
- Join the two parts of the handle (11) and lock with the screws (12).
- Put the handle through the holes in the top side of the container (7) and lock with the screws (12).
USE
- Set the adjustment arm to o.
- Fill the container with the material to be spread.
- Adjust the flow of material with the adjustment arm.
JULA AB, BOX 363, SE-532 24 SKARA
2022-03-11
© Jula AB
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>